linux-toradex.git/include/linux/mfd/dbx500-prcmu.h, branch v5.6-rc7 Linux kernel for Apalis and Colibri modules mfd: dbx500-prcmu: Drop DSI pll clock functions 2020-01-24T07:33:58+00:00 Linus Walleij linus.walleij@linaro.org 2019-12-28T22:26:15+00:00 2cce09eb11228386260a1b73133aee41f4bb33b1 The DSI PLLs are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
The DSI PLLs are handled by the generic clock framework
since ages, this code is completely unused and misleading.
Delete it.

Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: dbx500-prcmu: Drop set_display_clocks() 2020-01-24T07:33:58+00:00 Linus Walleij linus.walleij@linaro.org 2019-12-28T22:26:14+00:00 f41810921bdca37161a63f689cdcb36155f0fad6 The display clocks are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
The display clocks are handled by the generic clock framework
since ages, this code is completely unused and misleading.
Delete it.

Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: db8500-prcmu: Support U8420-sysclk firmware 2019-11-11T08:45:04+00:00 Linus Walleij linus.walleij@linaro.org 2019-10-26T21:47:32+00:00 22fb3ad0cc5f578398953ddcab9c8239a08caccd There is a distinct version of the Ux500 U8420 variant with "sysclk", as can be seen from the vendor code that didn't make it upstream, this firmware lacks the ULPPLL (ultra-low power phase locked loop) which in effect means that the timer clock is instead wired to the 32768 Hz always-on clock. This has some repercussions when enabling the timer clock as the code as it stands will disable the timer clock on these platforms (lacking the so-called "doze mode") and obtaining the wrong rate of the timer clock. The timer frequency is of course needed very early in the boot, and as a consequence, we need to shuffle around the early PRCMU init code: whereas in the past we did not need to look up the PRCMU firmware version in the early init, but now we need to know the version before the core system timers are registered so we restructure the platform callbacks to the PRCMU so as not to take any arguments and instead look up the resources it needs directly from the device tree when initializing. As we do not yet support any platforms using this firmware it is not a regression, but as PostmarketOS is starting to support products with this firmware we need to fix this up. The low rate of 32kHz also makes the MTU timer unsuitable as delay timer but this needs to be fixed in a separate patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
There is a distinct version of the Ux500 U8420 variant
with "sysclk", as can be seen from the vendor code that
didn't make it upstream, this firmware lacks the
ULPPLL (ultra-low power phase locked loop) which in
effect means that the timer clock is instead wired to
the 32768 Hz always-on clock.

This has some repercussions when enabling the timer
clock as the code as it stands will disable the timer
clock on these platforms (lacking the so-called
"doze mode") and obtaining the wrong rate of the timer
clock.

The timer frequency is of course needed very early in
the boot, and as a consequence, we need to shuffle
around the early PRCMU init code: whereas in the past
we did not need to look up the PRCMU firmware version
in the early init, but now we need to know the version
before the core system timers are registered so we
restructure the platform callbacks to the PRCMU so as
not to take any arguments and instead look up the
resources it needs directly from the device tree
when initializing.

As we do not yet support any platforms using this
firmware it is not a regression, but as PostmarketOS
is starting to support products with this firmware we
need to fix this up.

The low rate of 32kHz also makes the MTU timer unsuitable
as delay timer but this needs to be fixed in a separate
patch.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197 2019-05-30T18:29:22+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-28T16:57:24+00:00 0376148f303c7e87ff3577dac7d76b93e3a5779a Based on 1 normalized pattern(s): license terms gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 37 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.724130665@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  license terms gnu general public license v2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 37 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.724130665@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls 2016-10-04T14:48:05+00:00 Lee Jones lee.jones@linaro.org 2016-09-14T10:51:42+00:00 45ff2b685a6e8588ed637ba711b9a42ad1963066 There are no call sites for these functions. Strip them out. Signed-off-by: Lee Jones <lee.jones@linaro.org> 
There are no call sites for these functions.  Strip them out.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: db8500 stop passing around platform data 2016-07-12T09:23:58+00:00 Arnd Bergmann arnd@arndb.de 2016-03-18T15:53:31+00:00 4e657946cbf68998b51b331375a1209e90792fe4 Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing is ever passed through the platform data and used in a driver, so we can simply stop passing it around. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing
is ever passed through the platform data and used in a driver, so we
can simply stop passing it around.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mfd: dbx500/abx500: root out hardcoded IRQ assignments 2014-03-04T00:58:11+00:00 Linus Walleij linus.walleij@linaro.org 2014-02-03T23:35:56+00:00 f864c46aae4cb6aed09e98615c427fcc4f1de104 The DBx500 and ABx500 should be getting their IRQs from the device tree and nowhere else. Get rid of all the static assignments everywhere, delete it from the driver, platform data and the board files in one swift strike. Lots of cross-dependencies in the MFD drivers for PRCMU and AB8500 makes it necessary to strike everywhere at once to eradicate IRQs passed as resources and platform data to the left and right around the platform. Cc: Mark Brown <broonie@kernel.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The DBx500 and ABx500 should be getting their IRQs from the
device tree and nowhere else. Get rid of all the static assignments
everywhere, delete it from the driver, platform data and the
board files in one swift strike.

Lots of cross-dependencies in the MFD drivers for PRCMU and
AB8500 makes it necessary to strike everywhere at once to
eradicate IRQs passed as resources and platform data to the left
and right around the platform.

Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file 2013-09-26T09:04:12+00:00 Lee Jones lee.jones@linaro.org 2013-06-06T10:50:47+00:00 67f13daadccebf95c04f73db7b78cead844540bd These are required to request DBx500 PRCMU clocks from Device Tree. The numbers used are taken directly from the Hardware Specification document. We're moving them from the DBx500 PRCMU include file into the DT include directory and referencing them from the former via a #include. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
These are required to request DBx500 PRCMU clocks from Device Tree. The
numbers used are taken directly from the Hardware Specification document.
We're moving them from the DBx500 PRCMU include file into the DT include
directory and referencing them from the former via a #include.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mfd: dbx500-prcmu: Correctly reorder PRCMU clock identifiers 2013-09-26T09:04:06+00:00 Lee Jones lee.jones@linaro.org 2013-06-06T10:57:27+00:00 b0f4fe1edf6abbc81500d661f730cebd653a838c ... as stipulated by the Hardware Specification document. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
... as stipulated by the Hardware Specification document.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mfd: db8500: Update BML clock register for db8580 2013-06-07T01:17:16+00:00 Philippe Begnic philippe.begnic@st.com 2013-05-27T12:41:31+00:00 54e300339cce6d4be665e6bbd736123dd0f15888 BML clock register address in DB8580 has changed.Defined a new address under different name for DB8580. Signed-off-by: Philippe Begnic <philippe.begnic@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 
BML clock register address in DB8580 has changed.Defined a new address
under different name for DB8580.

Signed-off-by: Philippe Begnic <philippe.begnic@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>