linux-toradex.git/include/linux/jbd2.h, branch v5.19-rc8

jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio

2022-05-10T03:12:33+00:00

Also convert it to return a bool since it's called from release_folio().

Signed-off-by: Matthew Wilcox (Oracle) 
Acked-by: Theodore Ts'o 
Reviewed-by: Jeff Layton

Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache

2022-03-23T01:26:56+00:00

Pull filesystem folio updates from Matthew Wilcox:
 "Primarily this series converts some of the address_space operations to
  take a folio instead of a page.

  Notably:

   - a_ops->is_partially_uptodate() takes a folio instead of a page and
     changes the type of the 'from' and 'count' arguments to make it
     obvious they're bytes.

   - a_ops->invalidatepage() becomes ->invalidate_folio() and has a
     similar type change.

   - a_ops->launder_page() becomes ->launder_folio()

   - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
     address_space as an argument.

  There are a couple of other misc changes up front that weren't worth
  separating into their own pull request"

* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
  fs: Remove aops ->set_page_dirty
  fb_defio: Use noop_dirty_folio()
  fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
  fs: Convert __set_page_dirty_buffers to block_dirty_folio
  nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
  mm: Convert swap_set_page_dirty() to swap_dirty_folio()
  ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
  f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
  f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
  f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
  afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
  btrfs: Convert extent_range_redirty_for_io() to use folios
  fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
  btrfs: Convert from set_page_dirty to dirty_folio
  fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
  fs: Add aops->dirty_folio
  fs: Remove aops->launder_page
  orangefs: Convert launder_page to launder_folio
  nfs: Convert from launder_page to launder_folio
  fuse: Convert from launder_page to launder_folio
  ...

ext4: Convert invalidatepage to invalidate_folio

2022-03-15T12:23:30+00:00

Extensive changes, but fairly mechanical.

Signed-off-by: Matthew Wilcox (Oracle) 
Tested-by: Damien Le Moal 
Acked-by: Damien Le Moal 
Tested-by: Mike Marshall  # orangefs
Tested-by: David Howells  # afs

jbd2: kill t_handle_lock transaction spinlock

2022-02-26T02:28:13+00:00

This patch kills t_handle_lock transaction spinlock completely from
jbd2.

To explain the reasoning, currently there were three sites at which
this spinlock was used.

1. jbd2_journal_wait_updates()
   a. Based on careful code review it can be seen that, we don't need this
      lock here. This is since we wait for any currently ongoing updates
      based on a atomic variable t_updates. And we anyway don't take any
      t_handle_lock while in stop_this_handle().
      i.e.

	write_lock(&journal->j_state_lock()
	jbd2_journal_wait_updates() 			stop_this_handle()
		while (atomic_read(txn->t_updates) { 		|
		DEFINE_WAIT(wait); 				|
		prepare_to_wait(); 				|
		if (atomic_read(txn->t_updates) 		if (atomic_dec_and_test(txn->t_updates))
			write_unlock(&journal->j_state_lock);
			schedule();					wake_up()
			write_lock(&journal->j_state_lock);
		finish_wait();
	   }
	txn->t_state = T_COMMIT
	write_unlock(&journal->j_state_lock);

   b.  Also note that between atomic_inc(&txn->t_updates) in
       start_this_handle() and jbd2_journal_wait_updates(), the
       synchronization happens via read_lock(journal->j_state_lock) in
       start_this_handle();

2. jbd2_journal_extend()
   a. jbd2_journal_extend() is called with the handle of each process from
      task_struct. So no lock required in updating member fields of handle_t

   b. For member fields of h_transaction, all updates happens only via
      atomic APIs (which is also within read_lock()).
      So, no need of this transaction spinlock.

3. update_t_max_wait()
   Based on Jan suggestion, this can be carefully removed using atomic
   cmpxchg API.
   Note that there can be several processes which are waiting for a new
   transaction to be allocated and started. For doing this only one
   process will succeed in taking write_lock() and allocating a new txn.
   After that all of the process will be updating the t_max_wait (max
   transaction wait time). This can be done via below method w/o taking
   any locks using atomic cmpxchg.
   For more details refer [1]

	   new = get_new_val();
	   old = READ_ONCE(ptr->max_val);
	   while (old < new)
		old = cmpxchg(&ptr->max_val, old, new);

[1]: https://lwn.net/Articles/849237/

Suggested-by: Jan Kara 
Signed-off-by: Ritesh Harjani 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/d89e599658b4a1f3893a48c6feded200073037fc.1644992076.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o

jbd2: refactor wait logic for transaction updates into a common function

2022-02-03T15:57:44+00:00

No functionality change as such in this patch. This only refactors the
common piece of code which waits for t_updates to finish into a common
function named as jbd2_journal_wait_updates(journal_t *)

Signed-off-by: Ritesh Harjani 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/8c564f70f4b2591171677a2a74fccb22a7b6c3a4.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o

jbd2: cleanup unused functions declarations from jbd2.h

2022-02-03T15:57:44+00:00

During code review found no references of few of these below function
declarations. This patch cleans those up from jbd2.h

Signed-off-by: Ritesh Harjani 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/30d1fc327becda197a4136cf9cdc73d9baa3b7b9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o

ext4: fast commit may not fallback for ineligible commit

2022-02-03T15:56:39+00:00

For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync

In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.

Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.

Reported-by: kernel test robot 
Reported-by: Dan Carpenter 
Reported-by: Ritesh Harjani 
Suggested-by: Harshad Shirwadkar 
Signed-off-by: Xin Yin 
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o 
Cc: stable@kernel.org

ext4: inline jbd2_journal_[un]register_shrinker()

2021-07-08T12:37:31+00:00

The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted.  On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.

Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy().  This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.

Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.

Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7e3 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter 
Reported-by: Sachin Sant 
Tested-by: Sachin Sant 
Tested-by: Jon Hunter 
Reviewed-by: Jan Kara 
Signed-off-by: Theodore Ts'o

jbd2,ext4: add a shrinker to release checkpointed buffers

2021-06-24T14:54:49+00:00

Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.

One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.

This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.

Signed-off-by: Zhang Yi 
Suggested-by: Jan Kara 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o

jbd2: ensure abort the journal if detect IO error when writing original buffer back

2021-06-24T14:33:49+00:00

Although we merged c044f3d8360 ("jbd2: abort journal if free a async
write error metadata buffer"), there is a race between
jbd2_journal_try_to_free_buffers() and jbd2_journal_destroy(), so the
jbd2_log_do_checkpoint() may still fail to detect the buffer write
io error flag which may lead to filesystem inconsistency.

jbd2_journal_try_to_free_buffers()     ext4_put_super()
                                        jbd2_journal_destroy()
  __jbd2_journal_remove_checkpoint()
  detect buffer write error              jbd2_log_do_checkpoint()
                                         jbd2_cleanup_journal_tail()
                                           <--- lead to inconsistency
  jbd2_journal_abort()

Fix this issue by introducing a new atomic flag which only have one
JBD2_CHECKPOINT_IO_ERROR bit now, and set it in
__jbd2_journal_remove_checkpoint() when freeing a checkpoint buffer
which has write_io_error flag. Then jbd2_journal_destroy() will detect
this mark and abort the journal to prevent updating log tail.

Signed-off-by: Zhang Yi 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20210610112440.3438139-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o