linux-toradex.git/include/linux/fs.h, branch v2.6.35.3

bio, fs: update RWA_MASK, READA and SWRITE to match the corresponding BIO_RW_* bits

2010-08-13T20:30:53+00:00

commit aca27ba9618276dd2f777bcd5a1419589ccf1ca8 upstream.

Commit a82afdf (block: use the same failfast bits for bio and request)
moved BIO_RW_* bits around such that they match up with REQ_* bits.
Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA
and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_*
bits.  READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4
instead of bit 1, breaking RWA_MASK, READA and SWRITE.

This patch updates RWA_MASK, READA and SWRITE such that they match the
BIO_RW_* bits again.  A follow up patch will update the definitions to
directly use BIO_RW_* bits so that this kind of breakage won't happen
again.

Neil also spotted missing RWA_MASK conversion.

Stable: The offending commit a82afdf was released with v2.6.32, so
this patch should be applied to all kernels since then but it must
_NOT_ be applied to kernels earlier than that.

Signed-off-by: Tejun Heo 
Reported-and-bisected-by: Vladislav Bolkhovitin 
Root-caused-by: Neil Brown 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

Fix sget() race with failing mount

2010-08-13T20:30:50+00:00

commit 7a4dec53897ecd3367efb1e12fe8a4edc47dc0e9 upstream.

If sget() finds a matching superblock being set up, it'll
grab an active reference to it and grab s_umount.  That's
fine - we'll wait for completion of foofs_get_sb() that way.
However, if said foofs_get_sb() fails we'll end up holding
the halfway-created superblock.  deactivate_locked_super()
called by foofs_get_sb() will just unlock the sucker since
we are holding another active reference to it.

What we need is a way to tell if superblock has been successfully
set up.  Unfortunately, neither ->s_root nor the check for
MS_ACTIVE quite fit.  Cheap and easy way, suitable for backport:
new flag set by the (only) caller of ->get_sb().  If that flag
isn't present by the time sget() grabbed s_umount on preexisting
superblock it has found, it's seeing a stillborn and should
just bury it with deactivate_locked_super() (and repeat the search).

Longer term we want to set that flag in ->get_sb() instances (and
check for it to distinguish between "sget() found us a live sb"
and "sget() has allocated an sb, we need to set it up" in there,
instead of checking ->s_root as we do now).

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

VFS: introduce s_dirty accessors

2010-07-07T00:32:07+00:00

This patch introduces 3 VFS accessors: 'sb_mark_dirty()',
'sb_mark_clean()', and 'sb_is_dirty()'. They simply
set 'sb->s_dirt' or test 'sb->s_dirt'. The plan is to make
every FS use these accessors later instead of manipulating
the 'sb->s_dirt' flag directly.

Ultimately, this change is a preparation for the periodic
superblock synchronization optimization which is about
preventing the "sync_supers" kernel thread from waking up
even if there is nothing to synchronize.

This patch does not do any functional change, just adds
accessor functions.

Signed-off-by: Artem Bityutskiy 
Signed-off-by: Linus Torvalds

wrong type for 'magic' argument in simple_fill_super()

2010-06-04T21:16:28+00:00

It's used to superblock ->s_magic, which is unsigned long.

Signed-off-by: Roberto Sassu 
Reviewed-by: Mimi Zohar 
Signed-off-by: Eric Paris 
CC: stable@kernel.org
Signed-off-by: Al Viro

fs: introduce new truncate sequence

2010-05-28T02:15:33+00:00

Introduce a new truncate calling sequence into fs/mm subsystems. Rather than
setattr > vmtruncate > truncate, have filesystems call their truncate sequence
from ->setattr if filesystem specific operations are required. vmtruncate is
deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced
previously should be used.

simple_setattr is introduced for simple in-ram filesystems to implement
the new truncate sequence. Eventually all filesystems should be converted
to implement a setattr, and the default code in notify_change should go
away.

simple_setsize is also introduced to perform just the ATTR_SIZE portion
of simple_setattr (ie. changing i_size and trimming pagecache).

To implement the new truncate sequence:
- filesystem specific manipulations (eg freeing blocks) must be done in
  the setattr method rather than ->truncate.
- vmtruncate can not be used by core code to trim blocks past i_size in
  the event of write failure after allocation, so this must be performed
  in the fs code.
- convert usage of helpers block_write_begin, nobh_write_begin,
  cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed
  variants. These avoid calling vmtruncate to trim blocks (see previous).
- inode_setattr should not be used. generic_setattr is a new function
  to be used to copy simple attributes into the generic inode.
- make use of the better opportunity to handle errors with the new sequence.

Big problem with the previous calling sequence: the filesystem is not called
until i_size has already changed.  This means it is not allowed to fail the
call, and also it does not know what the previous i_size was. Also, generic
code calling vmtruncate to truncate allocated blocks in case of error had
no good way to return a meaningful error (or, for example, atomically handle
block deallocation).

Cc: Christoph Hellwig 
Acked-by: Jan Kara 
Signed-off-by: Nick Piggin 
Signed-off-by: Al Viro

rename the generic fsync implementations

2010-05-28T02:06:06+00:00

We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Al Viro

drop unused dentry argument to ->fsync

2010-05-28T02:05:02+00:00

Signed-off-by: Christoph Hellwig 
Signed-off-by: Al Viro

get rid of the magic around f_count in aio

2010-05-28T02:03:07+00:00

__aio_put_req() plays sick games with file refcount.  What
it wants is fput() from atomic context; it's almost always
done with f_count > 1, so they only have to deal with delayed
work in rare cases when their reference happens to be the
last one.  Current code decrements f_count and if it hasn't
hit 0, everything is fine.  Otherwise it keeps a pointer
to struct file (with zero f_count!) around and has delayed
work do __fput() on it.

Better way to do it: use atomic_long_add_unless( , -1, 1)
instead of !atomic_long_dec_and_test().  IOW, decrement it
only if it's not the last reference, leave refcount alone
if it was.  And use normal fput() in delayed work.

I've made that atomic_long_add_unless call a new helper -
fput_atomic().  Drops a reference to file if it's safe to
do in atomic (i.e. if that's not the last one), tells if
it had been able to do that.  aio.c converted to it, __fput()
use is gone.  req->ki_file *always* contributes to refcount
now.  And __fput() became static.

Signed-off-by: Al Viro

Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable

2010-05-27T17:43:44+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
  Btrfs: add more error checking to btrfs_dirty_inode
  Btrfs: allow unaligned DIO
  Btrfs: drop verbose enospc printk
  Btrfs: Fix block generation verification race
  Btrfs: fix preallocation and nodatacow checks in O_DIRECT
  Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
  Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
  Btrfs: rework O_DIRECT enospc handling
  Btrfs: use async helpers for DIO write checksumming
  Btrfs: don't walk around with task->state != TASK_RUNNING
  Btrfs: do aio_write instead of write
  Btrfs: add basic DIO read/write support
  direct-io: do not merge logically non-contiguous requests
  direct-io: add a hook for the fs to provide its own submit_bio function
  fs: allow short direct-io reads to be completed via buffered IO
  Btrfs: Metadata ENOSPC handling for balance
  Btrfs: Pre-allocate space for data relocation
  Btrfs: Metadata ENOSPC handling for tree log
  Btrfs: Metadata reservation for orphan inodes
  Btrfs: Introduce global metadata reservation
  ...

vfs: introduce noop_llseek()

2010-05-27T16:12:56+00:00

This is an implementation of ->llseek useable for the rare special case
when userspace expects the seek to succeed but the (device) file is
actually not able to perform the seek.  In this case you use noop_llseek()
instead of falling back to the default implementation of ->llseek.

Signed-off-by: Jan Blunck 
Cc: Frederic Weisbecker 
Cc: Christoph Hellwig 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds