linux-toradex.git/include/linux/host1x.h, branch v6.0-rc1 Linux kernel for Apalis and Colibri modules gpu: host1x: Program context stream ID on submission 2022-07-08T14:27:52+00:00 Mikko Perttunen mperttunen@nvidia.com 2022-06-27T14:19:49+00:00 2486254781eab6f6119fabea78f11386c54460d2 Add code to do stream ID switching at the beginning of a job. The stream ID is switched to the stream ID specified by the context passed in the job structure. Before switching the stream ID, an OP_DONE wait is done on the channel's engine to ensure that there is no residual ongoing work that might do DMA using the new stream ID. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add code to do stream ID switching at the beginning of a job. The
stream ID is switched to the stream ID specified by the context
passed in the job structure.

Before switching the stream ID, an OP_DONE wait is done on the
channel's engine to ensure that there is no residual ongoing
work that might do DMA using the new stream ID.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Add context device management code 2022-07-08T14:27:52+00:00 Mikko Perttunen mperttunen@nvidia.com 2022-06-27T14:19:48+00:00 8aa5bcb61612060429223d1fbb7a1c30a579fc1f Add code to register context devices from device tree, allocate them out and manage their refcounts. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add code to register context devices from device tree, allocate them
out and manage their refcounts.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Do not use mapping cache for job submissions 2022-04-06T13:12:36+00:00 Thierry Reding treding@nvidia.com 2022-03-24T10:30:25+00:00 3e9c4584336149146fe15cb5703fc10a2ca2d2a0 Buffer mappings used in job submissions are usually small and not rapidly reused as opposed to framebuffers (which are usually large and rapidly reused, for example when page-flipping between double-buffered framebuffers). Avoid going through the mapping cache for these buffers since the cache would also lead to leaks if nobody is ever releasing the cache's last reference. For DRM/KMS these last references are dropped when the framebuffers are removed and therefore no longer needed. While at it, also add a note about the need to explicitly remove the final reference to the mapping in the cache. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Buffer mappings used in job submissions are usually small and not
rapidly reused as opposed to framebuffers (which are usually large and
rapidly reused, for example when page-flipping between double-buffered
framebuffers). Avoid going through the mapping cache for these buffers
since the cache would also lead to leaks if nobody is ever releasing
the cache's last reference. For DRM/KMS these last references are
dropped when the framebuffers are removed and therefore no longer
needed.

While at it, also add a note about the need to explicitly remove the
final reference to the mapping in the cache.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Fix a kernel-doc warning 2022-04-06T13:08:17+00:00 Randy Dunlap rdunlap@infradead.org 2022-04-03T22:53:54+00:00 fe696ccb277d332dc4e625b5b20b988b04d16c04 Add @cache description to eliminate a kernel-doc warning. include/linux/host1x.h:104: warning: Function parameter or member 'cache' not described in 'host1x_client' Fixes: 1f39b1dfa53c ("drm/tegra: Implement buffer object cache") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thierry Reding <treding@nvidia.com> Cc: linux-tegra@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add @cache description to eliminate a kernel-doc warning.

include/linux/host1x.h:104: warning: Function parameter or member 'cache' not described in 'host1x_client'

Fixes: 1f39b1dfa53c ("drm/tegra: Implement buffer object cache")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Add host1x_channel_stop() 2021-12-16T13:07:07+00:00 Dmitry Osipenko digetx@gmail.com 2021-11-30T23:23:16+00:00 9ca790f44606109071ab1a3a37ed99e91794c37c Add host1x_channel_stop() which waits till channel becomes idle and then stops the channel hardware. This is needed for supporting suspend/resume by host1x drivers since the hardware state is lost after power-gating, thus the channel needs to be stopped before client enters into suspend. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add host1x_channel_stop() which waits till channel becomes idle and then
stops the channel hardware. This is needed for supporting suspend/resume
by host1x drivers since the hardware state is lost after power-gating,
thus the channel needs to be stopped before client enters into suspend.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/tegra: Add NVDEC driver 2021-12-16T13:07:06+00:00 Mikko Perttunen mperttunen@nvidia.com 2021-09-16T14:55:17+00:00 46f226c93d35b936aeec6eb31da932dc2e86f413 Add support for booting and using NVDEC on Tegra210, Tegra186 and Tegra194 to the Host1x and TegraDRM drivers. Booting in secure mode is not currently supported. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add support for booting and using NVDEC on Tegra210, Tegra186
and Tegra194 to the Host1x and TegraDRM drivers. Booting in
secure mode is not currently supported.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/tegra: Implement buffer object cache 2021-12-16T13:07:06+00:00 Thierry Reding treding@nvidia.com 2020-02-07T15:50:52+00:00 1f39b1dfa53c84b56d7ad37fed44afda7004959d This cache is used to avoid mapping and unmapping buffer objects unnecessarily. Mappings are cached per client and stay hot until the buffer object is destroyed. Signed-off-by: Thierry Reding <treding@nvidia.com> 
This cache is used to avoid mapping and unmapping buffer objects
unnecessarily. Mappings are cached per client and stay hot until
the buffer object is destroyed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/tegra: Implement correct DMA-BUF semantics 2021-12-16T13:07:06+00:00 Thierry Reding treding@nvidia.com 2021-09-09T13:51:24+00:00 c6aeaf56f468a565f6d2f27325fc07d35cdcd3cb DMA-BUF requires that each device that accesses a DMA-BUF attaches to it separately. To do so the host1x_bo_pin() and host1x_bo_unpin() functions need to be reimplemented so that they can return a mapping, which either represents an attachment or a map of the driver's own GEM object. Signed-off-by: Thierry Reding <treding@nvidia.com> 
DMA-BUF requires that each device that accesses a DMA-BUF attaches to it
separately. To do so the host1x_bo_pin() and host1x_bo_unpin() functions
need to be reimplemented so that they can return a mapping, which either
represents an attachment or a map of the driver's own GEM object.

Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Add option to skip firewall for a job 2021-08-10T12:42:49+00:00 Mikko Perttunen mperttunen@nvidia.com 2021-06-10T11:04:46+00:00 0fddaa85d66140466df8e848afcda452b7d7b416 The new UAPI will have its own firewall, and we don't want to run the firewall in the Host1x driver for those jobs. As such, add a parameter to host1x_job_alloc to specify if we want to skip the firewall in the Host1x driver. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The new UAPI will have its own firewall, and we don't want to run
the firewall in the Host1x driver for those jobs. As such, add a
parameter to host1x_job_alloc to specify if we want to skip the
firewall in the Host1x driver.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpu: host1x: Add support for syncpoint waits in CDMA pushbuffer 2021-08-10T12:41:19+00:00 Mikko Perttunen mperttunen@nvidia.com 2021-06-10T11:04:45+00:00 e902585fc8b639f1a1258eaa6265e98994e34ef8 Add support for inserting syncpoint waits in the CDMA pushbuffer. These waits need to be done in HOST1X class, while gather submitted by the application execute in engine class. Support is added by converting the gather list of job into a command list that can include both gathers and waits. When the job is submitted, these commands are pushed as the appropriate opcodes on the CDMA pushbuffer. Also supported are waits relative to the start of the job, which are useful for jobs doing multiple things with an engine that doesn't natively support pipelining. While at it, use 32-bit waits on chips that support them. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add support for inserting syncpoint waits in the CDMA pushbuffer.
These waits need to be done in HOST1X class, while gather submitted
by the application execute in engine class.

Support is added by converting the gather list of job into a command
list that can include both gathers and waits. When the job is
submitted, these commands are pushed as the appropriate opcodes
on the CDMA pushbuffer.

Also supported are waits relative to the start of the job,
which are useful for jobs doing multiple things with an engine
that doesn't natively support pipelining.

While at it, use 32-bit waits on chips that support them.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>