linux-toradex.git/include/linux/mfd/max17135.h, branch jb4.3_1.0.0-ga Linux kernel for Apalis and Colibri modules ENGR00223348 EPDC: Unable to enable DISPLAY regulator 2012-10-15T08:26:56+00:00 Jack Lee jack.lee@freescale.com 2012-10-03T05:31:47+00:00 6337b9566e2370efc95b979b1b3716e88b821a35 In the maxim 17135 driver, the power good is confirmed by the power good GPIO polarity change when comparing the status at the beginning of driver probe and display regulator enabled. However, it is not reliable since the initial value of the GPIO is not constant. Normally, it is 1 but it can be 0 after system reset unexpectedly. Now, it is changed to POK bit checking in FAULT register. Signed-off-by: Jack Lee <jack.lee@freescale.com> 
In the maxim 17135 driver, the power good is confirmed by the
power good GPIO polarity change when comparing the status at
the beginning of driver probe and display regulator enabled.
However, it is not reliable since the initial value of the GPIO
is not constant. Normally, it is 1 but it can be 0 after system reset
unexpectedly. Now, it is changed to POK bit checking in FAULT register.

Signed-off-by: Jack Lee <jack.lee@freescale.com>
ENGR00143921-1 - EPDC/MAX17135: Add controls for V3P3 regulator 2012-07-20T05:17:42+00:00 Danny Nold dannynold@freescale.com 2011-11-03T18:05:36+00:00 5afccd70dd903a0539f39e44aab8d9f666f90273 - Added V3P3 regulator to max17135 - Added calls to enable/disable V3P3 regulator from EPDC driver - Improved Kconfig detail for max17135 MFD and HWMON entries Signed-off-by: Danny Nold <dannynold@freescale.com> 
- Added V3P3 regulator to max17135
- Added calls to enable/disable V3P3 regulator from EPDC driver
- Improved Kconfig detail for max17135 MFD and HWMON entries

Signed-off-by: Danny Nold <dannynold@freescale.com>
ENGR00142950-2 - MAX17135 EPD PMIC: Ported to 2.6.38 kernel 2012-07-20T05:13:44+00:00 Danny Nold dannynold@freescale.com 2011-05-03T17:58:07+00:00 8adab5acb3c8295e76f6e18a3834fc1e9ca38424 - Ported MAX17135 MFD core driver to 2.6.38 - Ported MAX17135 HWMON temperature sensor driver to 2.6.38 - Ported MAX17135 regulator driver to 2.6.38 Signed-off-by: Danny Nold <dannynold@freescale.com> 
- Ported MAX17135 MFD core driver to 2.6.38
- Ported MAX17135 HWMON temperature sensor driver to 2.6.38
- Ported MAX17135 regulator driver to 2.6.38

Signed-off-by: Danny Nold <dannynold@freescale.com>