Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.12-rc1.

  Lots of changes in here, primarily dominated by the usual IIO driver
  updates and additions, but there are also small driver subsystem
  updates all over the place. Included in here are:

   - lots and lots of new IIO drivers and updates to existing ones

   - interconnect subsystem updates and new drivers

   - nvmem subsystem updates and new drivers

   - mhi driver updates

   - power supply subsystem updates

   - kobj_type const work for many different small subsystems

   - comedi driver fix

   - coresight subsystem and driver updates

   - fpga subsystem improvements

   - slimbus fixups

   - binder new feature addition for "frozen" notifications

   - lots and lots of other small driver updates and cleanups

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
  greybus: gb-beagleplay: Add firmware upload API
  arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
  dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
  MAINTAINERS: Update path for U-Boot environment variables YAML
  nvmem: layouts: add U-Boot env layout
  comedi: ni_routing: tools: Check when the file could not be opened
  ocxl: Remove the unused declarations in headr file
  hpet: Fix the wrong format specifier
  uio: Constify struct kobj_type
  cxl: Constify struct kobj_type
  binder: modify the comment for binder_proc_unlock
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
  bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
  ...

Pull input updates from Dmitry Torokhov:

 - support for PixArt PS/2 touchpad

 - updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers

 - support for GPIO-only mode for ADP55888 controller

 - support for touch keys in Zinitix driver

 - support for querying density of Synaptics sensors

 - sysfs interface for Goodex "Berlin" devices to read and write touch
   IC registers

 - more quirks to i8042 to handle various Tuxedo laptops

 - a number of drivers have been converted to using "guard" notation
   when acquiring various locks, as well as using other cleanup
   functions to simplify releasing of resources (with more drivers to
   follow)

 - evdev will limit amount of data that can be written into an evdev
   instance at a given time to 4096 bytes (170 input events) to avoid
   holding evdev->mutex for too long and starving other users

 - Spitz has been converted to use software nodes/properties to describe
   its matrix keypad and GPIO-connected LEDs

 - msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
   removed since noone in mainline have been using them

 - other assorted cleanups and fixes

* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
  ARM: spitz: fix compile error when matrix keypad driver is enabled
  Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: adp5588-keys - fix check on return code
  Input: Convert comma to semicolon
  Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
  Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
  Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
  Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
  Input: ims-pcu - fix calling interruptible mutex
  Input: zforce_ts - switch to using asynchronous probing
  Input: zforce_ts - remove assert/deassert wrappers
  Input: zforce_ts - do not hardcode interrupt level
  Input: zforce_ts - switch to using devm_regulator_get_enable()
  Input: zforce_ts - stop treating VDD regulator as optional
  Input: zforce_ts - make zforce_idtable constant
  Input: zforce_ts - use dev_err_probe() where appropriate
  Input: zforce_ts - do not ignore errors when acquiring regulator
  Input: zforce_ts - make parsing of contacts less confusing
  Input: zforce_ts - switch to using get_unaligned_le16
  Input: zforce_ts - use guard notation when acquiring mutexes
  ...

Pull dmaengine updates from Vinod Koul:
 "Unusually, more new driver and device support than updates. Couple of
  new device support, AMD, Rcar, Intel and New drivers in Freescale,
  Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.

  New support:
   - Support for AMD Versal Gen 2 DMA IP
   - Rcar RZ/G3S SoC dma controller
   - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
   - Support for Freescale ls1021a-qdma controller
   - New driver for Loongson-1 APB DMA
   - New driver for AMD QDMA
   - Pl08x in LPC32XX router dma driver

  Updates:
   - Support for dpdma cyclic dma mode
   - XML conversion for marvell xor dma bindings
   - Dma clocks documentation for imx dma"

* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
  dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
  dmaengine: Fix spelling mistakes
  dmaengine: Add dma router for pl08x in LPC32XX SoC
  dmaengine: fsl-edma: add edma src ID check at request channel
  dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
  dmaengine: avoid non-constant format string
  dmaengine: imx-dma: Remove i.MX21 support
  dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
  dmaengine: Loongson1: Add Loongson-1 APB DMA driver
  dt-bindings: dma: Add Loongson-1 APB DMA
  dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
  dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
  dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
  dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
  dmaengine: ti: k3-udma: Remove unused declarations
  dmaengine: amd: qdma: Add AMD QDMA driver
  dmaengine: xilinx: dpdma: Add support for cyclic dma mode
  dma: ipu: Remove include/linux/dma/ipu-dma.h
  dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
  dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
  ...

Pull x86 platform drivers updates from Hans de Goede:

 - asus-wmi: Add support for vivobook fan profiles

 - dell-laptop: Add knobs to change battery charge settings

 - lg-laptop: Add operation region support

 - intel-uncore-freq: Add support for efficiency latency control

 - intel/ifs: Add SBAF test support

 - intel/pmc: Ignore all LTRs during suspend

 - platform/surface: Support for arm64 based Surface devices

 - wmi: Pass event data directly to legacy notify handlers

 - x86/platform/geode: switch GPIO buttons and LEDs to software
   properties

 - bunch of small cleanups, fixes, hw-id additions, etc.

* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
  MAINTAINERS: adjust file entry in INTEL MID PLATFORM
  platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
  platform/mellanox: mlxbf-pmc: fix lockdep warning
  platform/x86/amd: pmf: Add quirk for TUF Gaming A14
  platform/x86: touchscreen_dmi: add nanote-next quirk
  platform/x86: asus-wmi: don't fail if platform_profile already registered
  platform/x86: asus-wmi: add debug print in more key places
  platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
  platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
  MAINTAINERS: Add Intel MID section
  platform/x86: panasonic-laptop: Add support for programmable buttons
  platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
  platform/x86: intel/pmc: Ignore all LTRs during suspend
  platform/x86: wmi: Call both legacy and WMI driver notify handlers
  platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
  platform/x86: wmi: Remove wmi_get_event_data()
  platform/x86: wmi: Pass event data directly to legacy notify handlers
  platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
  platform/x86: x86-android-tablets: Fix spelling in the comments
  platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - driver for Sophgo SG2042 external hardware monitor
   - thermal sensor driver for Surface Aggregator Module

  Added support to existing drivers:
   - oxp-sensors: Support for multiple new devices.
   - nct6775: Added G15CF to ASUS WMI monitoring list

  Modernizations:
   - driver cleanup and update to use with_info API: ina2xx, lm92,
     lm95234, max1619, max1668, and max6697.

  API updates:
   - removed unused devm_hwmon_device_unregister() API function

  Other notable changes
   - implement and use generic bus access delay for pmbus drivers
   - use with scoped for each OF child loop in several drivers
   - module unloading fixes for gsc-hwmon and ntc_thermistor drivers
   - converted various drivers to use multi-byte regmap operations
   - adt7475: Improved devicetree based configuration
   - ltc2947: Move to firmware agnostic API
   - ltc2978: Converted devicetree description to yaml
   - max16065: Addressed overflows when writing limit attributes

  Various other minor cleanups, fixes and improvements"

* tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (96 commits)
  hwmon: Remove devm_hwmon_device_unregister() API function
  hwmon: (sch5636) Print unknown ID in error string via %*pE
  hwmon: (sht21) Use %*ph to print small buffer
  hwmon: (pmbus/mpq7932) Constify struct regulator_desc
  hwmon: pmbus: pli12096bc: Add write delay
  hwmon: pmbus: zl6100: Use generic code
  hwmon: pmbus: ucd9000: Use generic code
  hwmon: pmbus: max15301: Use generic code
  hwmon: pmbus: Implement generic bus access delay
  hwmon: (ina2xx) Use shunt voltage to calculate current
  hwmon: (ina2xx) Add support for current limits
  hwmon: (ina2xx) Pass register to alert limit write functions
  hwmon: (ina2xx) Convert to use with_info hwmon API
  hwmon: (ina2xx) Move ina2xx_get_value()
  hwmon: (ina2xx) Set alert latch
  hwmon: (ina2xx) Consolidate chip initialization code
  hwmon: (ina2xx) Fix various overflow issues
  hwmon: (ina2xx) Re-initialize chip using regmap functions
  hwmon: (ina2xx) Use local regmap pointer if used more than once
  hwmon: (ina2xx) Mark regmap_config as const
  ...

Pull gpio updates from Bartosz Golaszewski:
 "Core GPIOLIB:
   - provide and add users for a macro allowing to iterate over accepted
     GPIO property names of consumer device nodes
   - remove legacy definitions that are no longer used
   - put legacy GPIO devres helpers together with the rest of the
     deprecated code
   - implement and use swnode_gpio_get_reference(): a wrapper
     simplifying the underlying calls to
     fwnode_property_get_reference_args()
   - use IS_ERR_OR_NULL() where it makes sense
   - replace of_find_property() with of_property_present()
   - simplify code with the scoped variant of OF-node children iterator

  Documentation:
   - update GPIO kerneldocs with Return sections
   - fix "Excess struct member description" warnings now being triggered
     with W=1

  New drivers:
   - add support for Analog Devices ADP5585

  Driver improvements:
   - add support for wake-on-GPIO to gpio-mpc8xxx
   - use GPIO_LOOKUP_IDX() in gpio-virtuser
   - use devm_clk_get_[optional_]enabled() where applicable in several
     drivers
   - replace OF-specific functions with provider-agnostic alternatives
     where possible
   - drop support for legacy platform data from gpio-ath79 and
     gpio-davinci
   - refactor gpio-stmpe
   - improve error reporting in gpio-pca953x
   - add support for reading the direction of pins for some models to
     gpio-vf610

  DT bindings:
   - convert the bindings for nxp,lpc3220 to YAML
   - add gpio-reserved-ranges to gpio-davinci
   - simplify the GPIO hog schema
   - fix a GPIO hog issue in bindings for fcs,fxl6408

  Other:
   - fix format specifiers in user-space tools
   - remove leftover files on make clean in tools/gpio/"

* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
  gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
  gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
  gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
  gpio: lpc18xx: Use helper function devm_clk_get_enabled()
  gpio: cadence: Use helper function devm_clk_get_enabled()
  gpio: sama5d2-piobu: convert comma to semicolon
  gpio: mpc8xxx: order headers alphabetically
  gpio: davinci: use devm_clk_get_enabled()
  gpio: davinci: drop platform data support
  gpio: stmpe: Sort headers
  gpio: stmpe: Make use of device properties
  gpio: stmpe: Utilise temporary variable for struct device
  gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
  gpio: stmpe: Fix IRQ related error messages
  gpio: pch: kerneldoc fixes for excess members
  gpio: zynq: Simplify using devm_clk_get_enabled()
  gpio: mpc8xxx: Add wake on GPIO support
  gpio: syscon: fix excess struct member build warning
  gpio: stp-xway: Simplify using devm_clk_get_enabled()
  gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
  ...

Pull MTD updates from Miquel Raynal:
 "MTD changes:

   - No particularly important patchset this cycle, but we have a few
     usual improvements: like using a better/more recent helper or
     checking a return value.

  Raw NAND changes:

   - The use of for_each_child_of_node_scoped() has been spread into the
     subsystem drivers

   - a couple of exit path have been fixed (mtk, denali)

   - TI GPMC bindings have been enhanced to comply with up-to-date
     partition descriptions

   - a load of small and misc fixes

  SPI-NAND changes:

   - The most impacting series this cycle is bringing support for
     continuous reads in the SPI-NAND subsystem.

     This is a feature already merged in the raw NAND subsystem which
     allows optimizing the internal fetch times in the chip while
     reading sequential pages within an eraseblock.

     For now only Macronix NANDs benefit from this feature. While we are
     talking about Macronix, some of their chip need an explicit action
     for selecting a different plane, and support for it has also been
     brought.

   - The bitflip threshold has also been set to the same arbitrary level
     as in the raw NAND subsystem to optimize wear leveling decisions

   - Add upport for a new Winbond chip

  SPI NOR changes:

   - Add Write Protect support for N25Q064A.

   - New flash support for Zetta ZD25Q128C and Spansion S28HS256T.

   - Fix a NULL dereference in probe path for flashes without a name.

     The probe path tries to access the name without checking its
     existence first. S28HS256T is the first flash to define its entry
     without a name, uncovering this issue"

* tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits)
  mtd: spi-nor: fix flash probing
  mtd: spi-nor: spansion: Add support for S28HS256T
  mtd: spi-nor: winbond: add Zetta ZD25Q128C support
  mtd: spi-nor: micron-st: Add n25q064a WP support
  mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`
  mtd: spinand: macronix: Flag parts needing explicit plane select
  mtd: spinand: Add support for setting plane select bits
  dt-bindings: mtd: ti, gpmc-nand: support partitions node
  mtd: rawnand: mtk: Fix init error path
  mtd: powernv: Add check devm_kasprintf() returned value
  mtd: rawnand: mtk: Factorize out the logic cleaning mtk chips
  mtd: rawnand: atmel: Add message on DMA usage
  mtd: rawnand: meson: Fix typo in function name
  mtd: spi-nand: macronix: Continuous read support
  mtd: spi-nand: macronix: Add a possible bitflip status flag
  mtd: spi-nand: macronix: Extract the bitflip retrieval logic
  mtd: spi-nand: macronix: Fix helper name
  mtd: spi-nand: Expose spinand_write_reg_op()
  mtd: spi-nand: Add continuous read support
  mtd: spi-nand: Isolate the MTD read logic in a helper
  ...

Pull SoC driver updates from Arnd Bergmann:
 "The driver updates seem larger this time around, with changes is many
  of the SoC specific drivers, both the custom drivers/soc ones and the
  closely related subsystems (memory, bus, firmware, reset, ...).

  The at91 platform gains support for sam9x7 chips in the soc and power
  management code. This is the latest variant of one of the oldest still
  supported SoC families, using the ARM9 (ARMv5) core.

  As usual, the qualcomm snapdragon platform gets a ton of updates in
  many of their drivers to add more features and additional SoC support.
  Most of these are somewhat firmware related as the platform has a
  number of firmware based interfaces to the kernel. A notable addition
  here is the inclusion of trace events to two of these drivers.

  Herve Codina and Christophe Leroy are now sending updates for
  drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
  and Arm specific platforms and has previously been problematic to
  maintain. The first update here contains support for newer PowerPC
  variants and some cleanups.

  The turris mox firmware driver has a number of updates, mostly
  cleanups.

  The Arm SCMI firmware driver gets a major rework to modularize the
  existing code into separately loadable drivers for the various
  transports, the addition of custom NXP i.MX9 interfaces and a number
  of smaller updates.

  The Arm FF-A firmware driver gets a feature update to support the v1.2
  version of the specification.

  The reset controller drivers have some smaller cleanups and a newly
  added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.

  The memory controller drivers get some cleanups and refactoring for
  Tegra, TI, Freescale/NXP and a couple more platforms.

  Finally there are lots of minor updates to firmware (raspberry pi,
  tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
  amlogic, mediatek) drivers and their DT bindings"

* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
  firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
  platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
  bus: sunxi-rsb: Simplify code with dev_err_probe()
  soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
  soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
  dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
  soc: fsl: qbman: Remove redundant warnings
  soc: fsl: qbman: Use iommu_paging_domain_alloc()
  MAINTAINERS: Add QE files related to the Freescale QMC controller
  soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
  soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
  soc: fsl: qe: Add missing PUSHSCHED command
  soc: fsl: qe: Add resource-managed muram allocators
  soc: fsl: cpm1: qmc: Introduce qmc_version
  soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
  soc: fsl: cpm1: qmc: Handle RPACK initialization
  soc: fsl: cpm1: qmc: Rename qmc_chan_command()
  soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
  soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
  soc: fsl: cpm1: qmc: Re-order probe() operations
  ...

Cross-merge networking fixes after downstream PR.

No conflicts (sort of) and no adjacent changes.

This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>