linux-toradex.git/include/linux/pci_ids.h, branch v6.7-rc8 Linux kernel for Apalis and Colibri modules Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2023-11-03T00:05:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-11-03T00:05:18+00:00 27beb3ca347fa29fef5c23b351120239b8cf0612 Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2023-10-31T15:10:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-10-31T15:10:11+00:00 89ed67ef126c4160349c1b96fdb775ea6170ac90 Pull networking updates from Jakub Kicinski: "Core & protocols: - Support usec resolution of TCP timestamps, enabled selectively by a route attribute. - Defer regular TCP ACK while processing socket backlog, try to send a cumulative ACK at the end. Increase single TCP flow performance on a 200Gbit NIC by 20% (100Gbit -> 120Gbit). - The Fair Queuing (FQ) packet scheduler: - add built-in 3 band prio / WRR scheduling - support bypass if the qdisc is mostly idle (5% speed up for TCP RR) - improve inactive flow reporting - optimize the layout of structures for better cache locality - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern replacement for the old MD5 option. - Add more retransmission timeout (RTO) related statistics to TCP_INFO. - Support sending fragmented skbs over vsock sockets. - Make sure we send SIGPIPE for vsock sockets if socket was shutdown(). - Add sysctl for ignoring lower limit on lifetime in Router Advertisement PIO, based on an in-progress IETF draft. - Add sysctl to control activation of TCP ping-pong mode. - Add sysctl to make connection timeout in MPTCP configurable. - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps limit the number of wakeups. - Support netlink GET for MDB (multicast forwarding), allowing user space to request a single MDB entry instead of dumping the entire table. - Support selective FDB flushing in the VXLAN tunnel driver. - Allow limiting learned FDB entries in bridges, prevent OOM attacks. - Allow controlling via configfs netconsole targets which were created via the kernel cmdline at boot, rather than via configfs at runtime. - Support multiple PTP timestamp event queue readers with different filters. - MCTP over I3C. BPF: - Add new veth-like netdevice where BPF program defines the logic of the xmit routine. It can operate in L3 and L2 mode. - Support exceptions - allow asserting conditions which should never be true but are hard for the verifier to infer. With some extra flexibility around handling of the exit / failure: https://lwn.net/Articles/938435/ - Add support for local per-cpu kptr, allow allocating and storing per-cpu objects in maps. Access to those objects operates on the value for the current CPU. This allows to deprecate local one-off implementations of per-CPU storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps. - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is for systemd to re-implement the LogNamespace feature which allows running multiple instances of systemd-journald to process the logs of different services. - Enable open-coded task_vma iteration, after maple tree conversion made it hard to directly walk VMAs in tracing programs. - Add open-coded task, css_task and css iterator support. One of the use cases is customizable OOM victim selection via BPF. - Allow source address selection with bpf_*_fib_lookup(). - Add ability to pin BPF timer to the current CPU. - Prevent creation of infinite loops by combining tail calls and fentry/fexit programs. - Add missed stats for kprobes to retrieve the number of missed kprobe executions and subsequent executions of BPF programs. - Inherit system settings for CPU security mitigations. - Add BPF v4 CPU instruction support for arm32 and s390x. Changes to common code: - overflow: add DEFINE_FLEX() for on-stack definition of structs with flexible array members. - Process doc update with more guidance for reviewers. Driver API: - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy mutex in most places and remove a lot of smaller locks. - Create a common DPLL configuration API. Allow configuring and querying state of PLL circuits used for clock syntonization, in network time distribution. - Unify fragmented and full page allocation APIs in page pool code. Let drivers be ignorant of PAGE_SIZE. - Rework PHY state machine to avoid races with calls to phy_stop(). - Notify DSA drivers of MAC address changes on user ports, improve correctness of offloads which depend on matching port MAC addresses. - Allow antenna control on injected WiFi frames. - Reduce the number of variants of napi_schedule(). - Simplify error handling when composing devlink health messages. Misc: - A lot of KCSAN data race "fixes", from Eric. - A lot of __counted_by() annotations, from Kees. - A lot of strncpy -> strscpy and printf format fixes. - Replace master/slave terminology with conduit/user in DSA drivers. - Handful of KUnit tests for netdev and WiFi core. Removed: - AppleTalk COPS. - AppleTalk ipddp. - TI AR7 CPMAC Ethernet driver. Drivers: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - add a driver for the Intel E2000 IPUs - make CRC/FCS stripping configurable - cross-timestamping for E823 devices - basic support for E830 devices - use aux-bus for managing client drivers - i40e: report firmware versions via devlink - nVidia/Mellanox: - support 4-port NICs - increase max number of channels to 256 - optimize / parallelize SF creation flow - Broadcom (bnxt): - enhance NIC temperature reporting - support PAM4 speeds and lane configuration - Marvell OcteonTX2: - PTP pulse-per-second output support - enable hardware timestamping for VFs - Solarflare/AMD: - conntrack NAT offload and offload for tunnels - Wangxun (ngbe/txgbe): - expose HW statistics - Pensando/AMD: - support PCI level reset - narrow down the condition under which skbs are linearized - Netronome/Corigine (nfp): - support CHACHA20-POLY1305 crypto in IPsec offload - Ethernet NICs embedded, slower, virtual: - Synopsys (stmmac): - add Loongson-1 SoC support - enable use of HW queues with no offload capabilities - enable PPS input support on all 5 channels - increase TX coalesce timer to 5ms - RealTek USB (r8152): improve efficiency of Rx by using GRO frags - xen: support SW packet timestamping - add drivers for implementations based on TI's PRUSS (AM64x EVM) - nVidia/Mellanox Ethernet datacenter switches: - avoid poor HW resource use on Spectrum-4 by better block selection for IPv6 multicast forwarding and ordering of blocks in ACL region - Ethernet embedded switches: - Microchip: - support configuring the drive strength for EMI compliance - ksz9477: partial ACL support - ksz9477: HSR offload - ksz9477: Wake on LAN - Realtek: - rtl8366rb: respect device tree config of the CPU port - Ethernet PHYs: - support Broadcom BCM5221 PHYs - TI dp83867: support hardware LED blinking - CAN: - add support for Linux-PHY based CAN transceivers - at91_can: clean up and use rx-offload helpers - WiFi: - MediaTek (mt76): - new sub-driver for mt7925 USB/PCIe devices - HW wireless <> Ethernet bridging in MT7988 chips - mt7603/mt7628 stability improvements - Qualcomm (ath12k): - WCN7850: - enable 320 MHz channels in 6 GHz band - hardware rfkill support - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster - read board data variant name from SMBIOS - QCN9274: mesh support - RealTek (rtw89): - TDMA-based multi-channel concurrency (MCC) - Silicon Labs (wfx): - Remain-On-Channel (ROC) support - Bluetooth: - ISO: many improvements for broadcast support - mark BCM4378/BCM4387 as BROKEN_LE_CODED - add support for QCA2066 - btmtksdio: enable Bluetooth wakeup from suspend" * tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits) net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos() net: mana: Use xdp_set_features_flag instead of direct assignment vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size() iavf: delete the iavf client interface iavf: add a common function for undoing the interrupt scheme iavf: use unregister_netdev iavf: rely on netdev's own registered state iavf: fix the waiting time for initial reset iavf: in iavf_down, don't queue watchdog_task if comms failed iavf: simplify mutex_trylock+sleep loops iavf: fix comments about old bit locks doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name tools: ynl: introduce option to process unknown attributes or types ipvlan: properly track tx_errors netdevsim: Block until all devices are released nfp: using napi_build_skb() to replace build_skb() net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy" net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN net: dsa: microchip: Refactor switch shutdown routine for WoL preparation ... 
Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support usec resolution of TCP timestamps, enabled selectively by a
     route attribute.

   - Defer regular TCP ACK while processing socket backlog, try to send
     a cumulative ACK at the end. Increase single TCP flow performance
     on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

   - The Fair Queuing (FQ) packet scheduler:
       - add built-in 3 band prio / WRR scheduling
       - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
       - improve inactive flow reporting
       - optimize the layout of structures for better cache locality

   - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
     replacement for the old MD5 option.

   - Add more retransmission timeout (RTO) related statistics to
     TCP_INFO.

   - Support sending fragmented skbs over vsock sockets.

   - Make sure we send SIGPIPE for vsock sockets if socket was
     shutdown().

   - Add sysctl for ignoring lower limit on lifetime in Router
     Advertisement PIO, based on an in-progress IETF draft.

   - Add sysctl to control activation of TCP ping-pong mode.

   - Add sysctl to make connection timeout in MPTCP configurable.

   - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
     limit the number of wakeups.

   - Support netlink GET for MDB (multicast forwarding), allowing user
     space to request a single MDB entry instead of dumping the entire
     table.

   - Support selective FDB flushing in the VXLAN tunnel driver.

   - Allow limiting learned FDB entries in bridges, prevent OOM attacks.

   - Allow controlling via configfs netconsole targets which were
     created via the kernel cmdline at boot, rather than via configfs at
     runtime.

   - Support multiple PTP timestamp event queue readers with different
     filters.

   - MCTP over I3C.

  BPF:

   - Add new veth-like netdevice where BPF program defines the logic of
     the xmit routine. It can operate in L3 and L2 mode.

   - Support exceptions - allow asserting conditions which should never
     be true but are hard for the verifier to infer. With some extra
     flexibility around handling of the exit / failure:

          https://lwn.net/Articles/938435/

   - Add support for local per-cpu kptr, allow allocating and storing
     per-cpu objects in maps. Access to those objects operates on the
     value for the current CPU.

     This allows to deprecate local one-off implementations of per-CPU
     storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

   - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
     for systemd to re-implement the LogNamespace feature which allows
     running multiple instances of systemd-journald to process the logs
     of different services.

   - Enable open-coded task_vma iteration, after maple tree conversion
     made it hard to directly walk VMAs in tracing programs.

   - Add open-coded task, css_task and css iterator support. One of the
     use cases is customizable OOM victim selection via BPF.

   - Allow source address selection with bpf_*_fib_lookup().

   - Add ability to pin BPF timer to the current CPU.

   - Prevent creation of infinite loops by combining tail calls and
     fentry/fexit programs.

   - Add missed stats for kprobes to retrieve the number of missed
     kprobe executions and subsequent executions of BPF programs.

   - Inherit system settings for CPU security mitigations.

   - Add BPF v4 CPU instruction support for arm32 and s390x.

  Changes to common code:

   - overflow: add DEFINE_FLEX() for on-stack definition of structs with
     flexible array members.

   - Process doc update with more guidance for reviewers.

  Driver API:

   - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
     mutex in most places and remove a lot of smaller locks.

   - Create a common DPLL configuration API. Allow configuring and
     querying state of PLL circuits used for clock syntonization, in
     network time distribution.

   - Unify fragmented and full page allocation APIs in page pool code.
     Let drivers be ignorant of PAGE_SIZE.

   - Rework PHY state machine to avoid races with calls to phy_stop().

   - Notify DSA drivers of MAC address changes on user ports, improve
     correctness of offloads which depend on matching port MAC
     addresses.

   - Allow antenna control on injected WiFi frames.

   - Reduce the number of variants of napi_schedule().

   - Simplify error handling when composing devlink health messages.

  Misc:

   - A lot of KCSAN data race "fixes", from Eric.

   - A lot of __counted_by() annotations, from Kees.

   - A lot of strncpy -> strscpy and printf format fixes.

   - Replace master/slave terminology with conduit/user in DSA drivers.

   - Handful of KUnit tests for netdev and WiFi core.

  Removed:

   - AppleTalk COPS.

   - AppleTalk ipddp.

   - TI AR7 CPMAC Ethernet driver.

