linux-toradex.git/include/linux/dma, branch v5.0-rc3

Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-01-01T23:45:48+00:00

Pull dmaengine updates from Vinod Koul:
 "This includes a new driver, removes R-Mobile APE6 as it is no longer
  used, sprd cyclic dma support, last batch of dma_slave_config
  direction removal and random updates to bunch of drivers.

  Summary:
   - New driver for UniPhier MIO DMA controller
   - Remove R-Mobile APE6 support
   - Sprd driver updates and support for cyclic link-list
   - Remove dma_slave_config direction usage from rest of drivers
   - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers"

* tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits)
  dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: pxa: remove DBGFS_FUNC_DECL()
  dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: Documentation: Add documentation for multi chan testing
  dmaengine: dmatest: Add transfer_size parameter
  dmaengine: dmatest: Add alignment parameter
  dmaengine: dmatest: Use fixed point div to calculate iops
  dmaengine: dmatest: Add support for multi channel testing
  dmaengine: rcar-dmac: Document R8A774C0 bindings
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
  dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
  dmaengine: sprd: Add me as one of the module authors
  dmaengine: sprd: Support DMA 2-stage transfer mode
  dmaengine: sprd: Support DMA link-list cyclic callback
  dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
  dmaengine: sprd: Fix the last link-list configuration
  dmaengine: sprd: Get transfer residue depending on the transfer direction
  dmaengine: sprd: Remove direction usage from struct dma_slave_config
  dmaengine: dmatest: fix a small memory leak in dmatest_func()
  ...

dmaengine: sprd: Support DMA 2-stage transfer mode

2018-12-05T08:57:12+00:00

The Spreadtrum DMA controller supports channel 2-stage tansfer mode,
that means we can request 2 dma channels, one for source channel, and
another one for destination channel. Once the source channel's transaction
is done, it will trigger the destination channel's transaction automatically
by hardware signal.

Signed-off-by: Eric Long 
Signed-off-by: Baolin Wang 
Signed-off-by: Vinod Koul

dmaengine: pxa: make the filter function internal

2018-12-03T21:41:07+00:00

As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.

Signed-off-by: Robert Jarzmik 
Acked-by: Vinod Koul

dmaengine: sprd: Support DMA link-list mode

2018-09-03T11:28:50+00:00

The Spreadtrum DMA can support the link-list transaction mode, which means
DMA controller can do transaction one by one automatically once we linked
these transaction by link-list register.

Signed-off-by: Eric Long 
Signed-off-by: Baolin Wang 
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2018-08-18T22:55:59+00:00

Pull DMAengine updates from Vinod Koul:
 "This round brings couple of framework changes, a new driver and usual
  driver updates:

   - new managed helper for dmaengine framework registration

   - split dmaengine pause capability to pause and resume and allow
     drivers to report that individually

   - update dma_request_chan_by_mask() to handle deferred probing

   - move imx-sdma to use virt-dma

   - new driver for Actions Semi Owl family S900 controller

   - minor updates to intel, renesas, mv_xor, pl330 etc"

* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Add Actions Semi Owl family S900 DMA driver
  dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
  dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
  dmaengine: mic_x100_dma: use the new helper to simplify the code
  dmaengine: add a new helper dmaenginem_async_device_register
  dmaengine: imx-sdma: add memcpy interface
  dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
  dmaengine: dma_request_chan_by_mask() to handle deferred probing
  dmaengine: pl330: fix irq race with terminate_all
  dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
  dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
  dmaengine: mv_xor_v2: enable COMPILE_TEST
  dmaengine: mv_xor_v2: move unmap to before callback
  dmaengine: mv_xor_v2: convert callback to helper function
  dmaengine: mv_xor_v2: kill the tasklets upon exit
  dmaengine: mv_xor_v2: explicitly freeup irq
  dmaengine: sh: rcar-dmac: Add dma_pause operation
  dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
  dmaengine: idma64: Support dmaengine_terminate_sync()
  dmaengine: hsu: Support dmaengine_terminate_sync()
  ...

dmaengine: xilinx_dma: Enable VDMA S2MM vertical flip support

2018-06-29T08:50:00+00:00

Vertical flip state is exported in xilinx_vdma_config and depending
on IP configuration(c_enable_vert_flip) vertical flip state is
programmed in hardware.

Signed-off-by: Radhey Shyam Pandey 
Signed-off-by: Michal Simek 
Acked-by: Kedareswara rao Appana 
Signed-off-by: Vinod Koul

dmaengine: pxa: document pxad_param

2018-06-18T19:32:15+00:00

Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.

Signed-off-by: Robert Jarzmik 
Acked-by: Vinod Koul

dmaengine: sprd: Add Spreadtrum DMA configuration

2018-05-29T04:45:33+00:00

This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces
for users to configure DMA, as well as adding one 'struct sprd_dma_config'
structure to save Spreadtrum DMA configuration for each DMA channel.

Signed-off-by: Eric Long 
Signed-off-by: Baolin Wang 
Signed-off-by: Vinod Koul

dmaengine: sprd: Move DMA request mode and interrupt type into head file

2018-04-27T06:24:55+00:00

This patch will move the Spreadtrum DMA request mode and interrupt type
into one head file for user to configure.

Signed-off-by: Eric Long 
Signed-off-by: Baolin Wang 
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2017-11-15T00:49:31+00:00

Pull dmaengine updates from Vinod Koul:
 "Updates for this cycle include:

   - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX
     controllers

   - PM support for IMG MDC drivers

   - updates to bcm-sba-raid driver and improvements to sun6i driver

   - subsystem conversion for:
      - timers to use timer_setup()
      - remove usage of PCI pool API
      - usage of %p format specifier

   - minor updates to bunch of drivers"

* tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits)
  dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
  dmaengine: dmatest: warn user when dma test times out
  dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"
  dmaengine: stm32_mdma: activate pack/unpack feature
  dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad
  dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad
  MAINTAINERS: Step down from a co-maintaner of DW DMAC driver
  dmaengine: pch_dma: Replace PCI pool old API
  dmaengine: Convert timers to use timer_setup()
  dmaengine: sprd: Add Spreadtrum DMA driver
  dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller
  dmaengine: sun6i: Retrieve channel count/max request from devicetree
  dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
  dmaengine: bcm-sba-raid: Use common GPL comment header
  dmaengine: bcm-sba-raid: Use only single mailbox channel
  dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock
  dmaengine: pl330: fix descriptor allocation fail
  dmaengine: rcar-dmac: use TCRB instead of TCR for residue
  dmaengine: sun6i: Add support for Allwinner A64 and compatibles
  arm64: allwinner: a64: Add devicetree binding for DMA controller
  ...