linux-toradex.git/include/linux/mlx4/cmd.h, branch tegra-10.9.9 Linux kernel for Apalis and Colibri modules mlx4_core: Add link type autosensing 2009-03-19T02:45:11+00:00 Yevgeny Petrilin yevgenyp@mellanox.co.il 2009-03-19T02:45:11+00:00 27bf91d6a0d5a9c7224e8687754249bba67dd4cf When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> 
When a port's link is down (except to driver restart) and the port is
configured for auto sensing, we try to sense port link type (Ethernet
or InfiniBand) in order to determine how to initialize the port.  If
the port type needs to be changed, all mlx4 for the device interfaces
are unregistered and then registered again with the new port
types.  Sensing is done with intervals of 3 seconds.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
mlx4_core: Ethernet MAC/VLAN management 2008-10-22T18:44:46+00:00 Yevgeny Petrilin yevgenyp@mellanox.co.il 2008-10-22T18:44:46+00:00 2a2336f8228292b8197f4187e54b0748903e6645 Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> 
Add support for managing MAC and VLAN filters for each port.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
IB/mlx4: Add support for modifying CQ moderation parameters 2008-04-17T04:09:33+00:00 Eli Cohen eli@dev.mellanox.co.il 2008-04-17T04:09:33+00:00 3fdcb97f0b8d8a29117dc36acd0b15965d2a2160 Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> 
Signed-off-by: Eli Cohen <eli@mellnaox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
IB/mlx4: Handle FW command interface rev 3 2007-06-18T15:15:02+00:00 Roland Dreier rolandd@cisco.com 2007-06-18T15:15:02+00:00 5ae2a7a836be660ff1621cce1c46930f19200589 Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com> 
Upcoming firmware introduces command interface revision 3, which
changes the way port capabilities are queried and set.  Update the
driver to handle both the new and old command interfaces by adding a
new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware
interface revision and then using the correct interface based on the
setting of the flag.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters 2007-05-09T01:00:38+00:00 Roland Dreier rolandd@cisco.com 2007-05-09T01:00:38+00:00 225c7b1feef1b41170f7037a5b10a65cd8a42c54 Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com> 
Add an InfiniBand driver for Mellanox ConnectX adapters.  Because
these adapters can also be used as ethernet NICs and Fibre Channel 
HBAs, the driver is split into two modules: 
 
  mlx4_core: Handles low-level things like device initialization and 
    processing firmware commands.  Also controls resource allocation 
    so that the InfiniBand, ethernet and FC functions can share a 
    device without stepping on each other. 
 
  mlx4_ib: Handles InfiniBand-specific things; plugs into the 
    InfiniBand midlayer. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>