linux-toradex.git/include/linux/dccp.h, branch tegra-10.9.9

dccp: Initialisation and type-checking of feature sysctls

2009-01-21T22:34:05+00:00

This patch takes care of initialising and type-checking sysctls
related to feature negotiation. Type checking is important since some
of the sysctls now directly impact the feature-negotiation process.

The sysctls are initialised with the known default values for each
feature.  For the type-checking the value constraints from RFC 4340
are used:

 * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes),
   tested and confirmed that it works up to 4294967295 - for Gbps speed;
 * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer);
 * CCIDs are between 0 .. 255;
 * request_retries, retries1, retries2 also between 0..255 for good measure;
 * tx_qlen is checked to be non-negative;
 * sync_ratelimit remains as before.

Notes:
------
 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c.
 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in
    other places, sometimes with exactly the same kind of definitions (e.g.
    "static int zero;"). It may be a good idea (kernel janitors?) to consolidate
    type checking. For the sake of keeping the changeset small and in order not
    to affect other subsystems, I have not strived to generalise here.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Implement both feature-local and feature-remote Sequence Window feature

2009-01-21T22:34:04+00:00

This adds full support for local/remote Sequence Window feature, from which the
  * sequence-number-validity (W) and
  * acknowledgment-number-validity (W') windows
derive as specified in RFC 4340, 7.5.3.

Specifically, the following is contained in this patch:
  * integrated new socket fields into dccp_sk;
  * updated the update_gsr/gss routines with regard to these fields;
  * updated handler code: the Sequence Window feature is located at the TX side,
    so the local feature is meant if the handler-rx flag is false;
  * the initialisation of `rcv_wnd' in reqsk is removed, since
    - rcv_wnd is not used by the code anywhere;
    - sequence number checks are not done in the LISTEN state (cf. 7.5.3);
    - dccp_check_req checks the Ack number validity more rigorously;
  * the `struct dccp_minisock' became empty and is now removed.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Initialisation framework for feature negotiation

2009-01-21T22:34:04+00:00

This initialises feature negotiation from two tables, which are in
turn are initialised from sysctls.

As a novel feature, specifics of the implementation (e.g. that short
seqnos and ECN are not yet available) are advertised for robustness.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp ccid-2: Phase out the use of boolean Ack Vector sysctl

2008-12-08T09:19:06+00:00

This removes the use of the sysctl and the minisock variable for the Send Ack
Vector feature, as it now is handled fully dynamically via feature negotiation
(i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per
 RFC 4341, 4.).

Using a sysctl in parallel to this implementation would open the door to
crashes, since much of the code relies on tests of the boolean minisock /
sysctl variable. Thus, this patch replaces all tests of type

	if (dccp_msk(sk)->dccpms_send_ack_vector)
		/* ... */
with
	if (dp->dccps_hc_rx_ackvec != NULL)
		/* ... */

The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature
negotiation concluded that Ack Vectors are to be used on the half-connection.
Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child),
so that the test is a valid one.

The activation handler for Ack Vectors is called as soon as the feature
negotiation has concluded at the
 * server when the Ack marking the transition RESPOND => OPEN arrives;
 * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN.

Adding the sequence number of the Response packet to the Ack Vector has been
removed, since
 (a) connection establishment implies that the Response has been received;
 (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e.
     this entry will always be ignored;
 (c) it can not be used for anything useful - to detect loss for instance, only
     packets received after the loss can serve as pseudo-dupacks.

There was a FIXME to change the error code when dccp_ackvec_add() fails.
I removed this after finding out that:
 * the check whether ackno < ISN is already made earlier,
 * this Response is likely the 1st packet with an Ackno that the client gets,
 * so when dccp_ackvec_add() fails, the reason is likely not a packet error.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Remove manual influence on NDP Count feature

2008-12-08T09:18:37+00:00

Updating the NDP count feature is handled automatically now:
 * for CCID-2 it is disabled, since the code does not use NDP counts;
 * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths.

