linux-toradex.git/include/linux/mlx4, branch v4.11-rc3

net/mlx4: && vs & typo

2017-03-01T17:50:58+00:00

Bitwise & was obviously intended here.

Fixes: 745d8ae4622c ("net/mlx4: Spoofcheck and zero MAC can't coexist")
Signed-off-by: Dan Carpenter 
Reviewed-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4: Spoofcheck and zero MAC can't coexist

2017-02-23T15:57:56+00:00

Spoofcheck can't be enabled if VF MAC is zero.
Vice versa, can't zero MAC if spoofcheck is on.

Fixes: 8f7ba3ca12f6 ('net/mlx4: Add set VF mac address support')
Signed-off-by: Eugenia Emantayev 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4_en: Pass user MTU value to Firmware at set port command

2017-01-30T20:26:43+00:00

When starting the port, driver will inform Firmware about the actual MTU
which does not include implicit headers, such as FCS or VLAN tags.

Signed-off-by: Shaker Daibes 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4_en: Adding support of turning off link autonegotiation via ethtool

2017-01-30T20:26:42+00:00

This feature will allow the user to disable auto negotiation
on the port for mlx4 devices while setting the speed is limited
to 1GbE speeds.
Other speeds will not be accepted in autoneg off mode.

This functionality is permitted providing that the firmware
is compatible with this feature.
The above is determined by querying a new dedicated capability
bit in the device.

Signed-off-by: Ariel Levkovich 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

net/mlx4_core: Fix raw qp flow steering rules under SRIOV

2016-12-29T19:17:40+00:00

Demoting simple flow steering rule priority (for DPDK) was achieved by
wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF
as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper
function for the PF and all VFs.

In function mlx4_ib_create_flow(), this change caused the main rule
creation for the PF to be wrapped, while it left the associated
tunnel steering rule creation unwrapped for the PF.

This mismatch caused rule deletion failures in mlx4_ib_destroy_flow()
for the PF when the detach wrapper function did not find the associated
tunnel-steering rule (since creation of that rule for the PF did not
go through the wrapper function).

Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native"
(so that the PF invocation does not go through the wrapper), and perform
the required priority demotion for the PF in the mlx4_ib_create_flow()
code path.

Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12+00:00

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: John Stultz

Revert "net/mlx4_en: Avoid unregister_netdev at shutdown flow"

2016-11-28T20:33:46+00:00

This reverts commit 9d76931180557270796f9631e2c79b9c7bb3c9fb.

Using unregister_netdev at shutdown flow prevents calling
the netdev's ndos or trying to access its freed resources.

This fixes crashes like the following:
 Call Trace:
  [] dev_get_phys_port_id+0x1e/0x30
  [] rtnl_fill_ifinfo+0x4be/0xff0
  [] rtmsg_ifinfo_build_skb+0x73/0xe0
  [] rtmsg_ifinfo.part.27+0x16/0x50
  [] rtmsg_ifinfo+0x18/0x20
  [] netdev_state_change+0x46/0x50
  [] linkwatch_do_dev+0x38/0x50
  [] __linkwatch_run_queue+0xf5/0x170
  [] linkwatch_event+0x25/0x30
  [] process_one_work+0x152/0x400
  [] worker_thread+0x125/0x4b0
  [] ? rescuer_thread+0x350/0x350
  [] kthread+0xca/0xe0
  [] ? kthread_park+0x60/0x60
  [] ret_from_fork+0x25/0x30

Fixes: 9d7693118055 ("net/mlx4_en: Avoid unregister_netdev at shutdown flow")
Signed-off-by: Tariq Toukan 
Reported-by: Sebastian Ott 
Reported-by: Steve Wise 
Cc: Jiri Pirko 
Signed-off-by: David S. Miller

net/mlx4: Fix firmware command timeout during interrupt test

2016-10-29T20:23:48+00:00

Currently interrupt test that is part of ethtool selftest runs the
check over all interrupt vectors of the device.
In mlx4_en package part of interrupt vectors are uninitialized since
mlx4_ib doesn't exist. This causes NOP FW command to time out.
Change logic to test current port interrupt vectors only.

Signed-off-by: Eugenia Emantayev 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2016-10-10T00:04:33+00:00

Pull main rdma updates from Doug Ledford:
 "This is the main pull request for the rdma stack this release.  The
  code has been through 0day and I had it tagged for linux-next testing
  for a couple days.

  Summary:

   - updates to mlx5

   - updates to mlx4 (two conflicts, both minor and easily resolved)

   - updates to iw_cxgb4 (one conflict, not so obvious to resolve,
     proper resolution is to keep the code in cxgb4_main.c as it is in
     Linus' tree as attach_uld was refactored and moved into
     cxgb4_uld.c)

   - improvements to uAPI (moved vendor specific API elements to uAPI
     area)

   - add hns-roce driver and hns and hns-roce ACPI reset support

   - conversion of all rdma code away from deprecated
     create_singlethread_workqueue

   - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
     staging)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits)
  staging/lustre: Disable InfiniBand support
  iw_cxgb4: add fast-path for small REG_MR operations
  cxgb4: advertise support for FR_NSMR_TPTE_WR
  IB/core: correctly handle rdma_rw_init_mrs() failure
  IB/srp: Fix infinite loop when FMR sg[0].offset != 0
  IB/srp: Remove an unused argument
  IB/core: Improve ib_map_mr_sg() documentation
  IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
  IB/mthca: Move user vendor structures
  IB/nes: Move user vendor structures
  IB/ocrdma: Move user vendor structures
  IB/mlx4: Move user vendor structures
  IB/cxgb4: Move user vendor structures
  IB/cxgb3: Move user vendor structures
  IB/mlx5: Move and decouple user vendor structures
  IB/{core,hw}: Add constant for node_desc
  ipoib: Make ipoib_warn ratelimited
  IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue
  IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue
  IB/ipoib: Remove deprecated create_singlethread_workqueue
  ...

IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets

2016-10-07T20:54:38+00:00

In MLX qp packets, the LRH (built by the driver) has both a VL field
and an SL field. When building a QP1 packet, the VL field should
reflect the SLtoVL mapping and not arbitrarily contain zero (as is
done now). This bug causes credit problems in IB switches at
high rates of QP1 packets.

The fix is to cache the SL to VL mapping in the driver, and look up
the VL mapped to the SL provided in the send request when sending
QP1 packets.

For FW versions which support generating a port_management_config_change
event with subtype sl-to-vl-table-change, the driver uses that event
to update its sl-to-vl mapping cache.  Otherwise, the driver snoops
incoming SMP mads to update the cache.

There remains the case where the FW is running in secure-host mode
(so no QP0 packets are delivered to the driver), and the FW does not
generate the sl2vl mapping change event. To support this case, the
driver updates (via querying the FW) its sl2vl mapping cache when
running in secure-host mode when it receives either a Port Up event
or a client-reregister event (where the port is still up, but there
may have been an opensm failover).
OpenSM modifies the sl2vl mapping before Port Up and Client-reregister
events occur, so if there is a mapping change the driver's cache will
be properly updated.

Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford