As analyzed by Patrick McHardy, vlan needs to reset it's
netdev_ops pointer in it's ->init() function but this
leaves the compat method pointers stale.

Add a netdev_resync_ops() and call it from the vlan code.

Any other driver which changes ->netdev_ops after register_netdevice()
will need to call this new function after doing so too.

With help from Patrick McHardy.

Tested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds an init_dummy_netdev() function that gets a network device
structure (allocation and lifetime entirely under caller's control) and
initialize the minimum amount of fields so it can be used to schedule
NAPI polls without registering a full blown interface. This is to be
used by drivers that need to tie several hardware interfaces to a single
NAPI poll scheduler due to HW limitations.

It also updates the ibm_newemac driver to use that, this fixing the
oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add()

Symbol is exported GPL only a I don't think we want binary drivers doing
that sort of acrobatics (if we want them at all).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a comment in include/linux/netdevice.h.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (22 commits)
  ioat: fix self test for multi-channel case
  dmaengine: bump initcall level to arch_initcall
  dmaengine: advertise all channels on a device to dma_filter_fn
  dmaengine: use idr for registering dma device numbers
  dmaengine: add a release for dma class devices and dependent infrastructure
  ioat: do not perform removal actions at shutdown
  iop-adma: enable module removal
  iop-adma: kill debug BUG_ON
  iop-adma: let devm do its job, don't duplicate free
  dmaengine: kill enum dma_state_client
  dmaengine: remove 'bigref' infrastructure
  dmaengine: kill struct dma_client and supporting infrastructure
  dmaengine: replace dma_async_client_register with dmaengine_get
  atmel-mci: convert to dma_request_channel and down-level dma_slave
  dmatest: convert to dma_request_channel
  dmaengine: introduce dma_request_channel and private channels
  net_dma: convert to dma_find_channel
  dmaengine: provide a common 'issue_pending_all' implementation
  dmaengine: centralize channel allocation, introduce dma_find_channel
  dmaengine: up-level reference counting to the module level
  ...

Previously GRO's only entry point from the outside is through
napi_gro_receive and napi_gro_frags.  These interfaces are for
device drivers.

This patch rearranges things to provide a new set of interfaces
for VLANs.  These interfaces are for internal use only.  The
VLAN code itself can then provide a set of entry points for
device drivers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the general-purpose channel allocation provided by dmaengine.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

This patch allows GRO to merge page frags (skb_shinfo(skb)->frags)
in one skb, rather than using the less efficient frag_list.

It also adds a new interface, napi_gro_frags to allow drivers
to inject page frags directly into the stack without allocating
an skb.  This is intended to be the GRO equivalent for LRO's
lro_receive_frags interface.

The existing GSO interface can already handle page frags with
or without an appended frag_list so nothing needs to be changed
there.

The merging itself is rather simple.  We store any new frag entries
after the last existing entry, without checking whether the first
new entry can be merged with the last existing entry.  Making this
check would actually be easy but since no existing driver can
produce contiguous frags anyway it would just be mental masturbation.

If the total number of entries would exceed the capacity of a
single skb, we simply resort to using frag_list as we do now.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter.  This patch cleans up that api by
properly removing it..

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the top-level GRO (Generic Receive Offload) infrastructure.
This is pretty similar to LRO except that this is protocol-independent.
Instead of holding packets in an lro_mgr structure, they're now held in
napi_struct.

For drivers that intend to use this, they can set the NETIF_F_GRO bit and
call napi_gro_receive instead of netif_receive_skb or just call netif_rx.
The latter will call napi_receive_skb automatically.  When napi_gro_receive
is used, the driver must either call napi_complete/napi_rx_complete, or
call napi_gro_flush in softirq context if the driver uses the primitives
__napi_complete/__napi_rx_complete.

Protocols will set the gro_receive and gro_complete function pointers in
order to participate in this scheme.

In addition to the packet, gro_receive will get a list of currently held
packets.  Each packet in the list has a same_flow field which is non-zero
if it is a potential match for the new packet.  For each packet that may
match, they also have a flush field which is non-zero if the held packet
must not be merged with the new packet.

Once gro_receive has determined that the new skb matches a held packet,
the held packet may be processed immediately if the new skb cannot be
merged with it.  In this case gro_receive should return the pointer to
the existing skb in gro_list.  Otherwise the new skb should be merged into
the existing packet and NULL should be returned, unless the new skb makes
it impossible for any further merges to be made (e.g., FIN packet) where
the merged skb should be returned.

Whenever the skb is merged into an existing entry, the gro_receive
function should set NAPI_GRO_CB(skb)->same_flow.  Note that if an skb
merely matches an existing entry but can't be merged with it, then
this shouldn't be set.

If gro_receive finds it pointless to hold the new skb for future merging,
it should set NAPI_GRO_CB(skb)->flush.

Held packets will be flushed by napi_gro_flush which is called by
napi_complete and napi_rx_complete.

Currently held packets are stored in a singly liked list just like LRO.
The list is limited to a maximum of 8 entries.  In future, this may be
expanded to use a hash table to allow more flows to be held for merging.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows GSO to handle frag_list in a limited way for the
purposes of allowing packets merged by GRO to be refragmented on
output.

Most hardware won't (and aren't expected to) support handling GRO
frag_list packets directly.  Therefore we will perform GSO in
software for those cases.

However, for drivers that can support it (such as virtual NICs) we
may not have to segment the packets at all.

Whether the added overhead of GRO/GSO is worthwhile for bridges
and routers when weighed against the benefit of potentially
increasing the MTU within the host is still an open question.
However, for the case of host nodes this is undoubtedly a win.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>