linux-toradex.git/include/linux/phy.h, branch v5.1-rc1

net: phy: remove gen10g_no_soft_reset

2019-03-04T05:47:57+00:00

genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops,
one is enough.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: don't export gen10g_read_status

2019-03-04T05:47:42+00:00

gen10g_read_status is deprecated, therefore stop exporting it.
We don't want to encourage anybody to use it.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: remove gen10g_config_init

2019-03-04T05:47:42+00:00

ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported
and advertising bitmap because it's part of PHY_10GBIT_FEATURES.
And all users of gen10g_config_init use PHY_10GBIT_FEATURES.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: remove gen10g_suspend and gen10g_resume

2019-03-04T05:47:42+00:00

phy_suspend() and phy_resume() are no-ops anyway if no callback is
defined. Therefore we don't need these stubs.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-02-24T20:06:19+00:00

Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.

The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.

However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.

Signed-off-by: David S. Miller

net: phy: realtek: Dummy IRQ calls for RTL8366RB

2019-02-24T02:45:28+00:00

This fixes a regression introduced by
commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7
"net: phy: replace PHY_HAS_INTERRUPT with a check for
config_intr and ack_interrupt".

This assumes that a PHY cannot trigger interrupt unless
it has .config_intr() or .ack_interrupt() implemented.
A later patch makes the code assume both need to be
implemented for interrupts to be present.

But this PHY (which is inside a DSA) will happily
fire interrupts without either callback.

Implement dummy callbacks for .config_intr() and
.ack_interrupt() in the phy header to fix this.

Tested on the RTL8366RB on D-Link DIR-685.

Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt")
Cc: Heiner Kallweit 
Signed-off-by: Linus Walleij 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: add genphy_c45_read_status

2019-02-23T22:12:09+00:00

Similar to genphy_read_status() for Clause 22 add a generic read_status
function for Clause 45.

Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller

net: phy: add genphy_c45_check_and_restart_aneg

2019-02-21T21:03:06+00:00

This function will be used by config_aneg callback implementations of
PHY drivers and allows to reduce boilerplate code.

Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller

net: phy: export genphy_config_eee_advert

2019-02-21T21:03:06+00:00

We want to use this function in phy-c45.c too, therefore export it.

Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller

net: phy: add genphy_c45_an_config_aneg

2019-02-17T18:26:35+00:00

C45 configuration of 10/100 and multi-giga bit auto negotiation
advertisement is standardized. Configuration of 1000Base-T however
appears to be vendor specific. Move the generic code out of the
Marvell driver into the common phy-c45.c file.

v2:
- change function name to genphy_c45_an_config_aneg

Signed-off-by: Andrew Lunn 
[hkallweit1@gmail.com: use new helper linkmode_adv_to_mii_10gbt_adv_t and split patch]
Signed-off-by: Heiner Kallweit 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller