Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

Pull sound updates from Takashi Iwai:
 "Mostly many small changes spread as seen in diffstat in sound/*
  directory by this update.  A significant change in the subsystem level
  is the introduction of snd_soc_component, which will help more generic
  handling of SoC and off-SoC components.

  Also, snd_BUG_ON() macro is enabled unconditionally now due to its
  misuses, so people might hit kernel warnings (it's a good thing for
  us).

   - compress-offload: support for capture by Charles Keepax
   - HD-audio: codec delay support by Dylan Reid
   - HD-audio: improvements/fixes in generic parser: better headphone
     mic and headset mic support, jack_modes hint consolidation, proper
     beep attach/detachment, generalized power filter controls by David
     Henningsson, et al
   - HD-audio: Improved management of HDMI codec pins/converters
   - HD-audio: Better pin/DAC assignment for VIA codecs
   - HD-audio: Haswell HDMI workarounds
   - HD-audio: ALC268 codec support, a few new quirks for Chromebooks
   - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency
     fix by Clemens Ladisch
   - USB: support for DSD formats by Daniel Mack
   - USB: A few UAC2 device endian/cock fixes by Eldad Zack
   - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller,
     Yamaha THRxx devices
   - HDSPM: updates for TCO controls by Adrian Knoth
   - ASoC: Add a snd_soc_component object type for generic handling of
     SoC and off-SoC components by Kuninori Morimoto,
   - dmaengine: a large set of cleanups and conversions by Lars-Peter
     Clausen
   - ASoC DAPM: performance optimizations from Ryo Tsutsui
   - ASoC DAPM: support for mixer control sharing by Stephen Warren
   - ASoC: multiplatform ARM cleanups from Arnd Bergmann
   - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits)
  ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
  ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats
  ALSA: pcm_format_to_bits strong-typed conversion
  ALSA: compress: fix the states to check for allowing read
  ALSA: hda - Move Thinkpad X220 to use auto parser
  ALSA: USB: adjust for changed 3.8 USB API
  ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources
  sound: oss/dmabuf: use dma_map_single
  ALSA: ali5451: use mdelay instead of large udelay constants
  ALSA: hda - Add the support for ALC286 codec
  ALSA: usb-audio: USB quirk for Yamaha THR10C
  ALSA: usb-audio: USB quirk for Yamaha THR5A
  ALSA: usb-audio: USB quirk for Yamaha THR10
  ALSA: usb-audio: Fix autopm error during probing
  ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT
  ALSA: sound kconfig typo
  ALSA: emu10k1: Fix dock firmware loading
  ASoC: ux500: forward declare msp_i2s_platform_data
  ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes
  ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers
  ...

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

If a GPIO is specified for the chip IRQ line then request it. This
improves support for systems that do not put pins into input mode when
used as interrupts.

Also use this GPIO when the primary IRQ is in edge triggered mode to
detect if we have handled pending interrupts in order to improve
robustness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Allow the user to configure edge triggered IRQs, though we do not yet
fully handle new interrupts occurring while an interrupt is being handled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Help mitigate against mechanical bounce during the initial detection by
allowing the configuration of an additional debounce on top of that the
hardware does during the initial phase of microphone detection operation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Rather than measuring both HP channels we can simply directly measure the
microphone impedance and then rely on MICDET for final confirmation of the
presence of a suitable microphone. This improves the overall performance
of the identification process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

In some designs an external pull won't be needed.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>