linux-toradex.git/include/linux/irq.h, branch v4.3-rc3

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Jiang Liu

genirq: Move field 'msi_desc' from irq_data into irq_common_data

2015-09-16T13:46:49+00:00

MSI descriptors are per-irq instead of per irqchip, so move it into
struct irq_common_data.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Bjorn Helgaas 
Cc: Benjamin Herrenschmidt 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Jason Cooper 
Cc: Kevin Cernekee 
Cc: Arnd Bergmann 
Cc: Marc Zyngier 
Link: http://lkml.kernel.org/r/1433145945-789-35-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

genirq: Move field 'affinity' from irq_data into irq_common_data

2015-09-16T13:46:49+00:00

Irq affinity mask is per-irq instead of per irqchip, so move it into
struct irq_common_data.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Bjorn Helgaas 
Cc: Benjamin Herrenschmidt 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Jason Cooper 
Cc: Kevin Cernekee 
Cc: Arnd Bergmann 
Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

genirq: Move field 'handler_data' from irq_data into irq_common_data

2015-09-16T13:46:49+00:00

Handler data (handler_data) is per-irq instead of per irqchip, so move
it into struct irq_common_data.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Bjorn Helgaas 
Cc: Benjamin Herrenschmidt 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Jason Cooper 
Cc: Kevin Cernekee 
Cc: Arnd Bergmann 
Cc: Marc Zyngier 
Link: http://lkml.kernel.org/r/1433145945-789-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

genirq: Move field 'node' from irq_data into irq_common_data

2015-09-16T13:46:49+00:00

NUMA node information is per-irq instead of per-irqchip, so move it into
struct irq_common_data. Also use CONFIG_NUMA to guard irq_common_data.node.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Bjorn Helgaas 
Cc: Benjamin Herrenschmidt 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Jason Cooper 
Cc: Kevin Cernekee 
Cc: Arnd Bergmann 
Link: http://lkml.kernel.org/r/1433145945-789-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

genirq: Provide IRQD_FORWARDED_TO_VCPU status flag

2015-09-16T13:46:48+00:00

Provide a irq data flag to mark an irq forwarded to a VCPU along with
the accessor functions.

Signed-off-by: Thomas Gleixner 
Acked-by: Marc Zyngier

genirq: Remove stale comment

2015-09-15T15:06:29+00:00

Signed-off-by: Thomas Gleixner

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-01T21:33:35+00:00

Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...

genirq: Introduce irq_chip_set_type_parent() helper

2015-08-19T22:25:25+00:00

This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.

This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.

[ tglx: Massaged changelog ]

Signed-off-by: Grygorii Strashko 
Cc: Sudeep Holla 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner

genirq: Add chip_[suspend|resume] PM support to irq_chip

2015-07-27T06:09:38+00:00

Some (admittedly odd) irqchips perform functions that are not directly
related to any of their child IRQ lines, and therefore need to perform
some tasks during suspend/resume regardless of whether there are
any "installed" interrupts for the irqchip. However, the current
generic-chip framework does not call the chip's irq_{suspend,resume}
when there are no interrupts installed (this makes sense, because there
are no irq_data objects for such a call to be made).

More specifically, irq-bcm7120-l2 configures both a forwarding mask
(which affects other top-level GIC IRQs) and a second-level interrupt
mask (for managing its own child interrupts). The former must be
saved/restored on suspend/resume, even when there's nothing to do for
the latter.

This patch adds a new set of suspend/resume hooks to irq_chip_generic,
to help represent *chip* suspend/resume, rather than IRQ suspend/resume.
These callbacks will always be called for an IRQ chip (regardless of the
installed interrupts) and are based on the per-chip irq_chip_generic
struct, rather than the per-IRQ irq_data struct.

The original problem report is described in extra detail here:
http://lkml.kernel.org/g/20150619224123.GL4917@ld-irv-0074

Signed-off-by: Brian Norris 
Tested-by: Florian Fainelli 
Cc: Gregory Fong 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/1437607300-40858-1-git-send-email-computersforpeace@gmail.com
Signed-off-by: Thomas Gleixner