linux-toradex.git/include/linux/cpuset.h, branch v4.14-rc5

sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs

2017-09-07T09:45:21+00:00

Cpusets vs. suspend-resume is _completely_ broken. And it got noticed
because it now resulted in non-cpuset usage breaking too.

On suspend cpuset_cpu_inactive() doesn't call into
cpuset_update_active_cpus() because it doesn't want to move tasks about,
there is no need, all tasks are frozen and won't run again until after
we've resumed everything.

But this means that when we finally do call into
cpuset_update_active_cpus() after resuming the last frozen cpu in
cpuset_cpu_active(), the top_cpuset will not have any difference with
the cpu_active_mask and this it will not in fact do _anything_.

So the cpuset configuration will not be restored. This was largely
hidden because we would unconditionally create identity domains and
mobile users would not in fact use cpusets much. And servers what do use
cpusets tend to not suspend-resume much.

An addition problem is that we'd not in fact wait for the cpuset work to
finish before resuming the tasks, allowing spurious migrations outside
of the specified domains.

Fix the rebuild by introducing cpuset_force_rebuild() and fix the
ordering with cpuset_wait_for_hotplug().

Reported-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: 
Cc: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Rafael J. Wysocki 
Cc: Tejun Heo 
Cc: Thomas Gleixner 
Fixes: deb7aa308ea2 ("cpuset: reorganize CPU / memory hotplug handling")
Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar

cpuset: Make nr_cpusets private

2017-08-10T10:28:57+00:00

Any use of key->enabled (that is static_key_enabled and static_key_count)
outside jump_label_lock should handle its own serialization.  In the case
of cpusets_enabled_key, the key is always incremented/decremented under
cpuset_mutex, and hence the same rule applies to nr_cpusets.  The rule
*is* respected currently, but the mutex is static so nr_cpusets should
be static too.

Signed-off-by: Paolo Bonzini 
Signed-off-by: Peter Zijlstra (Intel) 
Acked-by: Zefan Li 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1501601046-35683-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar

cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()

2017-08-03T00:16:12+00:00

In codepaths that use the begin/retry interface for reading
mems_allowed_seq with irqs disabled, there exists a race condition that
stalls the patch process after only modifying a subset of the
static_branch call sites.

This problem manifested itself as a deadlock in the slub allocator,
inside get_any_partial.  The loop reads mems_allowed_seq value (via
read_mems_allowed_begin), performs the defrag operation, and then
verifies the consistency of mem_allowed via the read_mems_allowed_retry
and the cookie returned by xxx_begin.

The issue here is that both begin and retry first check if cpusets are
enabled via cpusets_enabled() static branch.  This branch can be
rewritted dynamically (via cpuset_inc) if a new cpuset is created.  The
x86 jump label code fully synchronizes across all CPUs for every entry
it rewrites.  If it rewrites only one of the callsites (specifically the
one in read_mems_allowed_retry) and then waits for the
smp_call_function(do_sync_core) to complete while a CPU is inside the
begin/retry section with IRQs off and the mems_allowed value is changed,
we can hang.

This is because begin() will always return 0 (since it wasn't patched
yet) while retry() will test the 0 against the actual value of the seq
counter.

The fix is to use two different static keys: one for begin
(pre_enable_key) and one for retry (enable_key).  In cpuset_inc(), we
first bump the pre_enable key to ensure that cpuset_mems_allowed_begin()
always return a valid seqcount if are enabling cpusets.  Similarly, when
disabling cpusets via cpuset_dec(), we first ensure that callers of
cpuset_mems_allowed_retry() will start ignoring the seqcount value
before we let cpuset_mems_allowed_begin() return 0.

The relevant stack traces of the two stuck threads:

  CPU: 1 PID: 1415 Comm: mkdir Tainted: G L  4.9.36-00104-g540c51286237 #4
  Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
  task: ffff8817f9c28000 task.stack: ffffc9000ffa4000
  RIP: smp_call_function_many+0x1f9/0x260
  Call Trace:
    smp_call_function+0x3b/0x70
    on_each_cpu+0x2f/0x90
    text_poke_bp+0x87/0xd0
    arch_jump_label_transform+0x93/0x100
    __jump_label_update+0x77/0x90
    jump_label_update+0xaa/0xc0
    static_key_slow_inc+0x9e/0xb0
    cpuset_css_online+0x70/0x2e0
    online_css+0x2c/0xa0
    cgroup_apply_control_enable+0x27f/0x3d0
    cgroup_mkdir+0x2b7/0x420
    kernfs_iop_mkdir+0x5a/0x80
    vfs_mkdir+0xf6/0x1a0
    SyS_mkdir+0xb7/0xe0
    entry_SYSCALL_64_fastpath+0x18/0xad

  ...

  CPU: 2 PID: 1 Comm: init Tainted: G L  4.9.36-00104-g540c51286237 #4
  Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
  task: ffff8818087c0000 task.stack: ffffc90000030000
  RIP: int3+0x39/0x70
  Call Trace:
    <#DB> ? ___slab_alloc+0x28b/0x5a0
     ? copy_process.part.40+0xf7/0x1de0
    __slab_alloc.isra.80+0x54/0x90
    copy_process.part.40+0xf7/0x1de0
    copy_process.part.40+0xf7/0x1de0
    kmem_cache_alloc_node+0x8a/0x280
    copy_process.part.40+0xf7/0x1de0
    _do_fork+0xe7/0x6c0
    _raw_spin_unlock_irq+0x2d/0x60
    trace_hardirqs_on_caller+0x136/0x1d0
    entry_SYSCALL_64_fastpath+0x5/0xad
    do_syscall_64+0x27/0x350
    SyS_clone+0x19/0x20
    do_syscall_64+0x60/0x350
    entry_SYSCALL64_slow_path+0x25/0x25

Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com
Fixes: 46e700abc44c ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled")
Signed-off-by: Dima Zavin 
Reported-by: Cliff Spradlin 
Acked-by: Vlastimil Babka 
Cc: Peter Zijlstra 
Cc: Christopher Lameter 
Cc: Li Zefan 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Mel Gorman 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

cpuset: Remove cpuset_update_active_cpus()'s parameter.

2017-04-10T23:57:54+00:00

In cpuset_update_active_cpus(), cpu_online isn't used anymore. Remove
it.

Signed-off-by: Rakib Mullick
Acked-by: Zefan Li 
Signed-off-by: Tejun Heo

sched/headers: Prepare to move the task_lock()/unlock() APIs to

2017-03-02T07:42:38+00:00

But first update the code that uses these facilities with the
new header.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:26+00:00

We are going to split  out of , which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

cpuset: use static key better and convert to new API

2016-05-20T02:12:14+00:00

An important function for cpusets is cpuset_node_allowed(), which
optimizes on the fact if there's a single root CPU set, it must be
trivially allowed.  But the check "nr_cpusets() <= 1" doesn't use the
cpusets_enabled_key static key the right way where static keys eliminate
branching overhead with jump labels.

This patch converts it so that static key is used properly.  It's also
switched to the new static key API and the checking functions are
converted to return bool instead of int.  We also provide a new variant
__cpuset_zone_allowed() which expects that the static key check was
already done and they key was enabled.  This is needed for
get_page_from_freelist() where we want to also avoid the relatively
slower check when ALLOC_CPUSET is not set in alloc_flags.

The impact on the page allocator microbenchmark is less than expected
but the cleanup in itself is worthwhile.

                                             4.6.0-rc2                  4.6.0-rc2
                                       multcheck-v1r20               cpuset-v1r20
  Min      alloc-odr0-1               348.00 (  0.00%)           348.00 (  0.00%)
  Min      alloc-odr0-2               254.00 (  0.00%)           254.00 (  0.00%)
  Min      alloc-odr0-4               213.00 (  0.00%)           213.00 (  0.00%)
  Min      alloc-odr0-8               186.00 (  0.00%)           183.00 (  1.61%)
  Min      alloc-odr0-16              173.00 (  0.00%)           171.00 (  1.16%)
  Min      alloc-odr0-32              166.00 (  0.00%)           163.00 (  1.81%)
  Min      alloc-odr0-64              162.00 (  0.00%)           159.00 (  1.85%)
  Min      alloc-odr0-128             160.00 (  0.00%)           157.00 (  1.88%)
  Min      alloc-odr0-256             169.00 (  0.00%)           166.00 (  1.78%)
  Min      alloc-odr0-512             180.00 (  0.00%)           180.00 (  0.00%)
  Min      alloc-odr0-1024            188.00 (  0.00%)           187.00 (  0.53%)
  Min      alloc-odr0-2048            194.00 (  0.00%)           193.00 (  0.52%)
  Min      alloc-odr0-4096            199.00 (  0.00%)           198.00 (  0.50%)
  Min      alloc-odr0-8192            202.00 (  0.00%)           201.00 (  0.50%)
  Min      alloc-odr0-16384           203.00 (  0.00%)           202.00 (  0.49%)

Signed-off-by: Vlastimil Babka 
Signed-off-by: Mel Gorman 
Acked-by: Zefan Li 
Cc: Jesper Dangaard Brouer 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback

2016-04-25T19:45:14+00:00

Since e93ad19d0564 ("cpuset: make mm migration asynchronous"), cpuset
kicks off asynchronous NUMA node migration if necessary during task
migration and flushes it from cpuset_post_attach_flush() which is
called at the end of __cgroup_procs_write().  This is to avoid
performing migration with cgroup_threadgroup_rwsem write-locked which
can lead to deadlock through dependency on kworker creation.

memcg has a similar issue with charge moving, so let's convert it to
an official callback rather than the current one-off cpuset specific
function.  This patch adds cgroup_subsys->post_attach callback and
makes cpuset register cpuset_post_attach_flush() as its ->post_attach.

The conversion is mostly one-to-one except that the new callback is
called under cgroup_mutex.  This is to guarantee that no other
migration operations are started before ->post_attach callbacks are
finished.  cgroup_mutex is one of the outermost mutex in the system
and has never been and shouldn't be a problem.  We can add specialized
synchronization around __cgroup_procs_write() but I don't think
there's any noticeable benefit.

Signed-off-by: Tejun Heo 
Cc: Li Zefan 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc:  # 4.4+ prerequisite for the next patch

cpuset: make mm migration asynchronous

2016-01-22T15:22:46+00:00

If "cpuset.memory_migrate" is set, when a process is moved from one
cpuset to another with a different memory node mask, pages in used by
the process are migrated to the new set of nodes.  This was performed
synchronously in the ->attach() callback, which is synchronized
against process management.  Recently, the synchronization was changed
from per-process rwsem to global percpu rwsem for simplicity and
optimization.

Combined with the synchronous mm migration, this led to deadlocks
because mm migration could schedule a work item which may in turn try
to create a new worker blocking on the process management lock held
from cgroup process migration path.

This heavy an operation shouldn't be performed synchronously from that
deep inside cgroup migration in the first place.  This patch punts the
actual migration to an ordered workqueue and updates cgroup process
migration and cpuset config update paths to flush the workqueue after
all locks are released.  This way, the operations still seem
synchronous to userland without entangling mm migration with process
management synchronization.  CPU hotplug can also invoke mm migration
but there's no reason for it to wait for mm migrations and thus
doesn't synchronize against their completions.

Signed-off-by: Tejun Heo 
Reported-and-tested-by: Christian Borntraeger 
Cc: stable@vger.kernel.org # v4.4+

mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled

2015-11-07T01:50:42+00:00

There is a seqcounter that protects against spurious allocation failures
when a task is changing the allowed nodes in a cpuset.  There is no need
to check the seqcounter until a cpuset exists.

Signed-off-by: Mel Gorman 
Acked-by: Christoph Lameter 
Acked-by: David Rientjes 
Acked-by: Vlastimil Babka 
Acked-by: Michal Hocko 
Acked-by: Johannes Weiner 
Cc: Vitaly Wool 
Cc: Rik van Riel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds