linux-toradex.git/include/linux/power_supply.h, branch v5.1-rc3 Linux kernel for Apalis and Colibri modules power: supply: core: Add a field to support battery max voltage 2019-02-19T23:33:08+00:00 Artur Rojek contact@artur-rojek.eu 2019-02-17T14:29:11+00:00 04fb53101edef67517f2d5dc00c1a5eb707fe101 Add a field for "voltage_max_design_uv" to present fully charged battery voltage. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
Add a field for "voltage_max_design_uv" to present fully charged
battery voltage.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power: supply: core: add support for custom sysfs attributes 2018-12-12T23:15:06+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2018-09-27T13:46:03+00:00 cef8fe6a382cb556b590269e9d1dfc0241014903 Add functionality to setup device specific sysfs attributes in a race condition free manner Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
Add functionality to setup device specific sysfs attributes
in a race condition free manner

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power: supply: core: Add some helpers to use the battery OCV capacity table 2018-11-09T21:55:46+00:00 Baolin Wang baolin.wang@linaro.org 2018-11-05T07:39:09+00:00 3afb50d7125bcdbf71df843134e96ceffc78c8b8 We have introduced some battery properties to present the OCV table temperatures and OCV capacity table values. Thus this patch add OCV temperature and OCV table for battery information, as well as providing some helper functions to use the OCV capacity table for users. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
We have introduced some battery properties to present the OCV table
temperatures and OCV capacity table values. Thus this patch add OCV
temperature and OCV table for battery information, as well as providing
some helper functions to use the OCV capacity table for users.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power: supply: core: Add one field to present the battery internal resistance 2018-11-09T21:55:46+00:00 Baolin Wang baolin.wang@linaro.org 2018-11-05T07:39:07+00:00 86131d933f9a9502d877fb37b90a856e6a8a7ed8 Add one field for 'struct power_supply_battery_info' to present the battery factory internal resistance. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
Add one field for 'struct power_supply_battery_info' to present the battery
factory internal resistance.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power: remove possible deadlock when unregistering power_supply 2018-07-06T14:03:21+00:00 Benjamin Tissoires benjamin.tissoires@redhat.com 2018-06-25T07:51:48+00:00 3ffa6583e24e1ad1abab836d24bfc9d2308074e5 If a device gets removed right after having registered a power_supply node, we might enter in a deadlock between the remove call (that has a lock on the parent device) and the deferred register work. Allow the deferred register work to exit without taking the lock when we are in the remove state. Stack trace on a Ubuntu 16.04: [16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds. [16072.109127] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109132] kworker/u16:2 D 0 1180 2 0x80000000 [16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work [16072.109144] Call Trace: [16072.109152] __schedule+0x3d6/0x8b0 [16072.109155] schedule+0x36/0x80 [16072.109158] schedule_preempt_disabled+0xe/0x10 [16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0 [16072.109166] __mutex_lock_slowpath+0x13/0x20 [16072.109168] ? __mutex_lock_slowpath+0x13/0x20 [16072.109171] mutex_lock+0x2f/0x40 [16072.109174] power_supply_deferred_register_work+0x2b/0x50 [16072.109179] process_one_work+0x15b/0x410 [16072.109182] worker_thread+0x4b/0x460 [16072.109186] kthread+0x10c/0x140 [16072.109189] ? process_one_work+0x410/0x410 [16072.109191] ? kthread_create_on_node+0x70/0x70 [16072.109194] ret_from_fork+0x35/0x40 [16072.109199] INFO: task test:2257 blocked for more than 120 seconds. [16072.109202] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109206] test D 0 2257 2256 0x00000004 [16072.109208] Call Trace: [16072.109211] __schedule+0x3d6/0x8b0 [16072.109215] schedule+0x36/0x80 [16072.109218] schedule_timeout+0x1f3/0x360 [16072.109221] ? check_preempt_curr+0x5a/0xa0 [16072.109224] ? ttwu_do_wakeup+0x1e/0x150 [16072.109227] wait_for_completion+0xb4/0x140 [16072.109230] ? wait_for_completion+0xb4/0x140 [16072.109233] ? wake_up_q+0x70/0x70 [16072.109236] flush_work+0x129/0x1e0 [16072.109240] ? worker_detach_from_pool+0xb0/0xb0 [16072.109243] __cancel_work_timer+0x10f/0x190 [16072.109247] ? device_del+0x264/0x310 [16072.109250] ? __wake_up+0x44/0x50 [16072.109253] cancel_delayed_work_sync+0x13/0x20 [16072.109257] power_supply_unregister+0x37/0xb0 [16072.109260] devm_power_supply_release+0x11/0x20 [16072.109263] release_nodes+0x110/0x200 [16072.109266] devres_release_group+0x7c/0xb0 [16072.109274] wacom_remove+0xc2/0x110 [wacom] [16072.109279] hid_device_remove+0x6e/0xd0 [hid] [16072.109284] device_release_driver_internal+0x158/0x210 [16072.109288] device_release_driver+0x12/0x20 [16072.109291] bus_remove_device+0xec/0x160 [16072.109293] device_del+0x1de/0x310 [16072.109298] hid_destroy_device+0x27/0x60 [hid] [16072.109303] usbhid_disconnect+0x51/0x70 [usbhid] [16072.109308] usb_unbind_interface+0x77/0x270 [16072.109311] device_release_driver_internal+0x158/0x210 [16072.109315] device_release_driver+0x12/0x20 [16072.109318] usb_driver_release_interface+0x77/0x80 [16072.109321] proc_ioctl+0x20f/0x250 [16072.109325] usbdev_do_ioctl+0x57f/0x1140 [16072.109327] ? __wake_up+0x44/0x50 [16072.109331] usbdev_ioctl+0xe/0x20 [16072.109336] do_vfs_ioctl+0xa4/0x600 [16072.109339] ? vfs_write+0x15a/0x1b0 [16072.109343] SyS_ioctl+0x79/0x90 [16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab [16072.109349] RIP: 0033:0x7f20da807f47 [16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47 [16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009 [16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010 [16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000 [16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000 Reported-and-tested-by: Richard Hughes <rhughes@redhat.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Fixes: 7f1a57fdd6cb ("power_supply: Fix possible NULL pointer dereference on early uevent") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
If a device gets removed right after having registered a power_supply node,
we might enter in a deadlock between the remove call (that has a lock on
the parent device) and the deferred register work.

Allow the deferred register work to exit without taking the lock when
we are in the remove state.

Stack trace on a Ubuntu 16.04:

[16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds.
[16072.109127]       Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109132] kworker/u16:2   D    0  1180      2 0x80000000
[16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work
[16072.109144] Call Trace:
[16072.109152]  __schedule+0x3d6/0x8b0
[16072.109155]  schedule+0x36/0x80
[16072.109158]  schedule_preempt_disabled+0xe/0x10
[16072.109161]  __mutex_lock.isra.2+0x2ab/0x4e0
[16072.109166]  __mutex_lock_slowpath+0x13/0x20
[16072.109168]  ? __mutex_lock_slowpath+0x13/0x20
[16072.109171]  mutex_lock+0x2f/0x40
[16072.109174]  power_supply_deferred_register_work+0x2b/0x50
[16072.109179]  process_one_work+0x15b/0x410
[16072.109182]  worker_thread+0x4b/0x460
[16072.109186]  kthread+0x10c/0x140
[16072.109189]  ? process_one_work+0x410/0x410
[16072.109191]  ? kthread_create_on_node+0x70/0x70
[16072.109194]  ret_from_fork+0x35/0x40
[16072.109199] INFO: task test:2257 blocked for more than 120 seconds.
[16072.109202]       Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu
[16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[16072.109206] test            D    0  2257   2256 0x00000004
[16072.109208] Call Trace:
[16072.109211]  __schedule+0x3d6/0x8b0
[16072.109215]  schedule+0x36/0x80
[16072.109218]  schedule_timeout+0x1f3/0x360
[16072.109221]  ? check_preempt_curr+0x5a/0xa0
[16072.109224]  ? ttwu_do_wakeup+0x1e/0x150
[16072.109227]  wait_for_completion+0xb4/0x140
[16072.109230]  ? wait_for_completion+0xb4/0x140
[16072.109233]  ? wake_up_q+0x70/0x70
[16072.109236]  flush_work+0x129/0x1e0
[16072.109240]  ? worker_detach_from_pool+0xb0/0xb0
[16072.109243]  __cancel_work_timer+0x10f/0x190
[16072.109247]  ? device_del+0x264/0x310
[16072.109250]  ? __wake_up+0x44/0x50
[16072.109253]  cancel_delayed_work_sync+0x13/0x20
[16072.109257]  power_supply_unregister+0x37/0xb0
[16072.109260]  devm_power_supply_release+0x11/0x20
[16072.109263]  release_nodes+0x110/0x200
[16072.109266]  devres_release_group+0x7c/0xb0
[16072.109274]  wacom_remove+0xc2/0x110 [wacom]
[16072.109279]  hid_device_remove+0x6e/0xd0 [hid]
[16072.109284]  device_release_driver_internal+0x158/0x210
[16072.109288]  device_release_driver+0x12/0x20
[16072.109291]  bus_remove_device+0xec/0x160
[16072.109293]  device_del+0x1de/0x310
[16072.109298]  hid_destroy_device+0x27/0x60 [hid]
[16072.109303]  usbhid_disconnect+0x51/0x70 [usbhid]
[16072.109308]  usb_unbind_interface+0x77/0x270
[16072.109311]  device_release_driver_internal+0x158/0x210
[16072.109315]  device_release_driver+0x12/0x20
[16072.109318]  usb_driver_release_interface+0x77/0x80
[16072.109321]  proc_ioctl+0x20f/0x250
[16072.109325]  usbdev_do_ioctl+0x57f/0x1140
[16072.109327]  ? __wake_up+0x44/0x50
[16072.109331]  usbdev_ioctl+0xe/0x20
[16072.109336]  do_vfs_ioctl+0xa4/0x600
[16072.109339]  ? vfs_write+0x15a/0x1b0
[16072.109343]  SyS_ioctl+0x79/0x90
[16072.109347]  entry_SYSCALL_64_fastpath+0x24/0xab
[16072.109349] RIP: 0033:0x7f20da807f47
[16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47
[16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009
[16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010
[16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000
[16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000

Reported-and-tested-by: Richard Hughes <rhughes@redhat.com>
Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes: 7f1a57fdd6cb ("power_supply: Fix possible NULL pointer dereference on early uevent")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: supply: Add fwnode pointer to power_supply_config struct 2018-05-24T16:14:27+00:00 Adam Thomson Adam.Thomson.Opensource@diasemi.com 2018-05-22T15:16:23+00:00 ece711b5a42ce9b99a2a3706c56bf70a5425a7bf To allow users of the power supply framework to be hw description agnostic, this commit adds the ability to pass a fwnode pointer, via the power_supply_config structure, to the initialisation code of the core, instead of explicitly specifying of_ndoe. If that fwnode pointer is provided then it will automatically resolve down to of_node on platforms which support it, otherwise it will be NULL. In the future, when ACPI support is added, this can be modified to accommodate ACPI without the need to change calling code which already provides the fwnode handle in this manner. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
To allow users of the power supply framework to be hw description
agnostic, this commit adds the ability to pass a fwnode pointer,
via the power_supply_config structure, to the initialisation code
of the core, instead of explicitly specifying of_ndoe. If that
fwnode pointer is provided then it will automatically resolve down
to of_node on platforms which support it, otherwise it will be NULL.

In the future, when ACPI support is added, this can be modified to
accommodate ACPI without the need to change calling code which
already provides the fwnode handle in this manner.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: supply: Add 'usb_type' property and supporting code 2018-04-25T12:17:48+00:00 Adam Thomson Adam.Thomson.Opensource@diasemi.com 2018-04-23T14:10:59+00:00 cf45004195efea6b479a1d710d6fc21c2b19353e This commit adds the 'usb_type' property to represent USB supplies which can report a number of different types based on a connection event. Examples of this already exist in drivers whereby the existing 'type' property is updated, based on an event, to represent what was connected (e.g. USB, USB_DCP, USB_ACA, ...). Current implementations however don't show all supported connectable types, so this knowledge has to be exlicitly known for each driver that supports this. The 'usb_type' property is intended to fill this void and show users all possible USB types supported by a driver. The property, when read, shows all available types for the driver, and the one currently chosen is highlighted/bracketed. It is expected that the 'type' property would then just show the top-level type 'USB', and this would be static. Currently the 'usb_type' enum contains all of the USB variant types that exist for the 'type' enum at this time, and in addition has SDP and PPS types. The mirroring is intentional so as to not impact existing usage of the 'type' property. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This commit adds the 'usb_type' property to represent USB supplies
which can report a number of different types based on a connection
event.

Examples of this already exist in drivers whereby the existing 'type'
property is updated, based on an event, to represent what was
connected (e.g. USB, USB_DCP, USB_ACA, ...). Current implementations
however don't show all supported connectable types, so this knowledge
has to be exlicitly known for each driver that supports this.

The 'usb_type' property is intended to fill this void and show users
all possible USB types supported by a driver. The property, when read,
shows all available types for the driver, and the one currently chosen
is highlighted/bracketed. It is expected that the 'type' property
would then just show the top-level type 'USB', and this would be
static.

Currently the 'usb_type' enum contains all of the USB variant types
that exist for the 'type' enum at this time, and in addition has
SDP and PPS types. The mirroring is intentional so as to not impact
existing usage of the 'type' property.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: add to_power_supply macro to the API 2018-02-21T22:27:13+00:00 Ognjen Galic smclt30p@gmail.com 2018-02-07T14:58:27+00:00 285995d15d3b1725d021a8a274e55f2ce30ccfa0 This patch adds the to_power_supply macro to upcast a device to a power_supply struct. This is needed because the same piece of code using container_of is used in various other places, so we abstract away such low-level operations via a macro. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ognjen Galic <smclt30p@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
This patch adds the to_power_supply macro to upcast
a device to a power_supply struct.

This is needed because the same piece of code using
container_of is used in various other places, so we
abstract away such low-level operations via a macro.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ognjen Galic <smclt30p@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
power: supply: Add power_supply_set_input_current_limit_from_supplier helper 2017-08-29T10:24:52+00:00 Hans de Goede hdegoede@redhat.com 2017-08-15T20:04:56+00:00 c3142dd8bedb8b78ee13c885dd92093fc8a50277 On some devices the USB Type-C port power (USB PD 2.0) negotiation is done by a separate port-controller IC, while the current limit is controlled through another (charger) IC. It has been decided to model this by modelling the external Type-C power brick (adapter/charger) as a power-supply class device which supplies the charger-IC, with its voltage-now and current-max representing the negotiated voltage and max current draw. This commit adds a power_supply_set_input_current_limit_from_supplier helper function which charger power-supply drivers can call to get the max-current from their supplier and have this applied through their set_property call-back to their input-current-limit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
On some devices the USB Type-C port power (USB PD 2.0) negotiation is
done by a separate port-controller IC, while the current limit is
controlled through another (charger) IC.

It has been decided to model this by modelling the external Type-C
power brick (adapter/charger) as a power-supply class device which
supplies the charger-IC, with its voltage-now and current-max representing
the negotiated voltage and max current draw.

This commit adds a power_supply_set_input_current_limit_from_supplier
helper function which charger power-supply drivers can call to get
the max-current from their supplier and have this applied
through their set_property call-back to their input-current-limit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: supply: core: Add power_supply_prop_precharge 2017-06-08T14:29:28+00:00 Liam Breck kernel@networkimprov.net 2017-06-07T18:37:52+00:00 413de34ab93edc80ef710c54ceb0987b8496aef3 Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT
Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT

Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>