linux-toradex.git/include/linux/mfd, branch v4.13-rc4

Merge tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

2017-07-11T16:55:47+00:00

Pull chrome platform updates from Benson Leung:
 "Changes in this pull request are around catching up cros_ec with the
  internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and
  cros_ec_lightbar.

  Also, switching maintainership from olof to bleung"

* tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome : Add myself as Maintainer
  platform/chrome: cros_ec_lightbar - hide unused PM functions
  cros_ec: Don't signal wake event for non-wake host events
  cros_ec: Fix deadlock when EC is not responsive at probe
  cros_ec: Don't return error when checking command version
  platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend
  platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC
  platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence
  platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
  platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI
  platform/chrome: cros_ec_lpc: Add power management ops
  platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device
  platform/chrome: cros_ec_lpc: Add support for mec1322 EC
  platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants
  mfd: cros_ec: Add support for dumping panic information
  cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer()
  mfd: cros_ec: add debugfs, console log file
  mfd: cros_ec: Add EC console read structures definitions
  mfd: cros_ec: Add helper for event notifier.

Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2017-07-07T20:30:05+00:00

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...

mfd: Add LP87565 PMIC support

2017-07-06T07:29:13+00:00

The LP87565 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

        - Configurable Bucks(Single and multi-phase).
        - Configurable General Purpose Output Signals (GPO).

The LP87565-Q1 variant device uses two 2-phase outputs configuration,
Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
output.

Signed-off-by: Keerthy 
Acked-by: Rob Herring 
Signed-off-by: Lee Jones

mfd: rtsx: Do retry when DMA transfer error

2017-07-06T07:29:11+00:00

The request should be resent when DMA transfer error occurred.
For rts5227, the clock rate needs to be reduced when error occurred.

Signed-off-by: Steven Feng 
Signed-off-by: Lee Jones

Merge tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2017-07-04T18:55:21+00:00

Pull regulator updates from Mark Brown:
 "A quiet release for the regulator API, a series of fairly small fixes
  plus one new feature and a few new drivers:

   - Support for regulators with different settling times for rising and
     falling voltage changes.

   - New drivers for Allwinner AXP803, HiSilicon HI6421V530 and TI
     LP87565"

* tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
  regulator: core: Fix size limit of supply_map
  regulator: core: Fix voltage change propagations to supply regulators
  regulator: lp87565: Fix the initial voltage range
  regulator: tps65910: wire up sleep control configuration
  regulator: hi6421v530: Describe consumed platform device
  regulator: tps65910: check TPS65910_NUM_REGS at build time
  regulator: core: Prioritise consumer mappings over regulator name
  regulator: lp87565: Fix the GPL header
  regulator: hi6421: Describe consumed platform device
  regulator: hi6421v530: add driver for hi6421v530 voltage regulator
  regulator: da9061: BUCK and LDO regulator driver
  regulator: bd9571mwv: Statize local symbols
  regulator: tps65917: Add support for SMPS12
  regulator: lp87565: Add support for lp87565 PMIC regulators
  regulator: axp20x-regulator: add support for AXP803
  regulator: lp8755: fix spelling mistake "acceess" -> "access"
  regulator: Allow for asymmetric settling times
  regulator: DT: Add properties for asymmetric settling times
  regulator: palmas: Drop unnecessary static
  MAINTAINERS: Update MAX77802 PMIC entry
  ...

Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2017-07-04T18:11:56+00:00

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support to enable irq wake for slot gpio
   - Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour
   - Improve R1 response error checks for stop commands
   - Cleanup and clarify some MMC specific code
   - Keep card runtime resumed while adding SDIO function devices
   - Use device_property_read instead of of_property_read in mmc_of_parse()
   - Move boot partition locking into a driver op to enable proper I/O scheduling
   - Move multi/single-ioctl() to use block layer to enable proper I/O scheduling
   - Delete bounce buffer Kconfig option
   - Improve the eMMC HW reset support provided via the eMMC pwrseq
   - Add host API to manage SDIO IRQs from a workqueue

  MMC host:
   - dw_mmc: Drop support for multiple slots
   - dw_mmc: Use device_property_read instead of of_property_read
   - dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time
   - dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards
   - dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs
   - omap_hsmmc: Convert to mmc regulator APIs to consolidate code
   - omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead
   - tmio: make sure SDIO gets reinitialized after resume
   - sdhi: add CMD23 support to R-Car Gen2 & Gen3
   - tmio: add CMD23 support
   - sdhi/tmio: Refactor code and rename files to simplify Kconfig options
   - sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
   - sdhci-pci: Add support for Intel CNP
   - sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers
   - sdhci-esdhc-imx: Allow all supported prescaler values
   - sdhci-esdhc-imx: Fix DAT line software reset
   - sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR
   - atmel-mci: Drop AVR32 support"

* tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: dw_mmc: remove the unnecessary slot variable
  mmc: dw_mmc: use the 'slot' instead of 'cur_slot'
  mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot
  mmc: dw_mmc: change the array of slots
  mmc: dw_mmc: remove the loop about finding slots
  mmc: dw_mmc: deprecated the "num-slots" property
  mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT
  dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases
  mmc: renesas-sdhi: improve checkpatch cleanness
  mmc: tmio: improve checkpatch cleanness
  mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
  mmc: slot-gpio: Add support to enable irq wake on cd_irq
  mmc: core: Remove MMC_CAP2_HC_ERASE_SZ
  mmc: core: for data errors, take response of stop cmd into account
  mmc: core: check also R1 response for stop commands
  mmc: core: Clarify code for sending CSD
  mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead
  mmc: core: Re-factor code for sending CID
  mmc: core: Remove redundant code in mmc_send_cid()
  mmc: core: Make mmc_can_reset() static
  ...

Merge remote-tracking branches 'regulator/topic/settle', 'regulator/topic/tps65910' and 'regulator/topic/tps65917' into regulator-next

2017-07-03T15:52:21+00:00

cros_ec: Don't signal wake event for non-wake host events

2017-06-27T16:19:15+00:00

The subset of wake-enabled host events is defined by the EC, but the EC
may still send non-wake host events if we're in the process of
suspending. Get the mask of wake-enabled host events from the EC and
filter out non-wake events to prevent spurious aborted suspend
attempts.

Signed-off-by: Shawn Nematbakhsh 
Signed-off-by: Thierry Escande 
Acked-for-MFD-by: Lee Jones 
Signed-off-by: Benson Leung

platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence

2017-06-23T23:12:18+00:00

Don't let EC control suspend/resume sequence. If the EC controls the
lightbar and sets the sequence when it notices the chipset transitioning
between states, we can't make exceptions for cases where we don't want
to activate the lightbar. Instead, let's move the suspend/resume
notifications into the kernel so we can selectively play the sequences.

Signed-off-by: Eric Caruso 
Signed-off-by: Guenter Roeck 
Signed-off-by: Enric Balletbo i Serra 
Acked-by: Lee Jones 
Signed-off-by: Benson Leung

platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs

2017-06-23T23:12:17+00:00

Add a program feature so we can upload and run programs for lightbar
sequences. We should be able to use this to shift sequences out of the
EC and save space there.

  $ cat  > /sys/devices/.../cros_ec/program
  $ echo program > /sys/devices/.../cros_ec/sequence

Signed-off-by: Eric Caruso 
Signed-off-by: Guenter Roeck 
Signed-off-by: Enric Balletbo i Serra 
Acked-by: Lee Jones 
Signed-off-by: Benson Leung