  Drivers:

   - Ethernet high-speed NICs:
      - Intel (100G, ice, idpf):
         - add a driver for the Intel E2000 IPUs
         - make CRC/FCS stripping configurable
         - cross-timestamping for E823 devices
         - basic support for E830 devices
         - use aux-bus for managing client drivers
         - i40e: report firmware versions via devlink
      - nVidia/Mellanox:
         - support 4-port NICs
         - increase max number of channels to 256
         - optimize / parallelize SF creation flow
      - Broadcom (bnxt):
         - enhance NIC temperature reporting
         - support PAM4 speeds and lane configuration
      - Marvell OcteonTX2:
         - PTP pulse-per-second output support
         - enable hardware timestamping for VFs
      - Solarflare/AMD:
         - conntrack NAT offload and offload for tunnels
      - Wangxun (ngbe/txgbe):
         - expose HW statistics
      - Pensando/AMD:
         - support PCI level reset
         - narrow down the condition under which skbs are linearized
      - Netronome/Corigine (nfp):
         - support CHACHA20-POLY1305 crypto in IPsec offload

   - Ethernet NICs embedded, slower, virtual:
      - Synopsys (stmmac):
         - add Loongson-1 SoC support
         - enable use of HW queues with no offload capabilities
         - enable PPS input support on all 5 channels
         - increase TX coalesce timer to 5ms
      - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
      - xen: support SW packet timestamping
      - add drivers for implementations based on TI's PRUSS (AM64x EVM)

   - nVidia/Mellanox Ethernet datacenter switches:
      - avoid poor HW resource use on Spectrum-4 by better block
        selection for IPv6 multicast forwarding and ordering of blocks
        in ACL region

   - Ethernet embedded switches:
      - Microchip:
         - support configuring the drive strength for EMI compliance
         - ksz9477: partial ACL support
         - ksz9477: HSR offload
         - ksz9477: Wake on LAN
      - Realtek:
         - rtl8366rb: respect device tree config of the CPU port

   - Ethernet PHYs:
      - support Broadcom BCM5221 PHYs
      - TI dp83867: support hardware LED blinking

   - CAN:
      - add support for Linux-PHY based CAN transceivers
      - at91_can: clean up and use rx-offload helpers

   - WiFi:
      - MediaTek (mt76):
         - new sub-driver for mt7925 USB/PCIe devices
         - HW wireless <> Ethernet bridging in MT7988 chips
         - mt7603/mt7628 stability improvements
      - Qualcomm (ath12k):
         - WCN7850:
            - enable 320 MHz channels in 6 GHz band
            - hardware rfkill support
            - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
              make scan faster
            - read board data variant name from SMBIOS
        - QCN9274: mesh support
      - RealTek (rtw89):
         - TDMA-based multi-channel concurrency (MCC)
      - Silicon Labs (wfx):
         - Remain-On-Channel (ROC) support

   - Bluetooth:
      - ISO: many improvements for broadcast support
      - mark BCM4378/BCM4387 as BROKEN_LE_CODED
      - add support for QCA2066
      - btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
  net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
  net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
  net: mana: Use xdp_set_features_flag instead of direct assignment
  vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
  iavf: delete the iavf client interface
  iavf: add a common function for undoing the interrupt scheme
  iavf: use unregister_netdev
  iavf: rely on netdev's own registered state
  iavf: fix the waiting time for initial reset
  iavf: in iavf_down, don't queue watchdog_task if comms failed
  iavf: simplify mutex_trylock+sleep loops
  iavf: fix comments about old bit locks
  doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
  tools: ynl: introduce option to process unknown attributes or types
  ipvlan: properly track tx_errors
  netdevsim: Block until all devices are released
  nfp: using napi_build_skb() to replace build_skb()
  net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
  net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
  net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
  ...
Merge tag 'mt76-for-kvalo-2023-09-30' of https://github.com/nbd168/wireless 2023-10-09T06:35:41+00:00 Kalle Valo kvalo@kernel.org 2023-10-09T06:35:41+00:00 089482a06b74a40d45773b1871182e8f04be026b mt76 patches for 6.7 * mt7603/mt7628 stability improvements * fixes * new driver for mt7925 
mt76 patches for 6.7

* mt7603/mt7628 stability improvements
* fixes
* new driver for mt7925
PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device 2023-10-05T16:10:43+00:00 Vicki Pfau vi@endrift.com 2023-09-27T20:22:12+00:00 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform. be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support. Extend that quirk to include the VanGogh SoC USB3 device. Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com Signed-off-by: Vicki Pfau <vi@endrift.com> [bhelgaas: include be6646bfbaec reference, add stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.19+ 
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.

be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.

Extend that quirk to include the VanGogh SoC USB3 device.

Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v3.19+
wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023) 2023-09-30T18:03:04+00:00 Ingo Rohloff lundril@gmx.de 2023-08-26T20:02:41+00:00 fce9c967820a72f600abbf061d7077861685a14d In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is used, which according to its PCI Vendor ID is from "ITTIM Technology". This chip works flawlessly with the mt7921e module. The driver doesn't bind to this PCI device, because the Vendor ID from "ITTIM Technology" is not recognized. This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi chip. Signed-off-by: Ingo Rohloff <lundril@gmx.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> 
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is
used, which according to its PCI Vendor ID is from "ITTIM Technology".

This chip works flawlessly with the mt7921e module.  The driver doesn't
bind to this PCI device, because the Vendor ID from "ITTIM Technology" is
not recognized.

This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of
PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi
chip.

Signed-off-by: Ingo Rohloff <lundril@gmx.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
x86/amd_nb: Add AMD Family MI300 PCI IDs 2023-09-27T07:53:23+00:00 Muralidhara M K muralidhara.mk@amd.com 2023-09-26T05:19:32+00:00 24775700eaa93ff83b2a0f1e005879cdf186cdd9 Add new Root, Device 18h Function 3, and Function 4 PCI IDS for AMD F19h Model 90h-9fh (MI300A). Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com> Signed-off-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230926051932.193239-1-suma.hegde@amd.com 
Add new Root, Device 18h Function 3, and Function 4 PCI IDS
for AMD F19h Model 90h-9fh (MI300A).

Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230926051932.193239-1-suma.hegde@amd.com
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2023-09-01T16:38:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-01T16:38:00+00:00 8e1e49550dc85694abd04d86a8ee36bc98bd8b9e Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ... 
Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 2023-08-30T20:45:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-08-30T20:45:05+00:00 4fb0dacb78c6a041bbd38ddd998df806af5c2c69 Pull sound updates from Takashi Iwai: "We've received a fairly wide range of changes at this time, including for ALSA and ASoC core, but all of them are rather small changes. Here are some highlights: ALSA / ASoC Core: - Fixes of inconsistent locking around control API helpers - A few new control API functions and cleanups - Workarounds for potential UAFs by delayed kobj releases - Unified PCM copy ops with iov_iter - Continued efforts for ASoC API cleanups ASoC: - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in some IIO changes - Create a library function for intlog10() and use it in the NAU8825 driver - Convert drivers to use the more modern maple tree register cache - Lots of work on the SOF framework, AMD and Intel drivers, including a lot of cleanup and new device support - Standardization of the presentation of jacks from drivers - Provision of some generic sound card DT properties - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821, AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel platforms including AVS machines with ES8336 and RT5663, Mediatek MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110 Others: - New test coverage including ASoC and topology tests in KUnit; this also involves enabling UML builds of ALSA since that's the default KUnit test environment which pulls in the addition of some stubs to the driver - More enhancement of pcmtest driver - A few fixes / enhancements of MIDI 2.0 UMP core - Using PCI definitions in allover HD-audio code - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs - CS35L41 HD-audio sub-codec improvements - Continued emu10k1 improvements" * tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits) ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl ASoC: dwc: i2s: Fix unused functions ALSA: usb-audio: Don't try to submit URBs after disconnection ALSA: emu10k1: add separate documentation for E-MU cards ALSA: emu10k1: more documentation updates ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst ALSA: ump: Fix -Wformat-truncation warnings ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs ALSA: doc: Fix missing backquote in midi-2.0.rst ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe() ASoC: soc-core.c: Do not error if a DAI link component is not found ASoC: codecs: Fix error code in aw88261_i2c_probe() ASoC: audio-graph-card.c: move audio_graph_parse_of() ASoC: cs42l43: Use new-style PM runtime macros ALSA: documentation: Add description for USB MIDI 2.0 gadget driver ALSA: ump: Don't create unused substreams for static blocks ALSA: ump: Fill group names for legacy rawmidi substreams ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs ALSA: ac97: Fix possible error value of *rac97 ... 
Pull sound updates from Takashi Iwai:
 "We've received a fairly wide range of changes at this time, including
  for ALSA and ASoC core, but all of them are rather small changes.

  Here are some highlights:

  ALSA / ASoC Core:
   - Fixes of inconsistent locking around control API helpers
   - A few new control API functions and cleanups
   - Workarounds for potential UAFs by delayed kobj releases
   - Unified PCM copy ops with iov_iter
   - Continued efforts for ASoC API cleanups

  ASoC:
   - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
     some IIO changes
   - Create a library function for intlog10() and use it in the NAU8825
     driver
   - Convert drivers to use the more modern maple tree register cache
   - Lots of work on the SOF framework, AMD and Intel drivers, including
     a lot of cleanup and new device support
   - Standardization of the presentation of jacks from drivers
   - Provision of some generic sound card DT properties
   - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
     AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
     platforms including AVS machines with ES8336 and RT5663, Mediatek
     MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110

  Others:
   - New test coverage including ASoC and topology tests in KUnit; this
     also involves enabling UML builds of ALSA since that's the default
     KUnit test environment which pulls in the addition of some stubs to
     the driver
   - More enhancement of pcmtest driver
   - A few fixes / enhancements of MIDI 2.0 UMP core
   - Using PCI definitions in allover HD-audio code
   - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
   - CS35L41 HD-audio sub-codec improvements
   - Continued emu10k1 improvements"

* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
  ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
  ASoC: dwc: i2s: Fix unused functions
  ALSA: usb-audio: Don't try to submit URBs after disconnection
  ALSA: emu10k1: add separate documentation for E-MU cards
  ALSA: emu10k1: more documentation updates
  ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
  ALSA: ump: Fix -Wformat-truncation warnings
  ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
  ALSA: doc: Fix missing backquote in midi-2.0.rst
  ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
  ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
  ASoC: soc-core.c: Do not error if a DAI link component is not found
  ASoC: codecs: Fix error code in aw88261_i2c_probe()
  ASoC: audio-graph-card.c: move audio_graph_parse_of()
  ASoC: cs42l43: Use new-style PM runtime macros
  ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
  ALSA: ump: Don't create unused substreams for static blocks
  ALSA: ump: Fill group names for legacy rawmidi substreams
  ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
  ALSA: ac97: Fix possible error value of *rac97
  ...
x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models 2023-08-10T12:12:48+00:00 Avadhut Naik Avadhut.Naik@amd.com 2023-08-09T03:52:42+00:00 c64016609b6f66b753b5f37929a191477fa584c0 Add new PCI Device IDs required to support AMD's new Family 1Ah-based models 00h-1Fh, 20h and 40h-4Fh. [ bp: Zap a useless sentence. ] Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Avadhut Naik <Avadhut.Naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230809035244.2722455-2-avadhut.naik@amd.com 
Add new PCI Device IDs required to support AMD's new Family 1Ah-based
models 00h-1Fh, 20h and 40h-4Fh.

  [ bp: Zap a useless sentence. ]

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Avadhut Naik <Avadhut.Naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230809035244.2722455-2-avadhut.naik@amd.com
PCI: add ArrowLake-S PCI ID for Intel HDAudio subsystem. 2023-08-04T10:53:52+00:00 Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com 2023-08-02T15:01:01+00:00 a13b5340aa6892685adf655cd4bfa91a83d5a9d2 Add part ID to common include file Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Add part ID to common include file

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>