The patch below moves the cpu hotplugging higher up in the cpufreq
layering; this is needed to avoid recursive taking of the cpu hotplug
lock and to otherwise detangle the mess.

The new rules are:
1. you must do lock_cpu_hotplug() around the following functions:
   __cpufreq_driver_target
   __cpufreq_governor (for CPUFREQ_GOV_LIMITS operation only)
   __cpufreq_set_policy
2. governer methods (.governer) must NOT take the lock_cpu_hotplug()
   lock in any way; they are called with the lock taken already
3. if your governer spawns a thread that does things, like calling
   __cpufreq_driver_target, your thread must honor rule #1.
4. the policy lock and other cpufreq internal locks nest within
   the lock_cpu_hotplug() lock.

I'm not entirely happy about how the __cpufreq_governor rule ended up
(conditional locking rule depending on the argument) but basically all
callers pass this as a constant so it's not too horrible.

The patch also removes the cpufreq_governor() function since during the
locking audit it turned out to be entirely unused (so no need to fix it)

The patch works on my testbox, but it could use more testing
(otoh... it can't be much worse than the current code)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Treat HW coordination as independent CPUs.
This enables per-cpu monintoring of P-states

http://bugzilla.kernel.org/show_bug.cgi?id=5737

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (65 commits)
  ACPI: suppress power button event on S3 resume
  ACPI: resolve merge conflict between sem2mutex and processor_perflib.c
  ACPI: use for_each_possible_cpu() instead of for_each_cpu()
  ACPI: delete newly added debugging macros in processor_perflib.c
  ACPI: UP build fix for bugzilla-5737
  Enable P-state software coordination via _PDC
  P-state software coordination for speedstep-centrino
  P-state software coordination for acpi-cpufreq
  P-state software coordination for ACPI core
  ACPI: create acpi_thermal_resume()
  ACPI: create acpi_fan_suspend()/acpi_fan_resume()
  ACPI: pass pm_message_t from acpi_device_suspend() to root_suspend()
  ACPI: create acpi_device_suspend()/acpi_device_resume()
  ACPI: replace spin_lock_irq with mutex for ec poll mode
  ACPI: Allow a WAN module enable/disable on a Thinkpad X60.
  sem2mutex: acpi, acpi_link_lock
  ACPI: delete unused acpi_bus_drivers_lock
  sem2mutex: drivers/acpi/processor_perflib.c
  ACPI add ia64 exports to build acpi_memhotplug as a module
  ACPI: asus_acpi_init(): propagate correct return value
  ...

Manual resolve of conflicts in:

	arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
	arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
	include/acpi/processor.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

http://bugzilla.kernel.org/show_bug.cgi?id=5737

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This one fell through the automation at first because it initializes the
semaphore to locked, but that's easily remedied

Signed-off-by:  Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Dave Jones <davej@redhat.com>

 drivers/cpufreq/cpufreq.c |   37 +++++++++++++++++++------------------
 include/linux/cpufreq.h   |    3 ++-
 2 files changed, 21 insertions(+), 19 deletions(-)

What is the value shown in "cpu MHz" of /proc/cpuinfo when CPUs are capable of
changing frequency?

Today the answer is: It depends.
On i386:
SMP kernel - It is always the boot frequency
UP kernel - Scales with the frequency change and shows that was last set.

On x86_64:
There is one single variable cpu_khz that gets written by all the CPUs. So,
the frequency set by last CPU will be seen on /proc/cpuinfo of all the
CPUs in the system. What you see also depends on whether you have constant_tsc
capable CPU or not.

On ia64:
It is always boot time frequency of a particular CPU that gets displayed.

The patch below changes this to:
Show the last known frequency of the particular CPU, when cpufreq is present. If
cpu doesnot support changing of frequency through cpufreq, then boot frequency
will be shown. The patch affects i386, x86_64 and ia64 architectures.

Signed-off-by: Venkatesh Pallipadi<venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix u32 vs pm_message_t confusion in cpufreq.

Signed-off-by: Bernard Blackham <bernard@blackham.com.au>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix up comment in cpufreq.h stating transition latency should be passed
in microseconds -- it was decided long ago to switch to nanoseconds.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>