linux-toradex.git/include/linux/interrupt.h, branch v4.6-rc6

arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections

2016-03-25T23:37:42+00:00

KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to  so that the
users don't need to pull in .  Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.

Signed-off-by: Alexander Potapenko 
Acked-by: Steven Rostedt 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Andrey Konovalov 
Cc: Dmitry Vyukov 
Cc: Andrey Ryabinin 
Cc: Konstantin Serebryany 
Cc: Dmitry Chernenkov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"

2016-03-09T00:23:35+00:00

Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in
the Interrupt Line register means "unknown" or "no connection."
Previously, when we couldn't derive an IRQ from the _PRT, we fell back to
using the value from Interrupt Line as an IRQ.  It's questionable whether
we should do that at all, but the spec clearly suggests we shouldn't do it
for the value 255 on x86.

Calling request_irq() with IRQ 255 may succeed, but the driver won't
receive any interrupts.  Or, if IRQ 255 is shared with another device, it
may succeed, and the driver's ISR will be called at random times when the
*other* device interrupts.  Or it may fail if another device is using IRQ
255 with incompatible flags.  What we *want* is for request_irq() to fail
predictably so the driver can fall back to polling.

On x86, assume 255 in the Interrupt Line means the INTx line is not
connected.  In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq()
will fail gracefully with -ENOTCONN.

We found this problem on a system where Secure Boot firmware assigned
Interrupt Line 255 to an i801_smbus device and another device was already
using MSI-X IRQ 255.  This was in v3.10, where i801_probe() fails if
request_irq() fails:

  i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
  i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
  i801_smbus 0000:00:1f.3: PCI INT C: no GSI
  genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
  CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
  Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
  Call Trace:
    dump_stack+0x19/0x1b
    __setup_irq+0x54a/0x570
    request_threaded_irq+0xcc/0x170
    i801_probe+0x32f/0x508 [i2c_i801]
    local_pci_probe+0x45/0xa0
  i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
  i801_smbus: probe of 0000:00:1f.3 failed with error -16

After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"),
i801_probe() will fall back to polling if request_irq() fails.  But we
still need this patch because request_irq() may succeed or fail depending
on other devices in the system.  If request_irq() fails, i801_smbus will
work by falling back to polling, but if it succeeds, i801_smbus won't work
because it expects interrupts that it may not receive.

Signed-off-by: Chen Fan 
Acked-by: Thomas Gleixner 
Acked-by: Bjorn Helgaas 
Signed-off-by: Rafael J. Wysocki

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2016-01-24T02:45:06+00:00

Pull rdma updates from Doug Ledford:
 "Initial roundup of 4.5 merge window patches

   - Remove usage of ib_query_device and instead store attributes in
     ib_device struct

   - Move iopoll out of block and into lib, rename to irqpoll, and use
     in several places in the rdma stack as our new completion queue
     polling library mechanism.  Update the other block drivers that
     already used iopoll to use the new mechanism too.

   - Replace the per-entry GID table locks with a single GID table lock

   - IPoIB multicast cleanup

   - Cleanups to the IB MR facility

   - Add support for 64bit extended IB counters

   - Fix for netlink oops while parsing RDMA nl messages

   - RoCEv2 support for the core IB code

   - mlx4 RoCEv2 support

   - mlx5 RoCEv2 support

   - Cross Channel support for mlx5

   - Timestamp support for mlx5

   - Atomic support for mlx5

   - Raw QP support for mlx5

   - MAINTAINERS update for mlx4/mlx5

   - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates

   - Add support for remote invalidate to the iSER driver (pushed
     through the RDMA tree due to dependencies, acknowledged by nab)

   - Update to NFSoRDMA (pushed through the RDMA tree due to
     dependencies, acknowledged by Bruce)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
  IB/mlx5: Unify CQ create flags check
  IB/mlx5: Expose Raw Packet QP to user space consumers
  {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
  IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
  IB/mlx5: Add Raw Packet QP query functionality
  IB/mlx5: Add create and destroy functionality for Raw Packet QP
  IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
  IB/mlx5: Allocate a Transport Domain for each ucontext
  net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
  net/mlx5_core: Add RQ and SQ event handling
  net/mlx5_core: Export transport objects
  IB/mlx5: Expose CQE version to user-space
  IB/mlx5: Add CQE version 1 support to user QPs and SRQs
  IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
  IB/sa: Fix netlink local service GFP crash
  IB/srpt: Remove redundant wc array
  IB/qib: Improve ipoib UD performance
  IB/mlx4: Advertise RoCE v2 support
  IB/mlx4: Create and use another QP1 for RoCEv2
  IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
  ...

irq_poll: make blk-iopoll available outside the block layer

2015-12-11T19:52:24+00:00

The new name is irq_poll as iopoll is already taken.  Better suggestions
welcome.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Bart Van Assche

genirq: Implement irq_percpu_is_enabled()

2015-12-08T11:53:29+00:00

Certain interrupt controller drivers have a register set that does not
make it easy to save/restore the mask of enabled/disabled interrupts
at suspend/resume time. At resume time, such drivers rely on the core
kernel irq subsystem to tell whether such or such interrupt is enabled
or not, in order to restore the proper state in the interrupt
controller register.

