linux-toradex.git/include/linux/mtd, branch v3.17-rc4

mtd: nand: fix DocBook warnings on nand_sdr_timings doc

2014-08-19T18:55:38+00:00

Change the comment type (from /** to /*) to prevent DocBook from
complaining about missing description for nand_sdr_timings fields.

There is currently no need in documenting those fields because they are
fully described in the ONFI specification (which is pointed out in the
comment).

Signed-off-by: Boris BREZILLON 
Reported-by: Randy Dunlap 
Acked-by: Randy Dunlap 
Tested-by: Randy Dunlap 
Signed-off-by: Brian Norris

mtd: nand: add ONFI timing mode to nand_timings converter

2014-07-22T02:39:55+00:00

Add a converter to retrieve NAND timings from an ONFI NAND timing mode.
At the moment, only SDR NAND timings are supported.

Signed-off-by: Boris BREZILLON 
Signed-off-by: Brian Norris

mtd: nand: define struct nand_timings

2014-07-22T02:26:11+00:00

Define a struct containing the standard NAND timings as described in NAND
datasheets.

Signed-off-by: Boris BREZILLON 
Signed-off-by: Brian Norris

mtd: spi-nor: add support for flag status register on Micron chips

2014-07-12T02:10:35+00:00

Some new Micron flash chips require reading the flag status register to
determine when operations have completed.

Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also
require reading the status register before reading the flag status
register.

This patch adds support for the flag status register in the n25q512ax3
and n25q00 Micron QSPI flash chips.

Signed-off-by: Graham Moore 
Signed-off-by: Brian Norris

mtd: Introduce mtd_block_isreserved()

2014-07-09T01:38:16+00:00

In addition to mtd_block_isbad(), which checks if a block is bad or
reserved, it's needed to check if a block is reserved only (but not
bad). This commit adds an MTD interface for it, in a similar fashion to
mtd_block_isbad().

While here, fix mtd_block_isbad() so the out-of-bounds checking is done
before the callback check.

Signed-off-by: Ezequiel Garcia 
Tested-by: Pekon Gupta 
Signed-off-by: Brian Norris

Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd

2014-06-11T15:35:34+00:00

Pull MTD updates from Brian Norris:
 - refactor m25p80.c driver for use as a general SPI NOR framework for
   other drivers which may speak to SPI NOR flash without providing full
   SPI support (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used

* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
  mtd: gpmi: add gpmi support for imx6sx
  mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
  mtd: bf5xx_nand: use the managed version of kzalloc
  mtd: pxa3xx_nand: make the driver work on big-endian systems
  mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
  mtd: nand: r852: correct write_buf loop bounds
  mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
  mtd: nand_bbt: remove unused variable
  mtd: maps: sc520cdp: fix warnings
  mtd: slram: fix unused variable warning
  mtd: pfow: remove unused variable
  mtd: lpddr: fix Kconfig dependency, for I/O accessors
  mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
  mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
  mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
  mtd: nand: Warn the user if the selected ECC strength is too weak
  mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
  mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  ...

mtd: pfow: remove unused variable

2014-05-28T07:05:23+00:00

Fixes warning:

In file included from drivers/mtd/lpddr/qinfo_probe.c:31:0:
include/linux/mtd/pfow.h: In function ‘send_pfow_command’:
include/linux/mtd/pfow.h:104:6: warning: variable ‘chipnum’ set but not used [-Wunused-but-set-variable]
  int chipnum;
      ^

Signed-off-by: Brian Norris

mtd: nand: Add support to use nand_base poi databuf as bounce buffer

2014-05-20T23:35:32+00:00

nand_base can be passed a kmap()'d buffers from highmem by
filesystems like jffs2. This results in failure to map the
physical address of the DMA buffer on various contoller
driver on different platforms. This change adds a chip option
to use preallocated databuf as bounce buffers used in
nand_do_read_ops() and nand_do_write_ops().
This allows for specific nand controller driver to set this
option as needed.

Signed-off-by: Kamal Dasu 
Signed-off-by: Brian Norris

mtd: nand: refactor erase_cmd() to return chip status

2014-05-09T20:19:42+00:00

The nand_chip::erase_cmd callback previously served a dual purpose; for
one, it allowed a per-flash-chip override, so that AG-AND devices could
use a different erase command than other NAND. These AND devices were
dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand:
remove AG-AND support). On the other hand, some drivers (denali and
doc-g4) need to use this sort of callback to implement
controller-specific erase operations.

To make the latter operation easier for some drivers (e.g., ST's new BCH
NAND driver), it helps if the command dispatch and wait functions can be
lumped together, rather than called separately.

This patch does two things:
 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return
    the status from this callback
 2. Rename erase_cmd() to just erase(), since this callback does a
    little more than just send a command

Signed-off-by: Brian Norris 
Tested-by: Lee Jones

Shiraz has moved

2014-04-18T23:40:08+00:00

shiraz.hashim@st.com email-id doesn't exist anymore as he has left the
company.  Replace ST's id with shiraz.linux.kernel@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'.

Signed-off-by: Viresh Kumar 
Cc: Shiraz Hashim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds