Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Continue to refactor the mmc block code to prepare for blkmq
   - Move mmc block debugfs into block module
   - Next step for eMMC CMDQ by adding a new mmc host interface for it
   - Move Kconfig option MMC_DEBUG from core to host
   - Some additional minor improvements

  MMC host:
   - Declare structs as const when applicable
   - Explicitly request exclusive reset control when applicable
   - Improve some error paths and other various cleanups
   - sdhci: Preparations to support SDHCI OMAP
   - sdhci: Improve some PM related code
   - sdhci: Re-factoring and modernizations
   - sdhci-xenon: Add runtime PM and system sleep support
   - sdhci-xenon: Add support for eMMC HS400 Enhanced Strobe
   - sdhci-cadence: Add system sleep support
   - sdhci-of-at91: Improve system sleep support
   - dw_mmc: Add support for Hisilicon hi3660
   - sunxi: Add support for A83T eMMC
   - sunxi: Add support for DDR52 mode
   - meson-gx: Add support for UHS-I SD-cards
   - meson-gx: Cleanups and improvements
   - tmio: Fix CMD12 (STOP) handling
   - tmio: Cleanups and improvements
   - renesas_sdhi: Add r8a7743/5 support
   - renesas-sdhi: Add support for R-Car Gen3 SDHI DMAC
   - renesas_sdhi: Cleanups and improvements"

* tag 'mmc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits)
  mmc: renesas_sdhi: Add r8a7743/5 support
  mmc: meson-gx: fix __ffsdi2 undefined on arm32
  mmc: sdhci-xenon: add runtime pm support and reimplement standby
  mmc: core: Move mmc_start_areq() declaration
  mmc: mmci: stop building qcom dml as module
  mmc: sunxi: Reset the device at probe time
  clk: sunxi-ng: Provide a default reset hook
  mmc: meson-gx: rework tuning function
  mmc: meson-gx: change default tx phase
  mmc: meson-gx: implement voltage switch callback
  mmc: meson-gx: use CCF to handle the clock phases
  mmc: meson-gx: implement card_busy callback
  mmc: meson-gx: simplify interrupt handler
  mmc: meson-gx: work around clk-stop issue
  mmc: meson-gx: fix dual data rate mode frequencies
  mmc: meson-gx: rework clock init function
  mmc: meson-gx: rework clk_set function
  mmc: meson-gx: rework set_ios function
  mmc: meson-gx: cfg init overwrite values
  mmc: meson-gx: initialize sane clk default before clock register
  ...

Pull regulator updates from Mark Brown:
 "This is an extremely quiet release for the regulator subsystem, it's
  all fairly minor fixes and cleanups plus a few new drivers and ddevice
  ID additions:

   - Support for MediaTek MT6380, Ricoh RC5T619 and ST Voltage Reference
     Buffers"

* tag 'regulator-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
  regulator: Add support for stm32-vrefbuf
  regulator: Add STM32 Voltage Reference Buffer
  regulator: pv88090: Exception handling for out of bounds
  regulator: da9063: Return an error code on probe failure
  regulator: rn5t618: add RC5T619 PMIC support
  regulator: ltc3589: constify i2c_device_id
  regulator: fan53555: fix I2C device ids
  regulator: add fixes with MT6397 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6323 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6311 dt-bindings shouldn't reference driver
  regulator: Add document for MediaTek MT6380 regulator
  regulator: mt6380: Add support for MT6380
  regulator: pwm-regulator: Remove unneeded gpiod NULL check
  regulator: core: fix a possible race in disable_work handling
  regulator: fan53555: Use of_device_get_match_data() to simplify probe
  regulator: of: regulator_of_get_init_data() missing of_node_get()
  regulator: pwm-regulator: fix example syntax
  regulator: Convert to using %pOF instead of full_name
  regulator: cpcap: Add OF mode mapping
  regulator: cpcap: Fix standby mode
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...

The TPS68470 device is an advanced power management
unit that powers a Compact Camera Module (CCM),
generates clocks for image sensors, drives a dual
LED for Flash and incorporates two LED drivers for
general purpose indicators.

This patch adds support for TPS68470 mfd device.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.

Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The X-Powers AXP813 PMIC is normally used with Allwinner's A83T SoC.
It has the same range of functions as other X-Powers PMICs, such as
DC-DC buck converter and linear regulator outputs, AC-IN and VBUS
power supplies, power button trigger, GPIOs, ADCs, and a battery
charger.

Note that the IRQ table given in the datasheet is incorrect: in IRQ
enable/status registers 1, there are separate IRQs for ACIN and VBUS,
instead of bits [7:5] being the same as bits [4:2]. So it shares the
same IRQs as the AXP803, rather than the AXP288.

This patch adds basic mfd support for it, with only the power button
enabled.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS
entry. The MFD part only specifies the regmap bits for the PMIC and
binds the subdevs together.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with
main SoC via memory-mapped I/O.

Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon,
but at different revisions. They share the same memory-mapped I/O
design. They differ in integrated devices, such as regulator details,
LDO voltage points.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>