linux-toradex.git/include/linux/device.h, branch v2.6.23-rc5

Fix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"

2007-07-26T19:13:06+00:00

Commit bd804eba1c8597cbb7cd5a5f9fe886aae16a079a ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.

Signed-off-by: Rafael J. Wysocki 
Tested-by: YOSHIFUJI Hideaki / 吉藤英明 
Signed-off-by: Linus Torvalds

dev_vdbg(), available with -DVERBOSE_DEBUG

2007-07-18T22:49:50+00:00

This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG.
When enabled, dev_vdbg() acts just like dev_dbg().  When disabled, it is a
NOP ...  just like dev_dbg() without -DDEBUG.  The specific code was moved
out of a USB patch, but lots of drivers have similar support.

That is, code can now be written to use an additional level of debug
output, selected at compile time.  Many driver authors have found this
idiom to be very useful.  A typical usage model is for "normal" debug
messages to focus on fault paths and not be very "chatty", so that those
messages can be left on during normal operation without much of a
performance or syslog load.  On the other hand "verbose" messages would be
noisy enough that they wouldn't normally be enabled; they might even affect
timings enough to change system or driver behavior.

Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

driver-core: make devt_attr and uevent_attr static

2007-07-11T23:09:06+00:00

devt_attr and uevent_attr are either allocated dynamically with or
embedded in device and class_device as they needed their owner field
set to the module implementing the driver.  Now that sysfs implements
immediate disconnect and owner field removed from struct attribute,
there is no reason to do this.  Remove these attributes from
[class_]device and use static attribute structures instead.

Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

fix hotplug for legacy platform drivers

2007-05-08T18:15:10+00:00

We've had various reports of some legacy "probe the hardware" style
platform drivers having nasty problems with hotplug support.

The core issue is that those legacy drivers don't fully conform to the
driver model.  They assume a role that should be the responsibility of
infrastructure code: creating device nodes.

The "modprobe" step in hotplugging relies on drivers to have split those
roles into different modules.  The lack of this split causes the problems.
When a driver creates nodes for devices that don't exist (sending a hotplug
event), then exits (aborting one modprobe) before the "modprobe $MODALIAS"
step completes (by failing, since it's in the middle of a modprobe), the
result can be an endless loop of modprobe invocations ...  badness.

This fix uses the newish per-device flag controlling issuance of "add"
events.  (A previous version of this patch used a per-device "driver can
hotplug" flag, which only scrubbed $MODALIAS from the environment rather
than suppressing the entire hotplug event.) It also shrinks that flag to
one bit, saving a word in "struct device".

So the net of this patch is removing some nasty failures with legacy
drivers, while retaining hotplug capability for the majority of platform
drivers.

Signed-off-by: David Brownell 
Cc: Greg KH 
Cc: Andres Salomon 
Cc: Dominik Brodowski 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

2007-05-05T01:04:48+00:00

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  remove "struct subsystem" as it is no longer needed
  sysfs: printk format warning
  DOC: Fix wrong identifier name in Documentation/driver-model/devres.txt
  platform: reorder platform_device_del
  Driver core: fix show_uevent from taking up way too much stack

PCI: remove the broken PCI_MULTITHREAD_PROBE option

2007-05-03T02:02:38+00:00

This patch removes the PCI_MULTITHREAD_PROBE option that had already 
been marked as broken.

Signed-off-by: Adrian Bunk 
Signed-off-by: Greg Kroah-Hartman

remove "struct subsystem" as it is no longer needed

2007-05-03T01:57:59+00:00

We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman

dev_dbg: check dev_dbg() arguments

2007-04-27T17:57:34+00:00

Duplicate what Zach Brown did for pr_debug in commit
8b2a1fd1b394c60eaa2587716102dd5e9b4e5990

[akpm@linux-foundation.org: fix a couple of things which broke]
Signed-off-by: Dan Williams 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

device_schedule_callback() needs a module reference

2007-04-27T17:57:32+00:00

This patch (as896b) fixes an oversight in the design of
device_schedule_callback().  It is necessary to acquire a reference to the
module owning the callback routine, to prevent the module from being
unloaded before the callback can run.

Signed-off-by: Alan Stern 
Cc: Satyam Sharma 
Cc: Neil Brown 
Cc: Cornelia Huck 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

Driver core: add suspend() and resume() to struct device_type

2007-04-27T17:57:29+00:00

Driver core: add suspend() and resume() to struct device_type

In cases when there are devices of different types in the same class
we can't use class's implementation of suspend and resume methods and
we need to add them to struct device_type instead.

Also fix error handling in resume code (we should not try to call
class's resume method iof bus's resume method for the device failed.

Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman