linux-toradex.git/include/linux/ptrace.h, branch v3.2.70

ptrace,x86: force IRET path after a ptrace_stop()

2014-07-11T12:33:59+00:00

commit b9cd18de4db3c9ffa7e17b0dc0ca99ed5aa4d43a upstream.

The 'sysret' fastpath does not correctly restore even all regular
registers, much less any segment registers or reflags values.  That is
very much part of why it's faster than 'iret'.

Normally that isn't a problem, because the normal ptrace() interface
catches the process using the signal handler infrastructure, which
always returns with an iret.

However, some paths can get caught using ptrace_event() instead of the
signal path, and for those we need to make sure that we aren't going to
return to user space using 'sysret'.  Otherwise the modifications that
may have been done to the register set by the tracer wouldn't
necessarily take effect.

Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from
arch_ptrace_stop_needed() which is invoked from ptrace_stop().

Signed-off-by: Tejun Heo 
Reported-by: Andy Lutomirski 
Acked-by: Oleg Nesterov 
Suggested-by: Linus Torvalds 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

ptrace: fix fork event messages across pid namespaces

2014-07-11T12:33:47+00:00

commit 4e52365f279564cef0ddd41db5237f0471381093 upstream.

When tracing a process in another pid namespace, it's important for fork
event messages to contain the child's pid as seen from the tracer's pid
namespace, not the parent's.  Otherwise, the tracer won't be able to
correlate the fork event with later SIGTRAP signals it receives from the
child.

We still risk a race condition if a ptracer from a different pid
namespace attaches after we compute the pid_t value.  However, sending a
bogus fork event message in this unlikely scenario is still a vast
improvement over the status quo where we always send bogus fork event
messages to debuggers in a different pid namespace than the forking
process.

Signed-off-by: Matthew Dempsky 
Acked-by: Oleg Nesterov 
Cc: Kees Cook 
Cc: Julien Tinnes 
Cc: Roland McGrath 
Cc: Jan Kratochvil 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED

2011-07-17T18:23:52+00:00

The fake SIGSTOP during attach has numerous problems. PTRACE_SEIZE
is already fine, but we have basically the same problems is SIGSTOP
is sent on auto-attach, the tracer can't know if this signal signal
should be cancelled or not.

Change ptrace_event() to set JOBCTL_TRAP_STOP if the new child is
PT_SEIZED, this triggers the PTRACE_EVENT_STOP report.

Thereafter a PT_SEIZED task can never report the bogus SIGSTOP.

Test-case:

	#define PTRACE_SEIZE		0x4206
	#define PTRACE_SEIZE_DEVEL	0x80000000
	#define PTRACE_EVENT_STOP	7
	#define WEVENT(s)		((s & 0xFF0000) >> 16)

	int main(void)
	{
		int child, grand_child, status;
		long message;

		child = fork();
		if (!child) {
			kill(getpid(), SIGSTOP);
			fork();
			assert(0);
			return 0x23;
		}

		assert(ptrace(PTRACE_SEIZE, child, 0,PTRACE_SEIZE_DEVEL) == 0);
		assert(wait(&status) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP);

		assert(ptrace(PTRACE_SETOPTIONS, child, 0, PTRACE_O_TRACEFORK) == 0);

		assert(ptrace(PTRACE_CONT, child, 0,0) == 0);
		assert(waitpid(child, &status, 0) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_FORK);

		assert(ptrace(PTRACE_GETEVENTMSG, child, 0, &message) == 0);
		grand_child = message;

		assert(waitpid(grand_child, &status, 0) == grand_child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_STOP);

		kill(child, SIGKILL);
		kill(grand_child, SIGKILL);
		return 0;
	}

Signed-off-by: Oleg Nesterov 
Acked-by: Tejun Heo

ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()

2011-07-17T18:23:51+00:00

If the new child is traced, do_fork() adds the pending SIGSTOP.
It assumes that either it is traced because of auto-attach or the
tracer attached later, in both cases sigaddset/set_thread_flag is
correct even if SIGSTOP is already pending.

Now that we have PTRACE_SEIZE this is no longer right in the latter
case. If the tracer does PTRACE_SEIZE after copy_process() makes the
child visible the queued SIGSTOP is wrong.

We could check PT_SEIZED bit and change ptrace_attach() to set both
PT_PTRACED and PT_SEIZED bits simultaneously but see the next patch,
we need to know whether this child was auto-attached or not anyway.

So this patch simply moves this code to ptrace_init_task(), this
way we can never race with ptrace_attach().

Signed-off-by: Oleg Nesterov 
Acked-by: Tejun Heo

ptrace_init_task: initialize child->jobctl explicitly

2011-07-17T18:23:51+00:00

new_child->jobctl is not initialized during the fork, it is copied
from parent->jobctl. Currently this is harmless, the forking task
is running and copy_process() can't succeed if signal_pending() is
true, so only JOBCTL_STOP_DEQUEUED can be copied. Still this is a
bit fragile, it would be more clean to set ->jobctl = 0 explicitly.

Also, check ->ptrace != 0 instead of PT_PTRACED, move the
CONFIG_HAVE_HW_BREAKPOINT code up.

Signed-off-by: Oleg Nesterov 
Acked-by: Tejun Heo

ptrace: ptrace_reparented() should check same_thread_group()

2011-06-27T18:30:10+00:00

ptrace_reparented() naively does parent != real_parent, this means
it returns true even if the tracer _is_ the real parent. This is per
process thing, not per-thread. The only reason ->real_parent can
point to the non-leader thread is that we have __WNOTHREAD.

Change it to check !same_thread_group(parent, real_parent).

It has two callers, and in both cases the current check does not
look right.

exit_notify: we should respect ->exit_signal if the exiting leader
is traced by any thread from the parent thread group. It is the
child of the whole group, and we are going to send the signal to
the whole group.

wait_task_zombie: without __WNOTHREAD do_wait() should do the same
for any thread, only sys_ptrace() is "bound" to the single thread.
However do_wait(WEXITED) succeeds but does not release a traced
natural child unless the caller is the tracer.

Test-case:

	void *tfunc(void *arg)
	{
		assert(ptrace(PTRACE_ATTACH, (long)arg, 0,0) == 0);
		pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t thr;
		pid_t pid, stat, ret;

		pid = fork();
		if (!pid) {
			pause();
			assert(0);
		}

		assert(pthread_create(&thr, NULL, tfunc, (void*)(long)pid) == 0);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSTOPPED(stat));

		kill(pid, SIGKILL);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSIGNALED(stat) && WTERMSIG(stat) == SIGKILL);

		ret = waitpid(pid, &stat, 0);
		if (ret < 0)
			return 0;

		printf("WTF? %d is dead, but: wait=%d stat=%x\n",
				pid, ret, stat);

		return 1;
	}

Note that the main thread simply does

	pid = fork();
	kill(pid, SIGKILL);

and then without the patch wait4(WEXITED) succeeds twice and reports
WTERMSIG(stat) == SIGKILL.

Signed-off-by: Oleg Nesterov 
Acked-by: Tejun Heo

ptrace: s/tracehook_tracer_task()/ptrace_parent()/

2011-06-22T17:26:29+00:00

tracehook.h is on the way out.  Rename tracehook_tracer_task() to
ptrace_parent() and move it from tracehook.h to ptrace.h.

Signed-off-by: Tejun Heo 
Cc: Christoph Hellwig 
Cc: John Johansen 
Cc: Stephen Smalley 
Signed-off-by: Oleg Nesterov

ptrace: move SIGTRAP on exec(2) logic to ptrace_event()

2011-06-22T17:26:28+00:00

Move SIGTRAP on exec(2) logic from tracehook_report_exec() to
ptrace_event().  This is part of changes to make ptrace_event()
smarter and handle ptrace event related details in one place.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo 
Signed-off-by: Oleg Nesterov

ptrace: introduce ptrace_event_enabled() and simplify ptrace_event() and tracehook_prepare_clone()

2011-06-22T17:26:28+00:00

This patch implements ptrace_event_enabled() which tests whether a
given PTRACE_EVENT_* is enabled and use it to simplify ptrace_event()
and tracehook_prepare_clone().

PT_EVENT_FLAG() macro is added which calculates PT_TRACE_* flag from
PTRACE_EVENT_*.  This is used to define PT_TRACE_* flags and by
ptrace_event_enabled() to find the matching flag.

This is used to make ptrace_event() and tracehook_prepare_clone()
simpler.

* ptrace_event() callers were responsible for providing mask to test
  whether the event was enabled.  This patch implements
  ptrace_event_enabled() and make ptrace_event() drop @mask and
  determine whether the event is enabled from @event.  Note that
  @event is constant and this conversion doesn't add runtime overhead.

  All conversions except tracehook_report_clone_complete() are
  trivial.  tracehook_report_clone_complete() used to use 0 for @mask
  (always enabled) but now tests whether the specified event is
  enabled.  This doesn't cause any behavior difference as it's
  guaranteed that the event specified by @trace is enabled.

* tracehook_prepare_clone() now only determines which event is
  applicable and use ptrace_event_enabled() for enable test.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo 
Signed-off-by: Oleg Nesterov

ptrace: kill task_ptrace()

2011-06-22T17:26:27+00:00

task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion.  Kill it and directly access
->ptrace instead.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo 
Signed-off-by: Oleg Nesterov