linux-toradex.git/include/linux/livepatch.h, branch v4.14-rc3

livepatch: allow removal of a disabled patch

2017-03-08T08:38:43+00:00

Currently we do not allow patch module to unload since there is no
method to determine if a task is still running in the patched code.

The consistency model gives us the way because when the unpatching
finishes we know that all tasks were marked as safe to call an original
function. Thus every new call to the function calls the original code
and at the same time no task can be somewhere in the patched code,
because it had to leave that code to be marked as safe.

We can safely let the patch module go after that.

Completion is used for synchronization between module removal and sysfs
infrastructure in a similar way to commit 942e443127e9 ("module: Fix
mod->mkobj.kobj potentially freed too early").

Note that we still do not allow the removal for immediate model, that is
no consistency model. The module refcount may increase in this case if
somebody disables and enables the patch several times. This should not
cause any harm.

With this change a call to try_module_get() is moved to
__klp_enable_patch from klp_register_patch to make module reference
counting symmetric (module_put() is in a patch disable path) and to
allow to take a new reference to a disabled module when being enabled.

Finally, we need to be very careful about possible races between
klp_unregister_patch(), kobject_put() functions and operations
on the related sysfs files.

kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise,
it might be blocked by enabled_store() that needs the mutex as well.
In addition, enabled_store() must check if the patch was not
unregisted in the meantime.

There is no need to do the same for other kobject_put() callsites
at the moment. Their sysfs operations neither take the lock nor
they access any data that might be freed in the meantime.

There was an attempt to use kobjects the right way and prevent these
races by design. But it made the patch definition more complicated
and opened another can of worms. See
https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com

[Thanks to Petr Mladek for improving the commit message.]

Signed-off-by: Miroslav Benes 
Signed-off-by: Josh Poimboeuf 
Reviewed-by: Petr Mladek 
Acked-by: Miroslav Benes 
Signed-off-by: Jiri Kosina

livepatch: change to a per-task consistency model

2017-03-08T08:36:21+00:00

Change livepatch to use a basic per-task consistency model.  This is the
foundation which will eventually enable us to patch those ~10% of
security patches which change function or data semantics.  This is the
biggest remaining piece needed to make livepatch more generally useful.

This code stems from the design proposal made by Vojtech [1] in November
2014.  It's a hybrid of kGraft and kpatch: it uses kGraft's per-task
consistency and syscall barrier switching combined with kpatch's stack
trace switching.  There are also a number of fallback options which make
it quite flexible.

Patches are applied on a per-task basis, when the task is deemed safe to
switch over.  When a patch is enabled, livepatch enters into a
transition state where tasks are converging to the patched state.
Usually this transition state can complete in a few seconds.  The same
sequence occurs when a patch is disabled, except the tasks converge from
the patched state to the unpatched state.

An interrupt handler inherits the patched state of the task it
interrupts.  The same is true for forked tasks: the child inherits the
patched state of the parent.

Livepatch uses several complementary approaches to determine when it's
safe to patch tasks:

1. The first and most effective approach is stack checking of sleeping
   tasks.  If no affected functions are on the stack of a given task,
   the task is patched.  In most cases this will patch most or all of
   the tasks on the first try.  Otherwise it'll keep trying
   periodically.  This option is only available if the architecture has
   reliable stacks (HAVE_RELIABLE_STACKTRACE).

2. The second approach, if needed, is kernel exit switching.  A
   task is switched when it returns to user space from a system call, a
   user space IRQ, or a signal.  It's useful in the following cases:

   a) Patching I/O-bound user tasks which are sleeping on an affected
      function.  In this case you have to send SIGSTOP and SIGCONT to
      force it to exit the kernel and be patched.
   b) Patching CPU-bound user tasks.  If the task is highly CPU-bound
      then it will get patched the next time it gets interrupted by an
      IRQ.
   c) In the future it could be useful for applying patches for
      architectures which don't yet have HAVE_RELIABLE_STACKTRACE.  In
      this case you would have to signal most of the tasks on the
      system.  However this isn't supported yet because there's
      currently no way to patch kthreads without
      HAVE_RELIABLE_STACKTRACE.

3. For idle "swapper" tasks, since they don't ever exit the kernel, they
   instead have a klp_update_patch_state() call in the idle loop which
   allows them to be patched before the CPU enters the idle state.

   (Note there's not yet such an approach for kthreads.)

All the above approaches may be skipped by setting the 'immediate' flag
in the 'klp_patch' struct, which will disable per-task consistency and
patch all tasks immediately.  This can be useful if the patch doesn't
change any function or data semantics.  Note that, even with this flag
set, it's possible that some tasks may still be running with an old
version of the function, until that function returns.

There's also an 'immediate' flag in the 'klp_func' struct which allows
you to specify that certain functions in the patch can be applied
without per-task consistency.  This might be useful if you want to patch
a common function like schedule(), and the function change doesn't need
consistency but the rest of the patch does.

For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user
must set patch->immediate which causes all tasks to be patched
immediately.  This option should be used with care, only when the patch
doesn't change any function or data semantics.

In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE
may be allowed to use per-task consistency if we can come up with
another way to patch kthreads.

The /sys/kernel/livepatch//transition file shows whether a patch
is in transition.  Only a single patch (the topmost patch on the stack)
can be in transition at a given time.  A patch can remain in transition
indefinitely, if any of the tasks are stuck in the initial patch state.

A transition can be reversed and effectively canceled by writing the
opposite value to the /sys/kernel/livepatch//enabled file while
the transition is in progress.  Then all the tasks will attempt to
converge back to the original patch state.

[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz

Signed-off-by: Josh Poimboeuf 
Acked-by: Miroslav Benes 
Acked-by: Ingo Molnar         # for the scheduler changes
Signed-off-by: Jiri Kosina

livepatch: store function sizes

2017-03-08T08:24:04+00:00

For the consistency model we'll need to know the sizes of the old and
new functions to determine if they're on the stacks of any tasks.

Signed-off-by: Josh Poimboeuf 
Acked-by: Miroslav Benes 
Reviewed-by: Petr Mladek 
Reviewed-by: Kamalesh Babulal 
Signed-off-by: Jiri Kosina

livepatch: separate enabled and patched states

2017-03-08T08:23:16+00:00

Once we have a consistency model, patches and their objects will be
enabled and disabled at different times.  For example, when a patch is
disabled, its loaded objects' funcs can remain registered with ftrace
indefinitely until the unpatching operation is complete and they're no
longer in use.

It's less confusing if we give them different names: patches can be
enabled or disabled; objects (and their funcs) can be patched or
unpatched:

- Enabled means that a patch is logically enabled (but not necessarily
  fully applied).

- Patched means that an object's funcs are registered with ftrace and
  added to the klp_ops func stack.

Also, since these states are binary, represent them with booleans
instead of ints.

Signed-off-by: Josh Poimboeuf 
Acked-by: Miroslav Benes 
Reviewed-by: Petr Mladek 
Reviewed-by: Kamalesh Babulal 
Signed-off-by: Jiri Kosina

livepatch: create temporary klp_update_patch_state() stub

2017-03-08T08:19:16+00:00

Create temporary stubs for klp_update_patch_state() so we can add
TIF_PATCH_PENDING to different architectures in separate patches without
breaking build bisectability.

Signed-off-by: Josh Poimboeuf 
Reviewed-by: Petr Mladek 
Signed-off-by: Jiri Kosina

livepatch: use arch_klp_init_object_loaded() to finish arch-specific tasks

2016-08-18T21:41:55+00:00

Introduce arch_klp_init_object_loaded() to complete any additional
arch-specific tasks during patching. Architecture code may override this
function.

Signed-off-by: Jessica Yu 
Reviewed-by: Petr Mladek 
Acked-by: Miroslav Benes 
Signed-off-by: Jiri Kosina

Merge branches 'for-4.7/core', 'for-4.7/livepatching-doc' and 'for-4.7/livepatching-ppc64' into for-linus

2016-05-17T10:06:35+00:00

livepatch: make object/func-walking helpers more robust

2016-04-29T22:04:08+00:00

Current object-walking helper checks the presence of obj->funcs to
determine the end of objs array in klp_object structure. This is
somewhat fragile because one can easily forget about funcs definition
during livepatch creation. In such a case the livepatch module is
successfully loaded and all objects after the incorrect one are omitted.
This is very confusing. Let's make the helper more robust and check also
for the other external member, name. Thus the helper correctly stops on
an empty item of the array. We need to have a check for obj->funcs in
klp_init_object() to make it work.

The same applies to a func-walking helper.

As a benefit we'll check for new_func member definition during the
livepatch initialization. There is no such check anywhere in the code
now.

[jkosina@suse.cz: fix shortlog]
Signed-off-by: Miroslav Benes 
Acked-by: Josh Poimboeuf 
Acked-by: Jessica Yu 
Signed-off-by: Jiri Kosina

livepatch: reuse module loader code to write relocations

2016-04-01T13:00:11+00:00

Reuse module loader code to write relocations, thereby eliminating the need
for architecture specific relocation code in livepatch. Specifically, reuse
the apply_relocate_add() function in the module loader to write relocations
instead of duplicating functionality in livepatch's arch-dependent
klp_write_module_reloc() function.

In order to accomplish this, livepatch modules manage their own relocation
sections (marked with the SHF_RELA_LIVEPATCH section flag) and
livepatch-specific symbols (marked with SHN_LIVEPATCH symbol section
index). To apply livepatch relocation sections, livepatch symbols
referenced by relocs are resolved and then apply_relocate_add() is called
to apply those relocations.

In addition, remove x86 livepatch relocation code and the s390
klp_write_module_reloc() function stub. They are no longer needed since
relocation work has been offloaded to module loader.

Lastly, mark the module as a livepatch module so that the module loader
canappropriately identify and initialize it.

Signed-off-by: Jessica Yu 
Reviewed-by: Miroslav Benes 
Acked-by: Josh Poimboeuf 
Acked-by: Heiko Carstens    # for s390 changes
Signed-off-by: Jiri Kosina

livepatch/module: remove livepatch module notifier

2016-03-17T08:45:10+00:00

Remove the livepatch module notifier in favor of directly enabling and
disabling patches to modules in the module loader. Hard-coding the
function calls ensures that ftrace_module_enable() is run before
klp_module_coming() during module load, and that klp_module_going() is
run before ftrace_release_mod() during module unload. This way, ftrace
and livepatch code is run in the correct order during the module
load/unload sequence without dependence on the module notifier call chain.

Signed-off-by: Jessica Yu 
Reviewed-by: Petr Mladek 
Acked-by: Josh Poimboeuf 
Acked-by: Rusty Russell 
Signed-off-by: Jiri Kosina