The coretemp driver build fails when CONFIG_PCI is not enabled because it
uses a function that does not have a stub for that config case, so add the
function stub.

  ../drivers/hwmon/coretemp.c: In function 'adjust_tjmax':
  ../drivers/hwmon/coretemp.c:250:9: error: implicit declaration of function 'pci_get_domain_bus_and_slot' [-Werror=implicit-function-declaration]
    struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn);
  ../drivers/hwmon/coretemp.c:250:32: warning: initialization makes pointer from integer without a cast [enabled by default]
    struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[bhelgaas: identical patch also by Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>

Pull misc x86 fixes from Ingo Molnar:
 - topology enumeration fixes
 - KASAN fix
 - two entry fixes (not yet the big series related to KASLR)
 - remove obsolete code
 - instruction decoder fix
 - better /dev/mem sanity checks, hopefully working better this time
 - pkeys fixes
 - two ACPI fixes
 - 5-level paging related fixes
 - UMIP fixes that should make application visible faults more debuggable
 - boot fix for weird virtualization environment

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/decoder: Add new TEST instruction pattern
  x86/PCI: Remove unused HyperTransport interrupt support
  x86/umip: Fix insn_get_code_seg_params()'s return value
  x86/boot/KASLR: Remove unused variable
  x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
  x86/pkeys/selftests: Fix protection keys write() warning
  x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
  x86/mpx/selftests: Fix up weird arrays
  x86/pkeys: Update documentation about availability
  x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
  x86/smpboot: Fix __max_logical_packages estimate
  x86/topology: Avoid wasting 128k for package id array
  perf/x86/intel/uncore: Cache logical pkg id in uncore driver
  x86/acpi: Reduce code duplication in mp_override_legacy_irq()
  x86/acpi: Handle SCI interrupts above legacy space gracefully
  x86/boot: Fix boot failure when SMP MP-table is based at 0
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/selftests: Add test for mapping placement for 5-level paging
  ...

There are no in-tree callers of ht_create_irq(), the driver interface for
HyperTransport interrupts, left.  Remove the unused entry point and all the
supporting code.

See 8b955b0dddb3 ("[PATCH] Initial generic hypertransport interrupt
support").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pci@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...

* pci/virtualization:
  PCI: Document reset method return values
  PCI: Detach driver before procfs & sysfs teardown on device remove
  PCI: Apply Cavium ThunderX ACS quirk to more Root Ports
  PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
  PCI: Restore ARI Capable Hierarchy before setting numVFs
  PCI: Create SR-IOV virtfn/physfn links before attaching driver
  PCI: Expose SR-IOV offset, stride, and VF device ID via sysfs
  PCI: Cache the VF device ID in the SR-IOV structure
  PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO
  PCI: Remove unused function __pci_reset_function()
  PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()

* pci/resource:
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)
  PCI: Add pci_resize_resource() for resizing BARs
  PCI: Add resizable BAR infrastructure
  PCI: Add PCI resource type mask #define

* pm-core:
  ACPI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks
  PM / core: Add SMART_SUSPEND driver flag
  PCI / PM: Use the NEVER_SKIP driver flag
  PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  PM / core: Convert timers to use timer_setup()
  PM / core: Fix kerneldoc comments of four functions
  PM / core: Drop legacy class suspend/resume operations

The following pattern is often used:

  list_for_each_entry(dev, &bus->devices, bus_list) {
    if (pci_is_bridge(dev)) {
      ...
    }
  }

Add a for_each_pci_bridge() helper to make that code easier to write and
read by reducing indentation level.  It also saves one or few lines of code
in each occurrence.

Convert PCI core parts here at the same time.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[bhelgaas: fold in http://lkml.kernel.org/r/20171013165352.25550-1-andriy.shevchenko@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace the PCI-specific flag PCI_DEV_FLAGS_NEEDS_RESUME with the
PM core's DPM_FLAG_NEVER_SKIP one everywhere and drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>