While the irqd_irq_disabled() provides the relevant information for
global interrupts, there is no similar function to query the
enabled/disabled state of a per-CPU interrupt.

Therefore, this commit complements the percpu_irq API with an
irq_percpu_is_enabled() function.

[ tglx: Simplified the implementation and added kerneldoc ]

Signed-off-by: Thomas Petazzoni 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Tawfik Bayouk 
Cc: Nadav Haklai 
Cc: Lior Amsalem 
Cc: Andrew Lunn 
Cc: Sebastian Hesselbarth 
Cc: Gregory Clement 
Cc: Jason Cooper 
Cc: Marc Zyngier 
Link: http://lkml.kernel.org/r/1445347435-2333-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Thomas Gleixner

genirq: Handle force threading of irqs with primary and thread handler

2015-09-22T10:39:57+00:00

Force threading of interrupts does not really deal with interrupts
which are requested with a primary and a threaded handler. The current
policy is to leave them alone and let the primary handler run in
interrupt context, but we set the ONESHOT flag for those interrupts as
well.

Kohji Okuno debugged a problem with the SDHCI driver where the
interrupt thread waits for a hardware interrupt to trigger, which can't
work well because the hardware interrupt is masked due to the ONESHOT
flag being set. He proposed to set the ONESHOT flag only if the
interrupt does not provide a thread handler.

Though that does not work either because these interrupts can be
shared. So the other interrupt would rightfully get the ONESHOT flag
set and therefor the same situation would happen again.

To deal with this proper, we need to force thread the primary handler
of such interrupts as well. That means that the primary interrupt
handler is treated as any other primary interrupt handler which is not
marked IRQF_NO_THREAD. The threaded handler becomes a separate thread
so the SDHCI flow logic can be handled gracefully.

The same issue was reported against 4.1-rt.

Reported-and-tested-by: Kohji Okuno 
Reported-By: Michal Smucr 
Reported-and-tested-by: Nathan Sullivan 
Signed-off-by: Thomas Gleixner 
Cc: Sebastian Andrzej Siewior 
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos
Signed-off-by: Thomas Gleixner

hrtimer: Remove hrtimer_start() return value

2015-04-22T15:06:52+00:00

No user was ever interested whether the timer was active or not when
it was started. All abusers of the return value are gone, so get rid
of it.

Signed-off-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Preeti U Murthy 
Cc: Viresh Kumar 
Cc: Marcelo Tosatti 
Cc: Frederic Weisbecker 
Link: http://lkml.kernel.org/r/20150414203503.483556394@linutronix.de
Signed-off-by: Thomas Gleixner

hrtimer: Get rid of hrtimer softirq

2015-04-22T15:06:50+00:00

hrtimer softirq is a leftover from the initial implementation and
serves only the purpose to handle the enqueueing of already expired
timers in the high resolution timer mode. We discussed whether we
change the return value and force all start sites to handle that the
timer is already expired, but that would be a Herculean task and I'm
not sure whether its a good idea to enforce that handling on
everyone.

A simpler solution is to enforce a timer interrupt instead of raising
and scheduling a softirq. Just use the existing infrastructure to do
so and remove all the softirq leftovers.

The HRTIMER softirq enum is now unused, but kept around because trace
parsers rely on the existing numbering.

Signed-off-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Preeti U Murthy 
Cc: Viresh Kumar 
Cc: Marcelo Tosatti 
Cc: Frederic Weisbecker 
Link: http://lkml.kernel.org/r/20150414203501.840834708@linutronix.de
Signed-off-by: Thomas Gleixner

genirq: Allow the irqchip state of an IRQ to be save/restored

2015-04-08T21:28:28+00:00

There is a number of cases where a kernel subsystem may want to
introspect the state of an interrupt at the irqchip level:

- When a peripheral is shared between virtual machines,
  its interrupt state becomes part of the guest's state,
  and must be switched accordingly. KVM on arm/arm64 requires
  this for its guest-visible timer
- Some GPIO controllers seem to require peeking into the
  interrupt controller they are connected to to report
  their internal state

This seem to be a pattern that is common enough for the core code
to try and support this without too many horrible hacks. Introduce
a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state)
to retrieve the bits that can be of interest to another subsystem:
pending, active, and masked.

- irq_get_irqchip_state returns the state of the interrupt according
  to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE,
  IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL.
- irq_set_irqchip_state similarly sets the state of the interrupt.

Signed-off-by: Marc Zyngier 
Reviewed-by: Bjorn Andersson 
Tested-by: Bjorn Andersson 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Abhijeet Dharmapurikar 
Cc: Stephen Boyd 
Cc: Phong Vo 
Cc: Linus Walleij 
Cc: Tin Huynh 
Cc: Y Vo 
Cc: Toan Le 
Cc: Bjorn Andersson 
Cc: Jason Cooper 
Cc: Arnd Bergmann 
Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

Merge branch 'linus' into irq/core to get the GIC updates which

2015-04-08T21:26:21+00:00

conflict with pending GIC changes.

Conflicts:
	drivers/usb/isp1760/isp1760-core.c