linux-toradex.git/include/linux/fsl_devices.h, branch v4.19-rc5 Linux kernel for Apalis and Colibri modules fsl/usb: Workarourd for USB erratum-A005697 2016-12-05T14:13:58+00:00 Changming Huang jerry.huang@nxp.com 2016-11-29T05:45:38+00:00 9d4b82706357f2eb23f45309227fc94d11eea255 The EHCI specification states the following in the SUSP bit description: In the Suspend state, the port is sensitive to resume detection. Note that the bit status does not change until the port is suspended and that there may be a delay in suspending a port if there is a transaction currently in progress on the USB. However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately when the application sets it and not when the port is actually suspended. So the application must wait for at least 10 milliseconds after a port indicates that it is suspended, to make sure this port has entered suspended state before initiating this port resume using the Force Port Resume bit. This bit is for NXP controller, not EHCI compatible. Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The EHCI specification states the following in the SUSP bit description:
In the Suspend state, the port is sensitive to resume detection.
Note that the bit status does not change until the port is suspended and
that there may be a delay in suspending a port if there is a transaction
currently in progress on the USB.

However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately
when the application sets it and not when the port is actually suspended.

So the application must wait for at least 10 milliseconds after a port
indicates that it is suspended, to make sure this port has entered
suspended state before initiating this port resume using the Force Port
Resume bit. This bit is for NXP controller, not EHCI compatible.

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: usb: fsl: Workaround for USB erratum-A005275 2015-08-14T23:50:36+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-08-06T09:21:27+00:00 f8786a91548df6930643a052e40e5c0b7a8403a5 Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Incoming packets in high speed are randomly corrupted by h/w
resulting in multiple errors. This workaround makes FS as
default mode in all affected socs by disabling HS chirp
signalling.This errata does not affect FS and LS mode.

Forces all HS devices to connect in FS mode for all socs
affected by this erratum:
P3041 and P2041 rev 1.0 and 1.1
P5020 and P5010 rev 1.0 and 2.0
P5040, P1010 and T4240 rev 1.0

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: usb: fsl: Modify phy clk valid bit checking 2015-07-22T23:44:34+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-07-14T11:58:10+00:00 f4fdfaa280a284be8a056d6840cdbbf42c05bf95 Phy_clk_valid bit is checked only when the boolean property phy-clk-valid in present in usb node device tree. This property is added to the usb node via device tree fixup. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Phy_clk_valid bit is checked only when the boolean
property phy-clk-valid in present in usb node device tree.
This property is added to the usb node via device tree fixup.

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers:usb:fsl: Introduce FSL_USB2_PHY_UTMI_DUAL macro 2015-07-22T23:37:32+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-06-15T10:18:22+00:00 6009d95e04cf74c6f80db56fddca21fea476ad24 Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode in SOCs such has T4240, T1040, T2080 which have utmi dual-phy Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode
in SOCs such has T4240, T1040, T2080 which have utmi dual-phy

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: usb :fsl: Implement Workaround for USB Erratum A007792 2015-07-22T23:37:32+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-06-15T10:17:29+00:00 523f1dec58408b36e7683a3d61a0286eed1fc1c8 USB controller version-2.5 requires to enable internal UTMI phy and program PTS field in PORTSC register before asserting controller reset. This is must for successful resetting of the controller and subsequent enumeration of usb devices Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
USB controller version-2.5 requires to enable internal UTMI
phy and program PTS field in PORTSC register before asserting
controller reset. This is must for successful resetting of the
controller and subsequent enumeration of usb devices

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers:usb:fsl: Replace macros with enumerated type 2015-07-22T23:37:32+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-06-15T10:16:37+00:00 38aa420096e565fe9c98f9d9475fd168114501a9 Replace macros with enumerated type to represent usb ip controller version Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Replace macros with enumerated type to represent usb ip
controller version

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers:usb:fsl: Add support for USB controller version-2.5 2015-05-31T06:51:24+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-05-26T11:45:29+00:00 138c3f03b017e261316a4f1ec793e1ff74516def Add support for USB controller version-2.5 used in T4240 rev2.0, T1024, T1040, T2080, LS1021A Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for USB controller version-2.5 used in
T4240 rev2.0, T1024, T1040, T2080, LS1021A

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY 2012-09-24T20:42:45+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2012-09-24T14:01:35+00:00 5ed338778f917a035f0f0a52327fc4f72e36f7a1 PHY_CLK_VALID bit doesn't work properly with UTMI PHY. e.g. This bit is always zero on P5040, etc. There is no need to check this bit for UTMI PHY, just keep checking for ULPI PHY to prevent system hanging. This patch should be squashed into previous commit 3735ba8db8e6e "powerpc/usb: fix bug of CPU hang when missing USB PHY clock" Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
PHY_CLK_VALID bit doesn't work properly with UTMI PHY.
e.g. This bit is always zero on P5040, etc.
There is no need to check this bit for UTMI PHY, just keep
checking for ULPI PHY to prevent system hanging.

This patch should be squashed into previous commit 3735ba8db8e6e
"powerpc/usb: fix bug of CPU hang when missing USB PHY clock"

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl/usb: Add support for USB controller version 2.4 2012-09-21T16:43:55+00:00 Ramneek Mehresh ramneek.mehresh@freescale.com 2012-09-19T08:48:45+00:00 e98b6a4f9667e41eb96104991794eb29212ec2b7 Add support for USB controller version 2.4 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for USB controller version 2.4

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/usb: fix bug of CPU hang when missing USB PHY clock 2012-09-05T23:52:08+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2012-08-22T10:17:00+00:00 3735ba8db8e6ea22ad3ff524328926d8d780a884 when missing USB PHY clock, kernel booting up will hang during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
when missing USB PHY clock, kernel booting up will hang during USB
initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid
CPU hanging in this case.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>