Allowing the user to change NDP values leads to unpredictable and failing
behaviour, since it is then possible to disable NDP counts even when they
are needed (e.g. in CCID-3).

This means that only those user settings are sensible that agree with the
values for Send NDP Count implied by the choice of CCID. But those settings
are already activated by the feature negotiation (CCID dependency tracking),
hence this form of support is redundant.

At startup the initialisation of the NDP count feature uses the default
value of 0, which is done implicitly by the zeroing-out of the socket when
it is allocated. If the choice of CCID or feature negotiation enables NDP
count, this will then be updated via the NDP activation handler.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Remove obsolete parts of the old CCID interface

2008-12-08T09:18:05+00:00

The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector
case, their value equals initially that of the sysctl, but at the end of
feature negotiation may be something different.

The old interface removed by this patch thus has been replaced by the newer
interface to dynamically query the currently loaded CCIDs.

Also removed are the constructors for the TX CCID and the RX CCID, since the
switch "rx <-> non-rx" is done by the handler in minisocks.c (and the handler
is the only place in the code where CCIDs are loaded).

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Set per-connection CCIDs via socket options

2008-11-24T00:02:31+00:00

With this patch, TX/RX CCIDs can now be changed on a per-connection
basis, which overrides the defaults set by the global sysctl variables
for TX/RX CCIDs.

To make full use of this facility, the remaining patches of this patch
set are needed, which track dependencies and activate negotiated
feature values.

Signed-off-by: Gerrit Renker 
Signed-off-by: David S. Miller

dccp: Deprecate Ack Ratio sysctl

2008-11-17T06:55:08+00:00

This patch deprecates the Ack Ratio sysctl, since
 * Ack Ratio is entirely ignored by CCID-3 and CCID-4,
 * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1);
 * even if it would work in CCID-2, there is no point for a user to change it:
   - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2),
   - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts
     (since waiting for Acks which will never arrive in this window),
   - cwnd is not a user-configurable value.

The only reasonable place for Ack Ratio is to print it for debugging. It is
planned to do this later on, as part of e.g. dccp_probe.

With this patch Ack Ratio is now under full control of feature negotiation:
 * Ack Ratio is resolved as a dependency of the selected CCID;
 * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to
   the default of 2, following RFC 4340, 11.3 - "New connections start with Ack
   Ratio 2 for both endpoints";
 * what happens then is part of another patch set, since it concerns the
   dynamic update of Ack Ratio while the connection is in full flight.

Thanks to Tomasz Grobelny for discussion leading up to this patch.

Signed-off-by: Gerrit Renker 
Acked-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller

dccp: Feature negotiation for minimum-checksum-coverage

2008-11-17T06:53:48+00:00

This provides feature negotiation for server minimum checksum coverage
which so far has been missing.

Since sender/receiver coverage values range only from 0...15, their
type has also been reduced in size from u16 to u4.

Feature-negotiation options are now generated for both sender and receiver
coverage, i.e. when the peer has `forgotten' to enable partial coverage
then feature negotiation will automatically enable (negotiate) the partial
coverage value for this connection.

Signed-off-by: Gerrit Renker 
Acked-by: Ian McDonald 
Signed-off-by: David S. Miller

dccp: Deprecate old setsockopt framework

2008-11-17T06:51:23+00:00

The previous setsockopt interface, which passed socket options via struct
dccp_so_feat, is complicated/difficult to use. Continuing to support it leads to
ugly code since the old approach did not distinguish between NN and SP values.

This patch removes the old setsockopt interface and replaces it with two new
functions to register NN/SP values for feature negotiation. 
These are essentially wrappers around the internal __feat_register functions,
with checking added to avoid

 * wrong usage (type);
 * changing values while the connection is in progress.

Signed-off-by: Gerrit Renker 
Signed-off-by: David S. Miller