<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/include/linux/device-mapper.h, branch v5.12-rc5</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>dm table: Fix zoned model check and zone sectors check</title>
<updated>2021-03-22T16:32:31+00:00</updated>
<author>
<name>Shin'ichiro Kawasaki</name>
<email>shinichiro.kawasaki@wdc.com</email>
</author>
<published>2021-03-16T04:36:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=2d669ceb69c276f7637cf760287ca4187add082e'/>
<id>2d669ceb69c276f7637cf760287ca4187add082e</id>
<content type='text'>
Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.

The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.

As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.

To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.

Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Signed-off-by: Damien Le Moal &lt;damien.lemoal@wdc.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.

The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.

As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.

To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.

Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Signed-off-by: Damien Le Moal &lt;damien.lemoal@wdc.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: fix deadlock when swapping to encrypted device</title>
<updated>2021-02-11T14:45:28+00:00</updated>
<author>
<name>Mikulas Patocka</name>
<email>mpatocka@redhat.com</email>
</author>
<published>2021-02-10T20:26:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a666e5c05e7c4aaabb2c5d58117b0946803d03d2'/>
<id>a666e5c05e7c4aaabb2c5d58117b0946803d03d2</id>
<content type='text'>
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.

This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.

Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.

This is similar to request-based drivers - they will also block when the
number of requests is over the limit.

Signed-off-by: Mikulas Patocka &lt;mpatocka@redhat.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.

This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.

Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.

This is similar to request-based drivers - they will also block when the
number of requests is over the limit.

Signed-off-by: Mikulas Patocka &lt;mpatocka@redhat.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED</title>
<updated>2021-02-11T14:45:27+00:00</updated>
<author>
<name>Mike Snitzer</name>
<email>snitzer@redhat.com</email>
</author>
<published>2021-02-10T22:38:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e3290b9491ff5b7ee40f9e0a4c06821988a2a2bf'/>
<id>e3290b9491ff5b7ee40f9e0a4c06821988a2a2bf</id>
<content type='text'>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.

Suggested-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.

Suggested-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: add support for passing through inline crypto support</title>
<updated>2021-02-11T14:45:25+00:00</updated>
<author>
<name>Satya Tangirala</name>
<email>satyat@google.com</email>
</author>
<published>2021-02-01T05:10:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=aa6ce87a768226802f9a231b3909fe81c503852c'/>
<id>aa6ce87a768226802f9a231b3909fe81c503852c</id>
<content type='text'>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.

This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support.  When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices.  When an unsupported setting is used, the blk-crypto
fallback is used as usual.

Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it.  This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target.  Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't.  (dm-crypt could use inline crypto itself, though.)

A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities.  Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.

For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.

Co-developed-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Satya Tangirala &lt;satyat@google.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.

This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support.  When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices.  When an unsupported setting is used, the blk-crypto
fallback is used as usual.

Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it.  This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target.  Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't.  (dm-crypt could use inline crypto itself, though.)

A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities.  Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.

For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.

Co-developed-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Satya Tangirala &lt;satyat@google.com&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: remove special-casing of bio-based immutable singleton target on NVMe</title>
<updated>2020-10-07T22:08:41+00:00</updated>
<author>
<name>Mike Snitzer</name>
<email>snitzer@redhat.com</email>
</author>
<published>2020-10-07T19:15:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9c37de297f6590937f95a28bec1b7ac68a38618f'/>
<id>9c37de297f6590937f95a28bec1b7ac68a38618f</id>
<content type='text'>
Since commit 5a6c35f9af416 ("block: remove direct_make_request") there
is no benefit to DM special-casing NVMe. Remove all code used to
establish DM_TYPE_NVME_BIO_BASED.

Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since commit 5a6c35f9af416 ("block: remove direct_make_request") there
is no benefit to DM special-casing NVMe. Remove all code used to
establish DM_TYPE_NVME_BIO_BASED.

Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: add support for REQ_NOWAIT and enable it for linear target</title>
<updated>2020-09-25T14:20:03+00:00</updated>
<author>
<name>Konstantin Khlebnikov</name>
<email>khlebnikov@yandex-team.ru</email>
</author>
<published>2020-09-23T20:06:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6abc49468eeaad2dd481779906aaa29605139087'/>
<id>6abc49468eeaad2dd481779906aaa29605139087</id>
<content type='text'>
Add DM target feature flag DM_TARGET_NOWAIT which advertises that
target works with REQ_NOWAIT bios.

Add dm_table_supports_nowait() and update dm_table_set_restrictions()
to set/clear QUEUE_FLAG_NOWAIT accordingly.

Signed-off-by: Konstantin Khlebnikov &lt;khlebnikov@yandex-team.ru&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add DM target feature flag DM_TARGET_NOWAIT which advertises that
target works with REQ_NOWAIT bios.

Add dm_table_supports_nowait() and update dm_table_set_restrictions()
to set/clear QUEUE_FLAG_NOWAIT accordingly.

Signed-off-by: Konstantin Khlebnikov &lt;khlebnikov@yandex-team.ru&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block</title>
<updated>2020-08-03T18:57:03+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-08-03T18:57:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=382625d0d4325fb14a29444eb8dce8dcc2eb9b51'/>
<id>382625d0d4325fb14a29444eb8dce8dcc2eb9b51</id>
<content type='text'>
Pull core block updates from Jens Axboe:
 "Good amount of cleanups and tech debt removals in here, and as a
  result, the diffstat shows a nice net reduction in code.

   - Softirq completion cleanups (Christoph)

   - Stop using -&gt;queuedata (Christoph)

   - Cleanup bd claiming (Christoph)

   - Use check_events, moving away from the legacy media change
     (Christoph)

   - Use inode i_blkbits consistently (Christoph)

   - Remove old unused writeback congestion bits (Christoph)

   - Cleanup/unify submission path (Christoph)

   - Use bio_uninit consistently, instead of bio_disassociate_blkg
     (Christoph)

   - sbitmap cleared bits handling (John)

   - Request merging blktrace event addition (Jan)

   - sysfs add/remove race fixes (Luis)

   - blk-mq tag fixes/optimizations (Ming)

   - Duplicate words in comments (Randy)

   - Flush deferral cleanup (Yufen)

   - IO context locking/retry fixes (John)

   - struct_size() usage (Gustavo)

   - blk-iocost fixes (Chengming)

   - blk-cgroup IO stats fixes (Boris)

   - Various little fixes"

* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
  block: blk-timeout: delete duplicated word
  block: blk-mq-sched: delete duplicated word
  block: blk-mq: delete duplicated word
  block: genhd: delete duplicated words
  block: elevator: delete duplicated word and fix typos
  block: bio: delete duplicated words
  block: bfq-iosched: fix duplicated word
  iocost_monitor: start from the oldest usage index
  iocost: Fix check condition of iocg abs_vdebt
  block: Remove callback typedefs for blk_mq_ops
  block: Use non _rcu version of list functions for tag_set_list
  blk-cgroup: show global disk stats in root cgroup io.stat
  blk-cgroup: make iostat functions visible to stat printing
  block: improve discard bio alignment in __blkdev_issue_discard()
  block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
  block: defer flush request no matter whether we have elevator
  block: make blk_timeout_init() static
  block: remove retry loop in ioc_release_fn()
  block: remove unnecessary ioc nested locking
  block: integrate bd_start_claiming into __blkdev_get
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull core block updates from Jens Axboe:
 "Good amount of cleanups and tech debt removals in here, and as a
  result, the diffstat shows a nice net reduction in code.

   - Softirq completion cleanups (Christoph)

   - Stop using -&gt;queuedata (Christoph)

   - Cleanup bd claiming (Christoph)

   - Use check_events, moving away from the legacy media change
     (Christoph)

   - Use inode i_blkbits consistently (Christoph)

   - Remove old unused writeback congestion bits (Christoph)

   - Cleanup/unify submission path (Christoph)

   - Use bio_uninit consistently, instead of bio_disassociate_blkg
     (Christoph)

   - sbitmap cleared bits handling (John)

   - Request merging blktrace event addition (Jan)

   - sysfs add/remove race fixes (Luis)

   - blk-mq tag fixes/optimizations (Ming)

   - Duplicate words in comments (Randy)

   - Flush deferral cleanup (Yufen)

   - IO context locking/retry fixes (John)

   - struct_size() usage (Gustavo)

   - blk-iocost fixes (Chengming)

   - blk-cgroup IO stats fixes (Boris)

   - Various little fixes"

* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
  block: blk-timeout: delete duplicated word
  block: blk-mq-sched: delete duplicated word
  block: blk-mq: delete duplicated word
  block: genhd: delete duplicated words
  block: elevator: delete duplicated word and fix typos
  block: bio: delete duplicated words
  block: bfq-iosched: fix duplicated word
  iocost_monitor: start from the oldest usage index
  iocost: Fix check condition of iocg abs_vdebt
  block: Remove callback typedefs for blk_mq_ops
  block: Use non _rcu version of list functions for tag_set_list
  blk-cgroup: show global disk stats in root cgroup io.stat
  blk-cgroup: make iostat functions visible to stat printing
  block: improve discard bio alignment in __blkdev_issue_discard()
  block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
  block: defer flush request no matter whether we have elevator
  block: make blk_timeout_init() static
  block: remove retry loop in ioc_release_fn()
  block: remove unnecessary ioc nested locking
  block: integrate bd_start_claiming into __blkdev_get
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>dm integrity: fix integrity recalculation that is improperly skipped</title>
<updated>2020-07-23T18:39:37+00:00</updated>
<author>
<name>Mikulas Patocka</name>
<email>mpatocka@redhat.com</email>
</author>
<published>2020-07-23T14:42:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2'/>
<id>5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2</id>
<content type='text'>
Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.

The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic-&gt;recalc_wq, &amp;ic-&gt;recalc_work)
2. integrity_recalc (&amp;ic-&gt;recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic-&gt;ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.

To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().

Signed-off-by: Mikulas Patocka &lt;mpatocka redhat com&gt;
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.

The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic-&gt;recalc_wq, &amp;ic-&gt;recalc_work)
2. integrity_recalc (&amp;ic-&gt;recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic-&gt;ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.

To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().

Signed-off-by: Mikulas Patocka &lt;mpatocka redhat com&gt;
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>writeback: remove bdi-&gt;congested_fn</title>
<updated>2020-07-08T23:20:46+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2020-07-01T09:06:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=21cf866145047f8bfecb38ec8d2fed64464c074f'/>
<id>21cf866145047f8bfecb38ec8d2fed64464c074f</id>
<content type='text'>
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Song Liu &lt;song@kernel.org&gt;
Acked-by: David Sterba &lt;dsterba@suse.com&gt;
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Song Liu &lt;song@kernel.org&gt;
Acked-by: David Sterba &lt;dsterba@suse.com&gt;
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: use dynamic debug instead of compile-time config option</title>
<updated>2020-05-20T21:09:45+00:00</updated>
<author>
<name>Hannes Reinecke</name>
<email>hare@suse.de</email>
</author>
<published>2020-05-14T06:09:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=74244b59a82358b9f51c80981a99c5951ea3028f'/>
<id>74244b59a82358b9f51c80981a99c5951ea3028f</id>
<content type='text'>
Switch to use dynamic debug to avoid having recompile the kernel
just to enable debugging messages.

Signed-off-by: Hannes Reinecke &lt;hare@suse.de&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Switch to use dynamic debug to avoid having recompile the kernel
just to enable debugging messages.

Signed-off-by: Hannes Reinecke &lt;hare@suse.de&gt;
Signed-off-by: Mike Snitzer &lt;snitzer@redhat.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
