Currently the UP/DOWN state of VLANs is synchronized to the state of the underlying device, meaning all VLANs are set down once the underlying device is set down. This causes all routes to the VLAN devices to vanish. Add a flag to specify a "loose binding" mode, in which only the operstate is transfered, but the VLAN device state is independant. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This will allow drivers to adjust their receive path dynamically based on whether GRO is being applied successfully. Currently all in-tree callers ignore the return values of these functions and do not need to be changed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Use unregister_netdevice_many() to speedup master device unregister. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We currently use a 16 bit field (vlan_tci) to store VLAN ID/PRIO on a skb. Null value is used as a special value, meaning vlan tagging not enabled. This forbids use of null vlan ID. As pointed by David, some drivers use the 3 high order bits (PRIO) As VLAN ID is 12 bits, we can use the remaining bit (CFI) as a flag, and allow null VLAN ID. In case future code really wants to use VLAN_CFI_MASK, we'll have to use a bit outside of vlan_tci. #define VLAN_PRIO_MASK 0xe000 /* Priority Code Point */ #define VLAN_PRIO_SHIFT 13 #define VLAN_CFI_MASK 0x1000 /* Canonical Format Indicator */ #define VLAN_TAG_PRESENT VLAN_CFI_MASK #define VLAN_VID_MASK 0x0fff /* VLAN Identifier */ Reported-by: Gertjan Hofman <gertjan_hofman@yahoo.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that copying a 16-byte area at ~800k times a second can be really expensive :) This patch redesigns the frags GRO interface to avoid copying that area twice. The two disciples of the frags interface have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
After moving mac addresses in __vlan_put_tag() skb->mac_header needs to be updated. Reported-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds GRO interfaces for hardware-assisted VLAN reception. With this in place we're now at parity with LRO as far as the interface is concerned. That is, you can now take any LRO driver and convert it over to GRO. As the CB memory clashes with GRO's use of CB, I've removed it entirely by storing dev in skb->dev. This is OK because VLAN gets called first thing in netif_receive_skb and skb->dev is not used in between us calling netif_rx and netif_receive_skb getting called. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to deliver hardware accelerated VLAN packets to packet sockets (commit bc1d0411) caused a warning for non-NAPI drivers. The __vlan_hwaccel_rx() function is called directly from the drivers RX function, for non-NAPI drivers that means its still in RX IRQ context: [ 27.779463] ------------[ cut here ]------------ [ 27.779509] WARNING: at kernel/softirq.c:136 local_bh_enable+0x37/0x81() ... [ 27.782520] [<c0264755>] netif_nit_deliver+0x5b/0x75 [ 27.782590] [<c02bba83>] __vlan_hwaccel_rx+0x79/0x162 [ 27.782664] [<f8851c1d>] atl1_intr+0x9a9/0xa7c [atl1] [ 27.782738] [<c0155b17>] handle_IRQ_event+0x23/0x51 [ 27.782808] [<c015692e>] handle_edge_irq+0xc2/0x102 [ 27.782878] [<c0105fd5>] do_IRQ+0x4d/0x64 Split hardware accelerated VLAN reception into two parts to fix this: - __vlan_hwaccel_rx just stores the VLAN TCI and performs the VLAN device lookup, then calls netif_receive_skb()/netif_rx() - vlan_hwaccel_do_receive(), which is invoked by netif_receive_skb() in softirq context, performs the real reception and delivery to packet sockets. Reported-and-tested-by: Ramon Casellas <ramon.casellas@cttc.es> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Use a real skb member to store the skb to avoid clashes with qdiscs,
which are allowed to use the cb area themselves. As currently only real
devices that consume the skb set the NETIF_F_HW_VLAN_TX flag, no explicit
invalidation is neccessary.
The new member fills a hole on 64 bit, the skb layout changes from:
__u32 mark; /* 172 4 */
sk_buff_data_t transport_header; /* 176 4 */
sk_buff_data_t network_header; /* 180 4 */
sk_buff_data_t mac_header; /* 184 4 */
sk_buff_data_t tail; /* 188 4 */
/* --- cacheline 3 boundary (192 bytes) --- */
sk_buff_data_t end; /* 192 4 */
/* XXX 4 bytes hole, try to pack */
to
__u32 mark; /* 172 4 */
__u16 vlan_tci; /* 176 2 */
/* XXX 2 bytes hole, try to pack */
sk_buff_data_t transport_header; /* 180 4 */
sk_buff_data_t network_header; /* 184 4 */
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
- vlan_dev_reorder_header() is only called on the receive path after calling skb_share_check(). This means we can use skb_cow() since all we need is a writable header. - vlan_dev_hard_header() includes a work-around for some apparently broken out of tree MPLS code. The hard_header functions can expect to always have a headroom of at least there own hard_header_len available, so the reallocation check is unnecessary. - __vlan_put_tag() can use skb_cow_head() to avoid the skb_unshare() copy when the header is writable. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>