This reverts commit 8c58f1a7a4b6d1d723bf25fef9d842d5a11200d0.

It turns out that applying these generic properties was
premature: the properties used in the driver using this
are of unclear electrical nature and the subject need to
be discussed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.12 cycle.

  The extra week before the merge window actually resulted in some of
  the type of fixes that usually arrive after the merge window already
  starting to trickle in from eager developers using -next, I'm
  impressed.

  I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
  with the onset of Samsung patches. It works great.

  Apart from that it is a boring round, just incremental updates and
  fixes all over the place, no serious core changes or anything exciting
  like that. The most pleasing to see is Julia Cartwrights work to audit
  the irqchip-providing drivers for realtime locking compliance. It's
  one of those "I should really get around to looking into that" things
  that have been on my TODO list since forever.

  Summary:

  Core changes:

   - add bi-directional and output-enable pin configurations to the
     generic bindings and generic pin controlling core.

  New drivers or subdrivers:

   - Armada 37xx SoC pin controller and GPIO support.

   - Axis ARTPEC-6 SoC pin controller support.

   - AllWinner A64 R_PIO controller support, and opening up the
     AllWinner sunxi driver for ARM64 use.

   - Rockchip RK3328 support.

   - Renesas R-Car H3 ES2.0 support.

   - STM32F469 support in the STM32 driver.

   - Aspeed G4 and G5 pin controller support.

  Improvements:

   - a whole slew of realtime improvements to drivers implementing
     irqchips: BCM, AMD, SiRF, sunxi, rockchip.

   - switch meson driver to get the GPIO ranges from the device tree.

   - input schmitt trigger support on the Rockchip driver.

   - enable the sunxi (AllWinner) driver to also be used on ARM64
     silicon.

   - name the Qualcomm QDF2xxx GPIO lines.

   - support GMMR GPIO regions on the Intel Cherryview. This fixes a
     serialization problem on these platforms.

   - pad retention support for the Samsung Exynos 5433.

   - handle suspend-to-ram in the AT91-pio4 driver.

   - pin configuration support in the Aspeed driver.

  Cleanups:

   - the final name of Rockchip RK1108 was RV1108 so rename the driver
     and variables to stay consistent"

* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mediatek: Add missing pinctrl bindings for mt7623
  pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
  pinctrl: artpec6: Remove .owner field for driver
  pinctrl: tegra: xusb: Silence sparse warnings
  ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
  pinctrl: make artpec6 explicitly non-modular
  pinctrl: aspeed: g5: Add pinconf support
  pinctrl: aspeed: g4: Add pinconf support
  pinctrl: aspeed: Add core pinconf support
  pinctrl: aspeed: Document pinconf in devicetree bindings
  pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
  pinctrl: stm32: Add STM32F469 MCU support
  Documentation: dt: Remove ngpios from stm32-pinctrl binding
  pinctrl: stm32: replace device_initcall() with arch_initcall()
  pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
  pinctrl: armada-37xx: Add gpio support
  pinctrl: armada-37xx: Add pin controller support for Armada 37xx
  pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
  pinctrl: core: Make pinctrl_init_controller() static
  pinctrl: generic: Add bi-directional and output-enable
  ...

Add bi-directional and output-enable pin configuration properties.

bi-directional allows to specify when a pin shall operate in input and
output mode at the same time. This is particularly useful in platforms
where input and output buffers have to be manually enabled.

output-enable is just syntactic sugar to specify that a pin shall
operate in output mode, ignoring the provided argument.
This pairs with input-enable pin configuration option.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.

Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.

To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().

Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed
work for hogs")
Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for
managing groups")
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Currently we already have two pin configuration related callbacks
available for GPIO chips .set_single_ended() and .set_debounce(). In
future we expect to have even more, which does not scale well if we need
to add yet another callback to the GPIO chip structure for each possible
configuration parameter.

Better solution is to reuse what we already have available in the
generic pinconf.

To support this, we introduce a new .set_config() callback for GPIO
chips. The callback takes a single packed pin configuration value as
parameter. This can then be extended easily beyond what is currently
supported by just adding new types to the generic pinconf enum.

If the GPIO driver is backed up by a pinctrl driver the GPIO driver can
just assign gpiochip_generic_config() (introduced in this patch) to
.set_config and that will take care configuration requests are directed
to the pinctrl driver.

We then convert the existing drivers over .set_config() and finally
remove the .set_single_ended() and .set_debounce() callbacks.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When a GPIO driver is backed by a pinctrl driver the GPIO driver
sometimes needs to call the pinctrl driver to configure certain things,
like whether the pin is used as input or output. In addition to this
there are other configurations applicable to GPIOs such as setting
debounce time of the GPIO.

To support this we introduce a new function pinctrl_gpio_set_config()
that can be used by gpiolib based driver to pass configuration requests
to the backing pinctrl driver.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The current pinconf packed format allows only 16-bit argument limiting
the maximum value 65535. For most types this is enough. However,
debounce time can be in range of hundreths of milliseconds in case of
mechanical switches so we cannot represent the worst case using the
current format.

In order to support larger values change the packed format so that the
lower 8 bits are used as type which leaves 24 bits for the argument.
This allows representing values up to 16777215 and debounce times up to
16 seconds.

We also convert the existing users to use 32-bit integer when extracting
argument from the packed configuration value.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit df61b366af26 ("pinctrl: core: Use delayed work for hogs") caused a
regression at least with sh-pfc that is also a GPIO controller as
noted by Geert Uytterhoeven <geert@linux-m68k.org>.

As the original pinctrl_register() has issues calling pin controller
driver functions early before the controller has finished registering,
we can't just revert commit df61b366af26. That would break the drivers
using GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS.

So let's fix the issue with the following steps as a single patch:

1. Revert the late_init parts of commit df61b366af26.

   The late_init clearly won't work and we have to just give up
   on fixing pinctrl_register() for GENERIC_PINCTRL_GROUPS and
   GENERIC_PINMUX_FUNCTIONS.

2. Split pinctrl_register() into two parts

   By splitting pinctrl_register() into pinctrl_init_controller()
   and pinctrl_create_and_start() we have better control over when
   it's safe to call pinctrl_create().

3. Introduce a new pinctrl_register_and_init() function

   As suggested by Linus Walleij <linus.walleij@linaro.org>, we
   can just introduce a new function for the controllers that need
   pinctrl_create() called later.

4. Convert the four known problem cases to use new function

   Let's convert pinctrl-imx, pinctrl-single, sh-pfc and ti-iodelay
   to use the new function to fix the issues. The rest of the drivers
   can be converted later. Let's also update Documentation/pinctrl.txt
   accordingly because of the known issues with pinctrl_register().

Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The pinconf-generic.h file exposes functions for creating generic mappings
but it does not expose a function for freeing the mappings. Add a function
for freeing generic mappings.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>