linux-toradex.git/include/linux/ftrace.h, branch v3.5-rc3

ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()

2012-05-17T00:00:27+00:00

To remove duplicate code, have the ftrace arch_ftrace_update_code()
use the generic ftrace_modify_all_code(). This requires that the
default ftrace_replace_code() becomes a weak function so that an
arch may override it.

Signed-off-by: Steven Rostedt

ftrace: Make ftrace_modify_all_code() global for archs to use

2012-05-17T00:00:26+00:00

Rename __ftrace_modify_code() to ftrace_modify_all_code() and make
it global for all archs to use. This will remove the duplication
of code, as archs that can modify code without stop_machine()
can use it directly outside of the stop_machine() call.

Signed-off-by: Steven Rostedt

ftrace: Return record ip addr for ftrace_location()

2012-05-16T23:58:49+00:00

ftrace_location() is passed an addr, and returns 1 if the addr is
on a ftrace nop (or caller to ftrace_caller), and 0 otherwise.

To let kprobes know if it should move a breakpoint or not, it
must return the actual addr that is the start of the ftrace nop.
This way a kprobe placed on the location of a ftrace nop, can
instead be placed on the instruction after the nop. Even if the
probe addr is on the second or later byte of the nop, it can
simply be moved forward.

Cc: Masami Hiramatsu 
Signed-off-by: Steven Rostedt

tracing: Prevent wasting time evaluating parameters in trace_preempt_on/off

2012-05-08T13:33:52+00:00

This fixes spending time for evaluating parameters in trace_preempt_on/off when
the tracer config is off.

The patch mainly inspired by Steven Rostedt, thanks Steven.

Link: http://lkml.kernel.org/r/4FA73510.7070705@samsung.com

Cc: Ingo Molnar 
Cc: Frederic Weisbecker 
Cc: Peter Zijlstra 
Cc: Paul Turner 
Cc: Thomas Gleixner 
Cc: Hidetoshi Seto 
Cc: Paul E. McKenney 
Cc: Josh Triplett 
Signed-off-by: Minho Ban 
Signed-off-by: Steven Rostedt

ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine

2012-04-28T01:10:44+00:00

This method changes x86 to add a breakpoint to the mcount locations
instead of calling stop machine.

Now that iret can be handled by NMIs, we perform the following to
update code:

1) Add a breakpoint to all locations that will be modified

2) Sync all cores

3) Update all locations to be either a nop or call (except breakpoint
   op)

4) Sync all cores

5) Remove the breakpoint with the new code.

6) Sync all cores

[
  Added updates that Masami suggested:
   Use unlikely(modifying_ftrace_code) in int3 trap to keep kprobes efficient.
   Don't use NOTIFY_* in ftrace handler in int3 as it is not a notifier.
]

Cc: H. Peter Anvin 
Acked-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt

ftrace, perf: Add filter support for function trace event

2012-02-21T16:08:30+00:00

Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:

  perf record -e ftrace:function --filter="(ip == mm_*)" ls

The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:

  ip == f1[, ]f2 ... || ip != f3[, ]f4 ...

with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:

  perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
  perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
  perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls

The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.

The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.

The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.

The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.

Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com

Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt

ftrace: Add enable/disable ftrace_ops control interface

2012-02-21T16:08:23+00:00

Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.

Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.

When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.

The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.

Adding 3 inline functions:
  ftrace_function_local_disable/ftrace_function_local_enable
  - enable/disable the ftrace_ops on current cpu
  ftrace_function_local_disabled
  - get disabled ftrace_ops::disabled value for current cpu

Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker 
Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt

ftrace: Change filter/notrace set functions to return exit code

2012-02-03T14:48:18+00:00

Currently the ftrace_set_filter and ftrace_set_notrace functions
do not return any return code. So there's no way for ftrace_ops
user to tell wether the filter was correctly applied.

The set_ftrace_filter interface returns error in case the filter
did not match:

  # echo krava > set_ftrace_filter
  bash: echo: write error: Invalid argument

Changing both ftrace_set_filter and ftrace_set_notrace functions
to return zero if the filter was applied correctly or -E* values
in case of error.

Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker 
Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt

tracing: Fix compile error when static ftrace is enabled

2012-01-07T22:26:49+00:00

The stack tracer uses the call ftrace_set_early_filter() function
to allow the stack tracer to pick its own functions on boot.
But this function is not defined if dynamic ftrace is not set.
This causes a compiler error when stack tracer is enabled and
dynamic ftrace is not.

Reported-by: Ingo Molnar 
Signed-off-by: Steven Rostedt

ftrace: Allow access to the boot time function enabling

2011-12-21T12:26:35+00:00

Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.

Signed-off-by: Steven Rostedt