linux-toradex.git/include/linux/pinctrl/pinctrl.h, branch v6.0-rc1

pinctrl: Add pingroup and define PINCTRL_PINGROUP

2022-06-15T13:54:20+00:00

Add 'struct pingroup' to represent pingroup and 'PINCTRL_PINGROUP'
macro for inline use. Both are used to manage and represent
larger number of pingroups.

Signed-off-by: Basavaraj Natikar 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20220601152900.1012813-2-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij

pinctrl: Remove hole in pinctrl_gpio_range

2020-11-05T13:56:50+00:00

On 64-bit platforms, pointer size and alignment are 64-bit, hence two
4-byte holes are present before the pins and gc members of the
pinctrl_gpio_range structure.  Get rid of these holes by moving the
pins pointer.

This reduces kernel size of an arm64 Rockchip kernel by ca. 512 bytes.

Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20201028145117.1731876-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij

pinctrl: Define of_pinctrl_get() dummy for !PINCTRL

2020-03-31T20:08:54+00:00

Currently, the of_pinctrl_get() dummy is only defined for !OF, which can
still cause build failures on configurations with OF enabled but PINCTRL
disabled. Make sure to define the dummy if either OF or PINCTRL are not
enabled.

Reported-by: Stephen Rothwell 
Signed-off-by: Thierry Reding 
Link: https://lore.kernel.org/r/20200330095801.2421589-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27+00:00

Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:

Core changes:

- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.

This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.

Right now it is opt-in per driver.

- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.

Right now the Meson (AMlogic) driver needs this.

New drivers:

- New subdriver for the Tegra 194 SoC.

- New subdriver for the Qualcomm SDM845.

- New subdriver for the Qualcomm SM8150.

- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).

- New subdriver for Marvell MV98DX1135.

Driver improvements:

- The Bitmain BM1880 driver now supports pin config in addition to
muxing.

- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.

- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.

- A slew of improvements over the SH PFC drivers as usual.

- Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...

pinctrl: remove unneeded #ifdef around declarations

2019-06-25T08:49:18+00:00

What is the point in surrounding the whole of declarations with
ifdef like this?

  #ifdef CONFIG_FOO
  int foo(void);
  #endif

If CONFIG_FOO is not defined, all callers of foo() will fail
with implicit declaration errors since the top Makefile adds
-Werror-implicit-function-declaration to KBUILD_CFLAGS.

This breaks the build earlier when you are doing something wrong.
That's it.

Anyway, it will fail to link since the definition of foo() is not
compiled.

In summary, these ifdef are unneeded.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: remove unused pin_is_valid()

2019-06-12T07:10:54+00:00

This function was used by pin_request() to pointlessly double-check
the pin validity, and it was the only user ever.

Since commit d2f6a1c6fb0e ("pinctrl: remove double pin validity
check."), no one has ever used it.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194

2019-05-30T18:29:22+00:00

Based on 1 normalized pattern(s):

  license terms gnu general public license gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Alexios Zavras 
Reviewed-by: Steve Winslow 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
Signed-off-by: Greg Kroah-Hartman

pinctrl: Enable device link creation for pin control

2019-05-23T07:34:54+00:00

A pin controller may want to create a link between itself
and its clients to be sure of suspend/resume call ordering.

Introduce link_consumers field in pinctrl_desc structure to let
pinctrl core knows that controller expect to create a link.

Signed-off-by: Benjamin Gaignard 
[Renamed create_link to link_consumers]
Signed-off-by: Linus Walleij

pinctrl: remove include file from

2018-02-03T20:10:09+00:00

When pulling the recent pinctrl merge, I was surprised by how a
pinctrl-only pull request ended up rebuilding basically the whole
kernel.

The reason for that ended up being that  included
, so any change to that file ended up causing
pretty much every driver out there to be rebuilt.

The reason for that was because 'struct device' has this in it:

    #ifdef CONFIG_PINCTRL
        struct dev_pin_info     *pins;
    #endif

but we already avoid header includes for these kinds of things in that
header file, preferring to just use a forward-declaration of the
structure instead.  Exactly to avoid this kind of header dependency.

Since some drivers seem to expect that  header
to come in automatically, move the include to 
instead.  It might be better to just make the includes more targeted,
but I'm not going to review every driver.

It would definitely be good to have a tool for finding and minimizing
header dependencies automatically - or at least help with them.  Right
now we almost certainly end up having way too many of these things, and
it's hard to test every single configuration.

FWIW, you can get a sense of the "hotness" of a header file with something
like this after doing a full build:

    find . -name '.*.o.cmd' -print0 |
        xargs -0 tail --lines=+2 |
        grep -v 'wildcard ' |
        tr ' \\' '\n' |
        sort | uniq -c | sort -n | less -S

which isn't exact (there are other things in those '*.o.cmd' than just
the dependencies, and the "--lines=+2" only removes the header), but
might a useful approximation.

With this patch,  drops to "only" having 833
users in the current x86-64 allmodconfig.  In contrast, 
has 14857 build files including it directly or indirectly.

Of course, the headers that absolutely _everybody_ includes (things like
 etc) get a score of 23000+.

Cc: Linus Walleij 
Cc: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()

2017-04-06T23:08:08+00:00

Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.

Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.

To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().

Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed
work for hogs")
Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for
managing groups")
Cc: Haojian Zhuang 
Cc: Masahiro Yamada 
Cc: Mika Penttilä 
Cc: Mika Westerberg 
Cc: Nishanth Menon 
Cc: Shawn Guo 
Cc: Stefan Agner 
Tested-by: Geert Uytterhoeven 
Tested-by: Gary Bisson 
Tested-by: Fabio Estevam 
Signed-off-by: Tony Lindgren 
Signed-off-by: Linus Walleij