linux-toradex.git/include/linux/mm.h, branch v3.9-rc3

Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

2013-03-03T20:06:09+00:00

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...

mm: define VM_GROWSUP for CONFIG_METAG

2013-03-02T20:09:53+00:00

Commit cc2383ec06be093789469852e1fe96e1148e9a2c ("mm: introduce
arch-specific vma flag VM_ARCH_1") merged in v3.7-rc1.

The above commit combined several arch-specific vma flags into one, and
in the process it changed the VM_GROWSUP definition to depend on
specific architectures rather than CONFIG_STACK_GROWSUP. Therefore add
an ifdef for CONFIG_METAG to also set VM_GROWSUP.

Signed-off-by: James Hogan 
Cc: Konstantin Khlebnikov 
Cc: Andrew Morton 
Cc: Mel Gorman 
Cc: Michel Lespinasse 
Cc: Al Viro 
Cc: linux-mm@kvack.org

x86, ACPI, mm: Revert movablemem_map support

2013-03-02T17:34:39+00:00

Tim found:

  WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
  Hardware name: S2600CP
  sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
  smpboot: Booting Node   1, Processors  #1
  Modules linked in:
  Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
  Call Trace:
    set_cpu_sibling_map+0x279/0x449
    start_secondary+0x11d/0x1e5

Don Morris reproduced on a HP z620 workstation, and bisected it to
commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")

It turns out movable_map has some problems, and it breaks several things

1. numa_init is called several times, NOT just for srat. so those
	nodes_clear(numa_nodes_parsed)
	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
   can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
   and make fall back path working.

2. simply split acpi_numa_init to early_parse_srat.
   a. that early_parse_srat is NOT called for ia64, so you break ia64.
   b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
	     set_apicid_to_node(i, NUMA_NO_NODE)
     still left in numa_init. So it will just clear result from early_parse_srat.
     it should be moved before that....
   c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
       early before override from INITRD is settled.

3. that patch TITLE is total misleading, there is NO x86 in the title,
   but it changes critical x86 code. It caused x86 guys did not
   pay attention to find the problem early. Those patches really should
   be routed via tip/x86/mm.

4. after that commit, following range can not use movable ram:
  a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
  b. initrd... it will be freed after booting, so it could be on movable...
  c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
	anymore.
  d. init_mem_mapping: can not put page table high anymore.
  e. initmem_init: vmemmap can not be high local node anymore. That is
     not good.

If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.

We have workaround patch that could fix some problems, but some can not
be fixed.

So just remove that offending commit and related ones including:

 f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
    protect movablecore_map in memblock_overlaps_region().")

 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from
    SRAT")

 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to
    the end of node")

 e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is
    ready")

 fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map")

 42f47e27e761 ("page_alloc: make movablemem_map have higher priority")

 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep
    movable limit for nodes")

 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter")

 4d59a75125d5 ("x86: get pg_data_t's memory from other node")

Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0.  Also
need to find way to put other kernel used ram to local node ram.

Reported-by: Tim Gardner 
Reported-by: Don Morris 
Bisected-by: Don Morris 
Tested-by: Don Morris 
Signed-off-by: Yinghai Lu 
Cc: Tony Luck 
Cc: Thomas Renninger 
Cc: Tejun Heo 
Cc: Tang Chen 
Cc: Yasuaki Ishimatsu 
Signed-off-by: Linus Torvalds

mm,ksm: FOLL_MIGRATION do migration_entry_wait

2013-02-24T01:50:23+00:00

In "ksm: remove old stable nodes more thoroughly" I said that I'd never
seen its WARN_ON_ONCE(page_mapped(page)).  True at the time of writing,
but it soon appeared once I tried fuller tests on the whole series.

It turned out to be due to the KSM page migration itself: unmerge_and_
remove_all_rmap_items() failed to locate and replace all the KSM pages,
because of that hiatus in page migration when old pte has been replaced
by migration entry, but not yet by new pte.  follow_page() finds no page
at that instant, but a KSM page reappears shortly after, without a
fault.

Add FOLL_MIGRATION flag, so follow_page() can do migration_entry_wait()
for KSM's break_cow().  I'd have preferred to avoid another flag, and do
it every time, in case someone else makes the same easy mistake; but did
not find another transgressor (the common get_user_pages() is of course
safe), and cannot be sure that every follow_page() caller is prepared to
sleep - ia64's xencomm_vtop()? Now, THP's wait_split_huge_page() can
already sleep there, since anon_vma locking was changed to mutex, but
maybe that's somehow excluded.

Signed-off-by: Hugh Dickins 
Cc: Mel Gorman 
Cc: Petr Holasek 
Cc: Andrea Arcangeli 
Cc: Izik Eidus 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: accelerate mm_populate() treatment of THP pages

2013-02-24T01:50:23+00:00

This change adds a follow_page_mask function which is equivalent to
follow_page, but with an extra page_mask argument.

follow_page_mask sets *page_mask to HPAGE_PMD_NR - 1 when it encounters
a THP page, and to 0 in other cases.

__get_user_pages() makes use of this in order to accelerate populating
THP ranges - that is, when both the pages and vmas arrays are NULL, we
don't need to iterate HPAGE_PMD_NR times to cover a single THP page (and
we also avoid taking mm->page_table_lock that many times).

Signed-off-by: Michel Lespinasse 
Cc: Andrea Arcangeli 
Cc: Rik van Riel 
Cc: Mel Gorman 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: use long type for page counts in mm_populate() and get_user_pages()

2013-02-24T01:50:22+00:00

Use long type for page counts in mm_populate() so as to avoid integer
overflow when running the following test code:

int main(void) {
  void *p = mmap(NULL, 0x100000000000, PROT_READ,
                 MAP_PRIVATE | MAP_ANON, -1, 0);
  printf("p: %p\n", p);
  mlockall(MCL_CURRENT);
  printf("done\n");
  return 0;
}

Signed-off-by: Michel Lespinasse 
Cc: Andrea Arcangeli 
Cc: Rik van Riel 
Cc: Mel Gorman 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: add SECTION_IN_PAGE_FLAGS

2013-02-24T01:50:20+00:00

Instead of directly utilizing a combination of config options to determine
this, add a macro to specifically address it.

Signed-off-by: Cody P Schafer 
Cc: David Hansen 
Cc: Catalin Marinas 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: rename page struct field helpers

2013-02-24T01:50:18+00:00

The function names page_xchg_last_nid(), page_last_nid() and
reset_page_last_nid() were judged to be inconsistent so rename them to a
struct_field_op style pattern.  As it looked jarring to have
reset_page_mapcount() and page_nid_reset_last() beside each other in
memmap_init_zone(), this patch also renames reset_page_mapcount() to
page_mapcount_reset().  There are others like init_page_count() but as
it is used throughout the arch code a rename would likely cause more
conflicts than it is worth.

[akpm@linux-foundation.org: fix zcache]
Signed-off-by: Mel Gorman 
Suggested-by: Andrew Morton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: uninline page_xchg_last_nid()

2013-02-24T01:50:18+00:00

Andrew Morton pointed out that page_xchg_last_nid() and
reset_page_last_nid() were "getting nuttily large" and asked that it be
investigated.

reset_page_last_nid() is on the page free path and it would be
unfortunate to make that path more expensive than it needs to be.  Due
to the internal use of page_xchg_last_nid() it is already too expensive
but fortunately, it should also be impossible for the page->flags to be
updated in parallel when we call reset_page_last_nid().  Instead of
unlining the function, it uses a simplier implementation that assumes no
parallel updates and should now be sufficiently short for inlining.

page_xchg_last_nid() is called in paths that are already quite expensive
(splitting huge page, fault handling, migration) and it is reasonable to
uninline.  There was not really a good place to place the function but
mm/mmzone.c was the closest fit IMO.

This patch saved 128 bytes of text in the vmlinux file for the kernel
configuration I used for testing automatic NUMA balancing.

Signed-off-by: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

page-writeback.c: subtract min_free_kbytes from dirtyable memory

2013-02-24T01:50:17+00:00

When calculating amount of dirtyable memory, min_free_kbytes should be
subtracted because it is not intended for dirty pages.

Addresses http://bugs.debian.org/695182

[akpm@linux-foundation.org: fix up min_free_kbytes extern declarations]
[akpm@linux-foundation.org: fix min() warning]
Signed-off-by: Paul Szabo 
Acked-by: Rik van Riel 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds