The i.MX95 System manager exports SCMI CPU protocol for linux to manage
cpu cores. The driver is to use the cpu Protocol interface to
start, stop a cpu cores (eg, M7).

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

These two functions have a stub definition when CONFIG_IMX_SCMI_MISC_EXT
is not set, which conflict with the global definition:

In file included from drivers/firmware/imx/sm-misc.c:6:
include/linux/firmware/imx/sm.h:30:1: error: expected identifier or '(' before '{' token
   30 | {
      | ^
drivers/firmware/imx/sm-misc.c:26:5: error: redefinition of 'scmi_imx_misc_ctrl_get'
   26 | int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val)
      |     ^~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/imx/sm.h:24:19: note: previous definition of 'scmi_imx_misc_ctrl_get' with type 'int(u32,  u32 *, u32 *)' {aka 'int(unsigned int,  unsigned int *, unsigned int *)'}
   24 | static inline int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val)
      |                   ^~~~~~~~~~~~~~~~~~~~~~

There is no real need for the #ifdef, and removing this avoids
the build failure.

Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Link: https://lore.kernel.org/r/20240909203023.1275232-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The i.MX95 System manager exports SCMI MISC protocol for linux to do
various settings, such as set board gpio expander as wakeup source.

The driver is to add the support.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per checkpatch.pl, "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP"
So use EOPNOTSUPP to replace ENOTSUPP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx_dsp_get_data() can return NULL, but the value is not checked
before being usd, leading to static analysis warnings.

sound/soc/sof/imx/imx8.c:85:32: error: dereference of NULL ‘0’
[CWE-476] [-Werror=analyzer-null-dereference]

   85 |         spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
      |                            ~~~~^~~~~~

It appears this is not really a possible problem, so remove those checks.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add resource owner management API, this API could be used to check
whether M4 is under control of Linux.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Like i.MX8 SCU, i.MX8ULP S4 also has vendor specific protocol.
 - bind SCU/S4 MU part to share one tx/rx/init API to make code simple.
 - S4 msg max size is very large, so alloc the space at driver probe,
   not use local on stack variable.
 - S4 MU has 8 TR and 4 RR which is different with i.MX8 MU, so adapt
   code to reflect this.

   Tested on i.MX8MP, i.MX8ULP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>