Supporting byte addressing mode cards with
EMBEDDED_MMC_START_OFFSET. Setting the card addressing
mode based on the access mode bit in OCR register.

Change-Id: Ib10543d7aa2b474e28c95bb24fff645236686689
Reviewed-on: http://git-master/r/2581
Tested-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-by: Gary King <gking@nvidia.com>

properly unpacks the boot sector extension in MMC 4.4 CID responses

enables platforms to specify a non-zero offset for the MBR and kernel-visible
file systems, for embedded systems which store proprietary data at the start
of the eMMC device.

Change-Id: Id58abaffddda7d7aeded8573f4aba6cc0c903a24

A card driver can now specify that the underlying bus should *not*
auto-resume with the rest of the system. This is useful for reducing resume
latency as well as saving power when the card driver is not using the
bus. In the future, we'll add support for manual suspend

Signed-off-by: San Mehat <san@google.com>

This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.

mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data

Signed-off-by: San Mehat <san@google.com>

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Especially with the PM framework, those are quite handy to have in driver
code too.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Normally writes to SDIO function 0 outside the vendor specific CCCR
registers are prohibited.

To support embedded devices that require writes to SDIO function 0 outside
this range (e.g.  TI WL127x embedded sdio wifi device),
MMC_QUIRK_LENIENT_FN0 is introduced.

A card quirks field is added to `struct mmc_card' to support non-standard
devices (e.g.  embedded sdio devices).

[akpm@linux-foundation.org: code in C, not cpp!]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support to disconnect the pull-up resistor on CD/DAT[3] (pin 1)
of the card. This may be desired on certain setups of boards,
controllers and embedded sdio devices which do not need the card's
pull-up. As a result, card detection is disabled and power is saved.

[akpm@linux-foundation.org: simplify sdio_disable_cd() a bit]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>