* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
Provide a static debounce configuration mechanism for twl4030 GPIOs, replacing the previous dynamic one. The single user of that mechanism was for MMC card detect debouncing. Boards can provide a bitmask saying which GPIOs to debounce (30 msec). It's always enabled for pins with the MMC card-detect/VMMCx link active, so most boards won't need to set the debounce mask. This is a net code shrink, including runtime footprint. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Basic MFD framework for the MSP430 microcontroller firmware used
on the dm355evm board:
- Provides an interface for other drivers: register read/write
utilities, and register declarations.
- Directly exports:
* Many signals through the GPIO framework
+ LEDs
+ SW6 through gpio sysfs
+ NTSC/nPAL jumper through gpio sysfs
+ ... more could be added later, e.g. MMC signals
* Child devices:
+ LEDs, via leds-gpio child (and default triggers)
+ RTC, via rtc-dm355evm child device
+ Buttons and IR control, via dm355evm_keys
- Supports power-off system call. Use the reset button to power
the board back up; the power supply LED will be on, but the
MSP430 waits to re-activate the regulators.
- On probe() this:
* Announces firmware revision
* Turns off the banked LEDs
* Exports the resources noted above
* Hooks the power-off support
* Muxes tvp5146 -or- imager for video input
Unless the new tvp514x driver (tracked for mainline) is configured,
this assumes that some custom imager driver handles video-in.
This completely ignores the registers reporting the output voltages
on the various power supplies. Someone could add a hwmon interface
if that seems useful.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
This contains two bugfixes to the initial twl4030 regulator
support patch related to USB:
(a) always overwrite the old list of consumers ... else
the regulator handles all use the same "usb1v5" name;
(b) don't set up the "usbcp" regulator, which turns out
to be managed through separate controls, usually ULPI
directly from the OTG controller.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Initial code to create twl4030 voltage regulator devices, using
the new regulator framework. Note that this now starts to care
what name is used to declare the TWL chip:
- TWL4030 is the "old" chip; newer ones have a bigger variety
of VAUX2 voltages.
- TWL5030 is the core "new" chip; TPS65950 is its catalog version.
- The TPS65930 and TPS65920 are cost-reduced catalog versions of
TWL5030 parts ... fewer regulators, no battery charger, etc.
Board-specific regulator configuration should be provided, listing
which regulators are used and their constraints (e.g. 1.8V only).
Code that could ("should"?) leverage the regulator stuff includes
TWL4030 USB transceiver support and MMC glue, LCD support for the
3430SDP and Labrador boards, and S-Video output.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
- Move it into a separate file; clean and streamline it - Restructure the init code for reuse during secondary dispatch - Support both levels (primary, secondary) of IRQ dispatch - Use a workqueue for irq mask/unmask and trigger configuration Code for two subchips currently share that secondary handler code. One is the power subchip; its IRQs are now handled by this core, courtesy of this patch. The other is the GPIO module, which will be supported through a later patch. There are also minor changes to the header file, mostly related to GPIO support; nothing yet in mainline cares about those. A few references to OMAP-specific symbols are disabled; when they can all be removed, the TWL4030 support ceases being OMAP-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
This patch adds the core of the TWL4030 driver, which supports chips including the TPS65950. These chips are multi-function; see http://focus.ti.com/docs/prod/folders/print/tps65950.html Public specs are in the works. For now, the block diagram on the second page of the datasheet is fairly informative. There are some known issues with this core code. Most notably, the IRQ dispatching needs simplification (to use more of genirq), generalization (integrating support for secondary IRQ dispatch as well as primary, and removing the build dependency on OMAP), and then probably updating to leverage threaded IRQ support (expected to arrive in mainline "soon"). Once the core is in mainline, drivers for other parts of this chip can follow its lead and start swimming upstream too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>