linux-toradex.git/include/linux/irqchip/arm-gic.h, branch v3.12-rc6 Linux kernel for Apalis and Colibri modules drivers: irq-chip: irq-gic: introduce gic_cpu_if_down() 2013-08-28T18:28:43+00:00 Nicolas Pitre nicolas.pitre@linaro.org 2013-03-20T03:59:04+00:00 10d9eb8a17cfb697967928bde06f3e7e530b03ac When processors are about to hit low power states, the assertion of standbywfi signal, triggered by the wfi instruction, is essential to entering low power modes. If an IRQ is pending on the processor at the time wfi is issued, the wfi instruction completes and the processor restarts execution without asserting the standbywfi signal. Depending on the platform power controller HW this behaviour can be acceptable or not; if this behaviour must be prevented software should be provided with a way to disable the routing of interrupts to the core IRQ pins. On systems where raw GIC distributor interrupts are connected to the power controller as wake-up events (hence the power controller still senses IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can be disabled on power down, so that the GIC CPU IF output is gated and wfi cannot complete, thereby preventing the standbywfi issue. This patch adds a simple function to the GIC driver that allows to disable the GIC CPU IF from power down procedures. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [rewrote commit log] Signed-off-by: Olof Johansson <olof@lixom.net> 
When processors are about to hit low power states, the assertion of
standbywfi signal, triggered by the wfi instruction, is essential to
entering low power modes. If an IRQ is pending on the processor at the
time wfi is issued, the wfi instruction completes and the processor
restarts execution without asserting the standbywfi signal. Depending
on the platform power controller HW this behaviour can be acceptable or
not; if this behaviour must be prevented software should be provided
with a way to disable the routing of interrupts to the core IRQ pins.

On systems where raw GIC distributor interrupts are connected to the power
controller as wake-up events (hence the power controller still senses
IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can
be disabled on power down, so that the GIC CPU IF output is gated and wfi
cannot complete, thereby preventing the standbywfi issue.

This patch adds a simple function to the GIC driver that allows to
disable the GIC CPU IF from power down procedures.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[rewrote commit log]

Signed-off-by: Olof Johansson <olof@lixom.net>
irqchip: gic: Perform the gic_secondary_init() call via CPU notifier 2013-03-26T16:12:02+00:00 Catalin Marinas catalin.marinas@arm.com 2013-01-14T18:05:37+00:00 c0114709ed85a5693eb74acdfa03d94f7f12e5b8 All the calls to gic_secondary_init() pass 0 as the first argument. Since this function is called on each CPU when starting, it can be done in a platform-independent way via a CPU notifier registered by the GIC code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Barry Song <baohua.song@csr.com> 
All the calls to gic_secondary_init() pass 0 as the first argument.
Since this function is called on each CPU when starting, it can be done
in a platform-independent way via a CPU notifier registered by the GIC
code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Tested-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Barry Song <baohua.song@csr.com>
ARM: gic: add __ASSEMBLY__ guard to C definitions 2013-02-11T18:58:34+00:00 Marc Zyngier marc.zyngier@arm.com 2013-01-24T13:39:43+00:00 a96ab03917dcf4c9477d03b31e8d74779bca1074 The GIC include file being used by some of the KVM assembly code, wrap the C definitions with a #ifdef __ASSEMBLY__ guard. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 
The GIC include file being used by some of the KVM assembly code,
wrap the C definitions with a #ifdef __ASSEMBLY__ guard.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
ARM: gic: define GICH offsets for VGIC support 2013-02-11T18:58:23+00:00 Marc Zyngier marc.zyngier@arm.com 2013-01-22T00:36:11+00:00 fdf77a72ec110572ac033d499c8be8b389c05740 The GICH_* constants are defined by the GIC HW spec, and even though they only be used by KVM to begin with, define them generically in gic.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 
The GICH_* constants are defined by the GIC HW spec, and even though
they only be used by KVM to begin with, define them generically in gic.h.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
ARM: gic: add missing distributor defintions 2013-02-11T18:57:47+00:00 Christoffer Dall c.dall@virtualopensystems.com 2013-01-23T18:18:03+00:00 7c7945a8f971e0b9cbdd7684ee106de768a0e474 Add missing register map offsets for the distributor and rename GIC_DIST_ACTIVE_BIT to GIC_DIST_ACTIVE_SET to be consistent. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 
Add missing register map offsets for the distributor and rename
GIC_DIST_ACTIVE_BIT to GIC_DIST_ACTIVE_SET to be consistent.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h 2013-01-12T16:47:32+00:00 Rob Herring rob.herring@calxeda.com 2012-12-27T19:10:24+00:00 520f7bd73354f003a9a59937b28e4903d985c420 Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> 
Now that we have GIC moved to drivers/irqchip and all GIC DT init for
platforms using irqchip_init, move gic.h and update the remaining
includes.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>