linux-toradex.git/include/linux/if_vlan.h, branch v3.12.42

net: Always untag vlan-tagged traffic on input.

2014-10-17T07:43:10+00:00

[ Upstream commit 0d5501c1c828fb97d02af50aa9d2b1a5498b94e4 ]

Currently the functionality to untag traffic on input resides
as part of the vlan module and is build only when VLAN support
is enabled in the kernel.  When VLAN is disabled, the function
vlan_untag() turns into a stub and doesn't really untag the
packets.  This seems to create an interesting interaction
between VMs supporting checksum offloading and some network drivers.

There are some drivers that do not allow the user to change
tx-vlan-offload feature of the driver.  These drivers also seem
to assume that any VLAN-tagged traffic they transmit will
have the vlan information in the vlan_tci and not in the vlan
header already in the skb.  When transmitting skbs that already
have tagged data with partial checksum set, the checksum doesn't
appear to be updated correctly by the card thus resulting in a
failure to establish TCP connections.

The following is a packet trace taken on the receiver where a
sender is a VM with a VLAN configued.  The host VM is running on
doest not have VLAN support and the outging interface on the
host is tg3:
10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294837885 ecr 0,nop,wscale 7], length 0
10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294838888 ecr 0,nop,wscale 7], length 0

This connection finally times out.

I've only access to the TG3 hardware in this configuration thus have
only tested this with TG3 driver.  There are a lot of other drivers
that do not permit user changes to vlan acceleration features, and
I don't know if they all suffere from a similar issue.

The patch attempt to fix this another way.  It moves the vlan header
stipping code out of the vlan module and always builds it into the
kernel network core.  This way, even if vlan is not supported on
a virtualizatoin host, the virtual machines running on top of such
host will still work with VLANs enabled.

CC: Patrick McHardy 
CC: Nithin Nayak Sujir 
CC: Michael Chan 
CC: Jiri Pirko 
Signed-off-by: Vladislav Yasevich 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

vlan: mask vlan prio bits

2013-07-18T20:05:23+00:00

In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e
("vlan: don't deliver frames for unknown vlans to protocols")
Florian made sure we set pkt_type to PACKET_OTHERHOST
if the vlan id is set and we could find a vlan device for this
particular id.

But we also have a problem if prio bits are set.

Steinar reported an issue on a router receiving IPv6 frames with a
vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
because skb->vlan_tci is set.

Forwarded frame is completely corrupted : We can see (8100:4000)
being inserted in the middle of IPv6 source address :

16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 >
9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64
       0x0000:  0000 0029 8000 c7c3 7103 0001 a0ae e651
       0x0010:  0000 0000 ccce 0b00 0000 0000 1011 1213
       0x0020:  1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
       0x0030:  2425 2627 2829 2a2b 2c2d 2e2f 3031 3233

It seems we are not really ready to properly cope with this right now.

We can probably do better in future kernels :
vlan_get_ingress_priority() should be a netdev property instead of
a per vlan_dev one.

For stable kernels, lets clear vlan_tci to fix the bugs.

Reported-by: Steinar H. Gunderson 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-07-03T21:55:13+00:00

Conflicts:
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/ethernet/renesas/sh_eth.c
	net/ipv4/gre.c

The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.

The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.

Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.

Signed-off-by: David S. Miller

net: vlan: fix comment for vlan_ethhdr->h_vlan_proto

2013-06-20T06:16:50+00:00

After addition of 8021AD h_vlan_proto can be either ETH_P_8021Q or
ETH_P_8021AD.

Signed-off-by: Olaf Hering 
Signed-off-by: David S. Miller

net: vlan: minor: remove unused HAVE_VLAN_PUT_TAG

2013-06-07T21:39:05+00:00

Remove the definition of HAVE_VLAN_PUT_TAG since it's not
used or exported anywhere.

Signed-off-by: Daniel Borkmann 
Signed-off-by: David S. Miller

net: vlan: fix dummy function signatures for CONFIG_VLAN=n

2013-04-21T19:56:59+00:00

Fix up some function signatures for CONFIG_VLAN=n that were missed during
the 802.1ad support patches.

Found by the kbuild robot.

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

net: vlan: add 802.1ad support

2013-04-19T18:46:06+00:00

Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.

Configuration is done using "ip link":

# ip link add link eth0 eth0.1000 \
	type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
	type vlan proto 802.1q id 1000

52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
    20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
    20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

net: vlan: add protocol argument to packet tagging functions

2013-04-19T18:46:06+00:00

Add a protocol argument to the VLAN packet tagging functions. In case of HW
tagging, we need that protocol available in the ndo_start_xmit functions,
so it is stored in a new field in the skb. The new field fits into a hole
(on 64 bit) and doesn't increase the sks's size.

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

net: vlan: prepare for 802.1ad support

2013-04-19T18:45:27+00:00

Make the encapsulation protocol value a property of VLAN devices and change
the device lookup functions to take the protocol value into account.

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

net: vlan: prepare for 802.1ad VLAN filtering offload

2013-04-19T18:45:27+00:00

Change the rx_{add,kill}_vid callbacks to take a protocol argument in
preparation of 802.1ad support. The protocol argument used so far is
always htons(ETH_P_8021Q).

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller