linux-toradex.git/include/linux/pci_ids.h, branch v6.0-rc1

Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

2022-08-10T18:07:26+00:00

Pull cxl updates from Dan Williams:
 "Compute Express Link (CXL) updates for 6.0:

   - Introduce a 'struct cxl_region' object with support for
     provisioning and assembling persistent memory regions.

   - Introduce alloc_free_mem_region() to accompany the existing
     request_free_mem_region() as a method to allocate physical memory
     capacity out of an existing resource.

   - Export insert_resource_expand_to_fit() for the CXL subsystem to
     late-publish CXL platform windows in iomem_resource.

   - Add a polled mode PCI DOE (Data Object Exchange) driver service and
     use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
     Table)"

* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
  cxl/hdm: Fix skip allocations vs multiple pmem allocations
  cxl/region: Disallow region granularity != window granularity
  cxl/region: Fix x1 interleave to greater than x1 interleave routing
  cxl/region: Move HPA setup to cxl_region_attach()
  cxl/region: Fix decoder interleave programming
  Documentation: cxl: remove dangling kernel-doc reference
  cxl/region: describe targets and nr_targets members of cxl_region_params
  cxl/regions: add padding for cxl_rr_ep_add nested lists
  cxl/region: Fix IS_ERR() vs NULL check
  cxl/region: Fix region reference target accounting
  cxl/region: Fix region commit uninitialized variable warning
  cxl/region: Fix port setup uninitialized variable warnings
  cxl/region: Stop initializing interleave granularity
  cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
  cxl/acpi: Minimize granularity for x1 interleaves
  cxl/region: Delete 'region' attribute from root decoders
  cxl/acpi: Autoload driver for 'cxl_acpi' test devices
  cxl/region: decrement ->nr_targets on error in cxl_region_attach()
  cxl/region: prevent underflow in ways_to_cxl()
  cxl/region: uninitialized variable in alloc_hpa()
  ...

x86/amd_nb: Add AMD PCI IDs for SMN communication

2022-07-20T15:35:40+00:00

Add support for SMN communication on family 17h model A0h and family 19h
models 60h-70h.

  [ bp: Merge into a single patch. ]

Signed-off-by: Mario Limonciello 
Signed-off-by: Borislav Petkov 
Reviewed-by: Yazen Ghannam 
Acked-by: Bjorn Helgaas 	# pci_ids.h
Acked-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20220719195256.1516-1-mario.limonciello@amd.com

PCI: Add vendor ID for the PCI SIG

2022-07-19T22:38:04+00:00

This ID is used in DOE headers to identify protocols that are defined
within the PCI Express Base Specification, PCIe r6.0, sec 6.30.1.1 table
6-32.

Acked-by: Bjorn Helgaas 
Reviewed-by: Davidlohr Bueso 
Reviewed-by: Dan Williams 
Signed-off-by: Jonathan Cameron 
Link: https://lore.kernel.org/r/20220719205249.566684-2-ira.weiny@intel.com
Signed-off-by: Dan Williams

Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-03-25T20:02:05+00:00

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Move the VGA arbiter from drivers/gpu to drivers/pci because it's
     PCI-specific, not GPU-specific (Bjorn Helgaas)
   - Select the default VGA device consistently whether it's enumerated
     before or after VGA arbiter init, which fixes arches that enumerate
     PCI devices late (Huacai Chen)

  Resource management:
   - Support BAR sizes up to 8TB (Dongdong Liu)

  PCIe native device hotplug:
   - Fix "Command Completed" tracking to avoid spurious timouts when
     powering off empty slots (Liguang Zhang)
   - Quirk Qualcomm devices that don't implement Command Completed
     correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)

  Peer-to-peer DMA:
   - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
     (Michael J. Ruhl)

  APM X-Gene PCIe controller driver:
   - Revert generic DT parsing changes that broke some machines in the
     field (Marc Zyngier)

  Freescale i.MX6 PCIe controller driver:
   - Allow controller probe to succeed even when no devices currently
     present to allow hot-add later (Fabio Estevam)
   - Enable power management on i.MX6QP (Richard Zhu)
   - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
     device is connected (Richard Zhu)

  Marvell Aardvark PCIe controller driver:
   - Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
   - Add support for ERR and PME interrupts (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Add DT binding and support for "num-lanes" (Pali Rohár)
   - Add support for INTx interrupts (Pali Rohár)

  Microsoft Hyper-V host bridge driver:
   - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
     Feng)

  Qualcomm PCIe controller driver:
   - Add SM8450 DT binding and driver support (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:
   - Help the controller get to the L1 state since the hardware can't do
     it on its own (Marek Vasut)
   - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
     Vasut)

  SiFive FU740 PCIe controller driver:
   - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
   - Force 2.5GT/s for initial device probe (Ben Dooks)

  Socionext UniPhier Pro5 controller driver:
   - Add NX1 DT binding and driver support (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Restore MSI configuration so MSI works after resume (Jisheng
     Zhang)"

* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  x86/PCI: Add #includes to asm/pci_x86.h
  PCI: ibmphp: Remove unused assignments
  PCI: cpqphp: Remove unused assignments
  PCI: fu740: Remove unused assignments
  PCI: kirin: Remove unused assignments
  PCI: Remove unused assignments
  PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
  PCI: Avoid broken MSI on SB600 USB devices
  PCI: fu740: Force 2.5GT/s for initial device probe
  PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
  PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
  PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
  PCI: imx6: Invoke the PHY exit function after PHY power off
  PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
  PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
  PCI: dwc: Restore MSI Receiver mask during resume
  PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
  PCI/VGA: Replace full MIT license text with SPDX identifier
  PCI/VGA: Use unsigned format string to print lock counts
  PCI/VGA: Log bridge control messages when adding devices
  ...

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-03-24T20:13:26+00:00

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.

Core
----

- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.

- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).

- Continue the work of annotating packet drop reasons throughout the
stack.

- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.

- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.

- Extend the ref_tracker to allow catching use-after-free bugs.

BPF
---

- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.

- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.

- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.

- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.

- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.

- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).

- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.

- Allow cgroup BPF progs to return custom errors to user space.

- Add support for AF_UNIX iterator batching.

- Allow iterator programs to use sleepable helpers.

- Support JIT of add, and, or, xor and xchg atomic ops on arm64.

- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.

- Large number of libbpf API improvements, cleanups and deprecations.

Protocols
---------

- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.

- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.

- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.

- Support inserting IPv6 IOAM information to a fraction of frames.

- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)

- Support setting socket and IPv6 options via cmsg on ping6 sockets.

- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.

- Add support for locked bridge ports (for 802.1X).

- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.

- IPv6 extension header handling in Open vSwitch.

- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.

- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY

- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)

- Multi-BSSID beacon handling in AP mode for WiFi.

- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events

- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements

- Increase the max PDU size in CAN ISOTP to 64 kB.

Driver API
----------

- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.

- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.

- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.

- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.

- Allow configuring completion queue event size.

- Refactor page_pool to enable fragmenting after allocation.

- Add allocation and page reuse statistics to page_pool.

- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.

- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering

New hardware / drivers
----------------------

- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches

- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6

- Mobile:
- iosm: Intel M.2 7360 WWAN card

Drivers
-------

- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.

- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support

- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions

- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP

- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support

- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports

- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload

- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches

- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock

- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets

- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode

- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices

- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915

- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan

- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...

hisi_acc_qm: Move VF PCI device IDs to common header

2022-03-15T17:34:08+00:00

Move the PCI Device IDs of HiSilicon ACC VF devices to a common header
and also use a uniform naming convention.

This will be useful when we introduce the vfio PCI HiSilicon ACC live
migration driver in subsequent patches.

Cc: Bjorn Helgaas 
Acked-by: Zhou Wang 
Acked-by: Longfang Liu 
Acked-by: Kai Ye 
Signed-off-by: Shameer Kolothum 
Acked-by: Bjorn Helgaas 	# pci_ids.h
Link: https://lore.kernel.org/r/20220308184902.2242-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson

nfp: add support for NFP3800/NFP3803 PCIe devices

2022-03-12T07:10:22+00:00

Enable binding the nfp driver to NFP3800 and NFP3803 devices.
The PCIE_SRAM offset is different for the NFP3800 device, which also
only supports a single explicit group.

Changes to Dirk's work:
* 48-bit dma addressing is not ready yet. Keep 40-bit dma addressing
for NFP3800.

Signed-off-by: Dirk van der Merwe 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Fei Qin 
Signed-off-by: Simon Horman 
Signed-off-by: Jakub Kicinski

PCI: Add Fungible Vendor ID to pci_ids.h

2022-02-27T10:51:23+00:00

Cc: Bjorn Helgaas 
Cc: linux-pci@vger.kernel.org
Signed-off-by: Dimitris Michailidis 
Acked-by: Bjorn Helgaas 
Signed-off-by: David S. Miller

PCI: Add defines for normal and subtractive PCI bridges

2022-02-17T21:29:35+00:00

Add these PCI class codes to pci_ids.h:

  PCI_CLASS_BRIDGE_PCI_NORMAL
  PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE

Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.

[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár 
Signed-off-by: Bjorn Helgaas

Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-01-16T06:08:11+00:00

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Use pci_find_vsec_capability() instead of open-coding it (Andy
     Shevchenko)
   - Convert pci_dev_present() stub from macro to static inline to avoid
     'unused variable' errors (Hans de Goede)
   - Convert sysfs slot attributes from default_attrs to default_groups
     (Greg Kroah-Hartman)
   - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
     (Rajat Jain)
   - Remove unnecessary initialization of static variables (Longji Guo)

  Resource management:
   - Always write Intel I210 ROM BAR on update to work around device
     defect (Bjorn Helgaas)

  PCIe native device hotplug:
   - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
   - Fix infinite loop in pciehp IRQ handler on power fault (Lukas
     Wunner)

  Power management:
   - Convert amd64-agp, sis-agp, via-agp from legacy PCI power
     management to generic power management (Vaibhav Gupta)

  IOMMU:
   - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
     so it can work with an IOMMU (Yifeng Li)

  Error handling:
   - Add PCI_ERROR_RESPONSE and related definitions for signaling and
     checking for transaction errors on PCI (Naveen Naidu)
   - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
     instead of in host controller drivers, when transactions fail on
     PCI (Naveen Naidu)
   - Use PCI_POSSIBLE_ERROR() to check for possible failure of config
     reads (Naveen Naidu)

  Peer-to-peer DMA:
   - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)

  ASPM:
   - Calculate link L0s and L1 exit latencies when needed instead of
     caching them (Saheed O. Bolarinwa)
   - Calculate device L0s and L1 acceptable exit latencies when needed
     instead of caching them (Saheed O. Bolarinwa)
   - Remove struct aspm_latency since it's no longer needed (Saheed O.
     Bolarinwa)

  APM X-Gene PCIe controller driver:
   - Fix IB window setup, which was broken by the fact that IB resources
     are now sorted in address order instead of DT dma-ranges order (Rob
     Herring)

  Apple PCIe controller driver:
   - Enable clock gating to save power (Hector Martin)
   - Fix REFCLK1 enable/poll logic (Hector Martin)

  Broadcom STB PCIe controller driver:
   - Declare bitmap correctly for use by bitmap interfaces (Christophe
     JAILLET)
   - Clean up computation of legacy and non-legacy MSI bitmasks (Florian
     Fainelli)
   - Update suspend/resume/remove error handling to warn about errors
     and not fail the operation (Jim Quinlan)
   - Correct the "pcie" and "msi" interrupt descriptions in DT binding
     (Jim Quinlan)
   - Add DT bindings for endpoint voltage regulators (Jim Quinlan)
   - Split brcm_pcie_setup() into two functions (Jim Quinlan)
   - Add mechanism for turning on voltage regulators for connected
     devices (Jim Quinlan)
   - Turn voltage regulators for connected devices on/off when bus is
     added or removed (Jim Quinlan)
   - When suspending, don't turn off voltage regulators for wakeup
     devices (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Add i.MX8MM support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:
   - Use DWC common ops instead of layerscape-specific link-up functions
     (Hou Zhiqiang)

  Intel VMD host bridge driver:
   - Honor platform ACPI _OSC feature negotiation for Root Ports below
     VMD (Kai-Heng Feng)
   - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
   - Reset everything below VMD before enumerating to work around
     failure to enumerate NVMe devices when guest OS reboots (Nirmal
     Patel)

  Bridge emulation (used by Marvell Aardvark and MVEBU):
   - Make emulated ROM BAR read-only by default (Pali Rohár)
   - Make some emulated legacy PCI bits read-only for PCIe devices (Pali
     Rohár)
   - Update reserved bits in emulated PCIe Capability (Pali Rohár)
   - Allow drivers to emulate different PCIe Capability versions (Pali
     Rohár)
   - Set emulated Capabilities List bit for all PCIe devices, since they
     must have at least a PCIe Capability (Pali Rohár)

  Marvell Aardvark PCIe controller driver:
   - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
     DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
     Rohár)
   - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
     registers (Pali Rohár)
   - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
   - Disable bus mastering when unbinding host controller driver (Pali
     Rohár)
   - Mask all interrupts when unbinding host controller driver (Pali
     Rohár)
   - Fix memory leak in host controller unbind (Pali Rohár)
   - Assert PERST# when unbinding host controller driver (Pali Rohár)
   - Disable link training when unbinding host controller driver (Pali
     Rohár)
   - Disable common PHY when unbinding host controller driver (Pali
     Rohár)
   - Fix resource type checking to check only IORESOURCE_MEM, not
     IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Implement pci_remap_iospace() for ARM so mvebu can use
     devm_pci_remap_iospace() instead of the previous ARM-specific
     pci_ioremap_io() interface (Pali Rohár)
   - Use the standard pci_host_probe() instead of the device-specific
     mvebu_pci_host_probe() (Pali Rohár)
   - Replace all uses of ARM-specific pci_ioremap_io() with the ARM
     implementation of the standard pci_remap_iospace() interface and
     remove pci_ioremap_io() (Pali Rohár)
   - Skip initializing invalid Root Ports (Pali Rohár)
   - Check for errors from pci_bridge_emul_init() (Pali Rohár)
   - Ignore any bridges at non-zero function numbers (Pali Rohár)
   - Return ~0 data for invalid config read size (Pali Rohár)
   - Disallow mapping interrupts on emulated bridges (Pali Rohár)
   - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
     initialization (Pali Rohár)
   - Make type bits in Root Port I/O Base register read-only (Pali
     Rohár)
   - Disable Root Port windows when base/limit set to invalid values
     (Pali Rohár)
   - Set controller to Root Complex mode (Pali Rohár)
   - Set Root Port Class Code to PCI Bridge (Pali Rohár)
   - Update emulated Root Port secondary bus numbers to better reflect
     the actual topology (Pali Rohár)
   - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
     pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
   - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
     Ports (Pali Rohár)
   - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
     (Pali Rohár)
   - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
     Armada XP and newer devices (Pali Rohár)
   - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
     (Pali Rohár)
   - Add support for compiling as a module (Pali Rohár)

  MediaTek PCIe controller driver:
   - Assert PERST# for 100ms to allow power and clock to stabilize
     (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:
   - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
     respond to the request causes failure to exit L1 PM Substate
     (Jianjun Wang)

  MediaTek MT7621 PCIe controller driver:
   - Declare mt7621_pci_ops static (Sergio Paracuellos)
   - Give pcibios_root_bridge_prepare() access to host bridge windows
     (Sergio Paracuellos)
   - Move MIPS I/O coherency unit setup from driver to
     pcibios_root_bridge_prepare() (Sergio Paracuellos)
   - Add missing MODULE_LICENSE() (Sergio Paracuellos)
   - Allow COMPILE_TEST for all arches (Sergio Paracuellos)

  Microsoft Hyper-V host bridge driver:
   - Add hv-internal interfaces to encapsulate arch IRQ dependencies
     (Sunil Muthuswamy)
   - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)

  Qualcomm PCIe controller driver:
   - Undo PM setup in qcom_pcie_probe() error handling path (Christophe
     JAILLET)
   - Use __be16 type to store return value from cpu_to_be16()
     (Manivannan Sadhasivam)
   - Constify static dw_pcie_ep_ops (Rikard Falkeborn)

  Renesas R-Car PCIe controller driver:
   - Fix aarch32 abort handler so it doesn't check the wrong bus clock
     before accessing the host controller (Marek Vasut)

  TI Keystone PCIe controller driver:
   - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
     DT properties (Kishon Vijay Abraham I)

  MicroSemi Switchtec management driver:
   - Add Gen4 automotive device IDs (Kelvin Cao)
   - Declare state_names[] as static so it's not allocated and
     initialized for every call (Kelvin Cao)

  Host controller driver cleanups:
   - Use of_device_get_match_data(), not of_match_device(), when we only
     need the device data in altera, artpec6, cadence, designware-plat,
     dra7xx, keystone, kirin (Fan Fei)
   - Drop pointless of_device_get_match_data() cast in j721e (Bjorn
     Helgaas)
   - Drop redundant struct device * from j721e since struct cdns_pcie
     already has one (Bjorn Helgaas)
   - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
     mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
     xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
   - Fix invalid address space conversions in hisi, spear13xx (Bjorn
     Helgaas)

  Miscellaneous:
   - Sort Intel Device IDs by value (Andy Shevchenko)
   - Change Capability offsets to hex to match spec (Baruch Siach)
   - Correct misspellings (Krzysztof Wilczyński)
   - Terminate statement with semicolon in pci_endpoint_test.c (Ming
     Wang)"

* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
  PCI: mt7621: Allow COMPILE_TEST for all arches
  PCI: mt7621: Add missing MODULE_LICENSE()
  PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
  PCI: Let pcibios_root_bridge_prepare() access bridge->windows
  PCI: mt7621: Declare mt7621_pci_ops static
  PCI: brcmstb: Do not turn off WOL regulators on suspend
  PCI: brcmstb: Add control of subdevice voltage regulators
  PCI: brcmstb: Add mechanism to turn on subdev regulators
  PCI: brcmstb: Split brcm_pcie_setup() into two funcs
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
  PCI: brcmstb: Fix function return value handling
  PCI: brcmstb: Do not use __GENMASK
  PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
  PCI: hv: Add arm64 Hyper-V vPCI support
  PCI: hv: Make the code arch neutral by adding arch specific interfaces
  PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
  x86/PCI: Remove initialization of static variables to false
  PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
  misc: pci_endpoint_test: Terminate statement with semicolon
  ...