linux-toradex.git/include/linux/ftrace.h, branch v3.3.5

tracing: Fix compile error when static ftrace is enabled

2012-01-07T22:26:49+00:00

The stack tracer uses the call ftrace_set_early_filter() function
to allow the stack tracer to pick its own functions on boot.
But this function is not defined if dynamic ftrace is not set.
This causes a compiler error when stack tracer is enabled and
dynamic ftrace is not.

Reported-by: Ingo Molnar 
Signed-off-by: Steven Rostedt

ftrace: Allow access to the boot time function enabling

2011-12-21T12:26:35+00:00

Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.

Signed-off-by: Steven Rostedt

ftrace: Decouple hash items from showing filtered functions

2011-12-21T12:25:24+00:00

The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).

As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.

Signed-off-by: Steven Rostedt

ftrace: Allow other users of function tracing to use the output listing

2011-12-21T12:25:06+00:00

The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.

Signed-off-by: Steven Rostedt

ftrace: Replace record newlist with record page list

2011-12-21T12:19:03+00:00

As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.

At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.

Signed-off-by: Steven Rostedt

ftrace: Remove usage of "freed" records

2011-12-21T12:17:57+00:00

Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.

Another benefit of doing this is that we can also move the
records around; sort them.

Signed-off-by: Steven Rostedt

ftrace: Allow archs to modify code without stop machine

2011-12-21T12:16:58+00:00

The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.

Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.

If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.

Signed-off-by: Steven Rostedt

include: replace linux/module.h with "struct module" wherever possible

2011-10-31T23:32:32+00:00

The  pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used 
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.

Signed-off-by: Paul Gortmaker

ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not defined

2011-07-11T14:12:59+00:00

The struct ftrace_hash was declared within CONFIG_FUNCTION_TRACER
but was referenced outside of it.

Reported-by: Ingo Molnar 
Signed-off-by: Steven Rostedt

ftrace: Fix regression of :mod:module function enabling

2011-07-07T15:30:08+00:00

The new code that allows different utilities to pick and choose
what functions they trace broke the :mod: hook that allows users
to trace only functions of a particular module.

The reason is that the :mod: hook bypasses the hash that is setup
to allow individual users to trace their own functions and uses
the global hash directly. But if the global hash has not been
set up, it will cause a bug:

echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter

produces:

 [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
 [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip
 BUG: unable to handle kernel paging request at ffffffff8160ec90
 IP: [] add_hash_entry+0x66/0xd0
 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1
 Oops: 0003 [#1] SMP Jul  7 04:02:28 phyllis kernel: [55303.858604] CPU 1
 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt

 Pid: 10344, comm: bash Tainted: G        WC  3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ
 RIP: 0010:[]  [] add_hash_entry+0x66/0xd0
 RSP: 0018:ffff88003a96bda8  EFLAGS: 00010246
 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940
 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78
 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000
 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470)
 Stack:
  0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5
  ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80
  ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00
 Call Trace:
  [] match_records+0x155/0x1b0
  [] ftrace_mod_callback+0xbc/0x100
  [] ftrace_regex_write+0x16f/0x210
  [] ftrace_filter_write+0xf/0x20
  [] vfs_write+0xc8/0x190
  [] sys_write+0x51/0x90
  [] system_call_fastpath+0x16/0x1b
 Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2
 RIP [] add_hash_entry+0x66/0xd0
  RSP 
 CR2: ffffffff8160ec90
 ---[ end trace a5d031828efdd88e ]---

Reported-by: Brian Marete 
Signed-off-by: Steven Rostedt