We can't forward declare enums.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Clean up interrupts on exit, silencing a sparse warning caused by
tps65912_irq_exit() being defined but not prototyped as we go.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Currently driver sets the irq type to IRQF_TRIGGER_LOW which is
causing interrupt registration failure in ARM based SoCs as:
[    0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0)
[    0.208513] dummy 0-0059: Failed to request IRQ 118: -22

Provide the irq flags through platform data if device is registered
through board file or get the irq type from DT node property in place
of hardcoding the irq flag in driver to support multiple platforms.

Also configure the device to generate the interrupt signal according to
flag type.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
dri= ver and current sinks.  This patch enables LP8788 backlight module.

(Brightness mode)
The brightness is controlled by PWM input or I2C register.
All modes are supported in the driver.

(Platform data)
Configurable data can be defined in the platform side.
 name                  : backlight driver name. (default: "lcd-backlight")
 initial_brightness    : initial value of backlight brightness
 bl_mode               : brightness control by PWM or lp8788 register
 dim_mode              : dimming mode selection
 full_scale            : full scale current setting
 rise_time             : brightness ramp up step time
 fall_time             : brightness ramp down step time
 pwm_pol               : PWM polarity setting when bl_mode is PWM based
 period_ns             : platform specific PWM period value. unit is nano.

The default values are set in case no platform data is defined.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: "devendra.aaru" <devendra.aaru@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...

The tmio_mmc_cd_wakeup() inline function has been deprecated since 3.4 and
is unused since 3.4 too. Remove them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...

Pull sound updates from Takashi Iwai:
 "The biggest change in this update is the unification of HD-audio codec
  parsers.  Now the HD-audio codec is parsed in a generic parser code
  which is invoked by each HD-audio codec driver.

  Some background information is found in David Henningsson's blog
  entry:

      http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/

  Other than that, some random updates/fixes like USB-audio and a bunch
  of small AoC updates as usual.

  Highlights:

   - Unification of HD-audio parser code (aka generic parser)

   - Support of new Intel HD-audio controller, new IDT codecs

   - Fixes for HD-audio HDMI audio hotplug

   - Haswell HDMI audio fixup

   - Support of Creative CA0132 DSP code

   - A few fixes of HDSP driver

   - USB-audio fix for Roland A-PRO, M-Audio FT C600

   - Support PM for aloop driver (and fixes Oops)

   - Compress API updates for gapless playback support

  For ASoC part:

   - Support for a wider range of hardware in the compressed stream code

   - The ability to mute capture streams as well as playback streams
     while inactive

   - DT support for AK4642, FSI, Samsung I2S and WM8962

   - AC'97 support for Tegra

   - New driver for max98090, replacing the stub which was there

   - A new driver from Dialog

  Note that due to dependencies, DTification of DMA support for Samsung
  platforms (used only by the and I2S driver and SPI) is merged here as
  well."

Fix up trivial conflict in drivers/spi/spi-s3c64xx.c due to removed code
being changed.

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (453 commits)
  ALSA: usb: Fix Processing Unit Descriptor parsers
  ALSA: hda - hdmi: Notify userspace when ELD control changes
  ALSA: hda - hdmi: Protect ELD buffer
  ALSA: hda - hdmi: Refactor hdmi_eld into parsed_hdmi_eld
  ALSA: hda - hdmi: Do not expose eld data when eld is invalid
  ALSA: hda - hdmi: ELD shouldn't be valid after unplug
  ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop
  ALSA: hda - add quirks for mute LED on two HP machines
  ALSA: usb/quirks, fix out-of-bounds access
  ASoC: codecs: Add da7213 codec
  ALSA: au88x0 - Define channel map for au88x0
  ALSA: compress: add support for gapless playback
  ALSA: hda - Remove speaker clicks on CX20549
  ALSA: hda - Disable runtime PM for Intel 5 Series/3400
  ALSA: hda - Increase badness for missing multi-io
  ASoC: arizona: Automatically manage input mutes
  ALSA: hda - Fix broken workaround for HDMI/SPDIF conflicts
  ALSA: hda/ca0132 - Add missing \n to debug prints
  ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESS
  ALSA: hda - update documentation for no-primary-hp fixup
  ...