linux-toradex.git/include/linux/mmc, branch v3.3-rc2

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

2012-01-14T20:32:16+00:00

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999  BFCB D920 0E6C D1AD B8F1

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  module_param: check that bool parameters really are bool.
  intelfbdrv.c: bailearly is an int module_param
  paride/pcd: fix bool verbose module parameter.
  module_param: make bool parameters really bool (drivers & misc)
  module_param: make bool parameters really bool (arch)
  module_param: make bool parameters really bool (core code)
  kernel/async: remove redundant declaration.
  printk: fix unnecessary module_param_name.
  lirc_parallel: fix module parameter description.
  module_param: avoid bool abuse, add bint for special cases.
  module_param: check type correctness for module_param_array
  modpost: use linker section to generate table.
  modpost: use a table rather than a giant if/else statement.
  modules: sysfs - export: taint, coresize, initsize
  kernel/params: replace DEBUGP with pr_debug
  module: replace DEBUGP with pr_debug
  module: struct module_ref should contains long fields
  module: Fix performance regression on modules with large symbol tables
  module: Add comments describing how the "strmap" logic works

Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries.  The
ARM sa11x0 mcp bus needed to be converted to that too.

module_param: make bool parameters really bool (drivers & misc)

2012-01-12T23:02:20+00:00

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Rusty Russell

mmc: host: Adds support for eMMC 4.5 HS200 mode

2012-01-12T20:17:16+00:00

This patch adds support for the HS200 mode on the host side.
Also enables the tuning feature required when the HS200 mode
is selected.

Signed-off-by: Girish K S 
Signed-off-by: Chris Ball

mmc: core: HS200 mode support for eMMC 4.5

2012-01-12T20:17:15+00:00

This patch adds the support of the HS200 bus speed for eMMC 4.5 devices.
The eMMC 4.5 devices have support for 200MHz bus speed. The function
prototype of the tuning function is modified to handle the tuning
command number which is different in sd and mmc case.

Signed-off-by: Girish K S 
Signed-off-by: Philip Rakity 
Signed-off-by: Chris Ball

mmc: core: Add option to prevent eMMC sleep command

2012-01-12T04:58:48+00:00

Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use
of eMMC sleep/awake command.

This option can be used when your platform has a buggy
kernel crash dump software, which is supposed to store
the dump on the eMMC, but is not able to wake up the eMMC
from sleep state.

In particular, failures have been seen with u-boot; even if
it is fixed there, platforms will be slow to update their
bootloader binaries.

Signed-off-by: Ulf Hansson 
Reviewed-by: Hanumath Prasad 
Reviewed-by: Srinidhi Kasagar 
Acked-by: Subhash Jadavani 
Signed-off-by: Chris Ball

mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION

2012-01-12T04:58:47+00:00

Even if a driver provides separate card detection, an interrupt
is still needed to abort mmc requests that are in progress.
SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it.

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball

mmc: sdhci-pci: add platform data

2012-01-12T04:58:47+00:00

Add a means of getting platform data for the SDHCI PCI
devices.  The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball

mmc: add a generic GPIO card-detect helper

2012-01-12T04:58:45+00:00

This patch adds a primitive helper to support card hotplug detection on
platforms, where a GPIO, capable of producing interrupts, is used for
detection of card-insertion and -removal events.

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Chris Ball

mmc: add a card hotplug handler context

2012-01-12T04:58:45+00:00

SD/MMC controllers provide different card insertion and removal detection
methods. On some of them the controller itself issues an interrupt, on
others polling is used, on yet others auxiliary means are used for this
purpose, e.g., a GPIO IRQ. Further, on some systems one of those methods
can be chosen at driver probing time and configured in software. E.g., on
some systems the SD/MMC controller card hot-plug detection pin can be
configured either as a respective controller functions, or an IRQ-capable
GPIO. To support such flexible configurations a card hot-plug context
is added by this patch.

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Chris Ball

mmc: dw_mmc: Add more capabilities field

2012-01-12T04:58:44+00:00

This patch adds another capabilities field for MMC_CAPS2_XXX.

Signed-off-by: Seungwon Jeon 
Signed-off-by: Chris Ball