linux-toradex.git/include/linux/qed/qed_eth_if.h, branch v5.0

qed/qede: Multi CoS support.

2018-08-09T21:05:30+00:00

This patch adds support for tc mqprio offload,
using this different traffic classes on the adapter
can be utilized based on configured priority to tc map.

For example -

tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3

This will cause SKBs with priority 0,1,2,3 to transmit
over tc 0,1,2,3 hardware queues respectively.

Signed-off-by: Manish Chopra 
Signed-off-by: Ariel Elior 
Signed-off-by: David S. Miller

qed*: Support drop action classification

2018-05-25T20:10:42+00:00

With this patch, User can configure for the supported
flows to be dropped. Added a stat "gft_filter_drop"
as well to be populated in ethtool for the dropped flows.

For example -

ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1
ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1

Signed-off-by: Manish Chopra 
Signed-off-by: Shahed Shaikh 
Signed-off-by: Ariel Elior 
Signed-off-by: David S. Miller

qed*: Support other classification modes.

2018-05-25T20:10:42+00:00

Currently, driver supports flow classification to PF
receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip,
src_port, dst_port] only.

This patch enables to configure different flow profiles
[For example - only UDP dest port or src_ip based] on the
adapter so that classification can be done according to
just those fields as well. Although, at a time just one
type of flow configuration is supported due to limited
number of flow profiles available on the device.

For example -

ethtool -N enp7s0f0 flow-type udp4 dst-port 45762 action 2
ethtool -N enp7s0f0 flow-type tcp4 src-ip 192.16.4.10 action 1
ethtool -N enp7s0f0 flow-type udp6 dst-port 45762 action 3

Signed-off-by: Manish Chopra 
Signed-off-by: Shahed Shaikh 
Signed-off-by: Ariel Elior 
Signed-off-by: David S. Miller

qed* : Add new TLV to request PF to update MAC in bulletin board

2018-04-20T15:26:37+00:00

There may be a need for VF driver to request PF to explicitly update its
bulletin with a MAC address.
e.g. When user assigns a MAC address to VF while VF is still down,
and PF's bulletin board contains different MAC address, in this case,
when VF's interface is brought up, it gets loaded with MAC address from
bulletin board which is not desirable.

To handle this corner case, we need a new TLV to request PF to update
its bulletin board with suggested MAC.

This request will be honored only for trusted VFs.

Signed-off-by: Shahed Shaikh 
Signed-off-by: David S. Miller

qed*: Utilize FW 8.33.1.0

2018-01-02T18:59:16+00:00

Advance the qed* drivers to use firmware 8.33.1.0:
Modify core driver (qed) to utilize the new FW and initialize the device
with it. This is the lion's share of the patch, and includes changes to FW
interface files, device initialization flows, FW interaction flows, and
debug collection flows.
Modify Ethernet driver (qede) to make use of new FW in fastpath.
Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath.
Modify FCoE driver (qedf) to make use of new FW in fastpath.
Modify iSCSI driver (qedi) to make use of new FW in fastpath.

Signed-off-by: Ariel Elior 
Signed-off-by: Michal Kalderon 
Signed-off-by: Yuval Bason 
Signed-off-by: Ram Amrani 
Signed-off-by: Manish Chopra 
Signed-off-by: Chad Dupuis 
Signed-off-by: Manish Rangankar 
Signed-off-by: Tomer Tayar 
Signed-off-by: David S. Miller

qed: Read per queue coalesce from hardware

2017-07-27T07:05:22+00:00

Retrieve the actual coalesce value from hardware for every Rx/Tx
queue, instead of Rx/Tx coalesce value cached during set coalesce.

Signed-off-by: Rahul Verma 
Signed-off-by: Yuval Mintz 
Signed-off-by: David S. Miller

qed: VF XDP support

2017-06-05T03:08:31+00:00

The final addition on the qed front -
 - VFs would now require their PFs to provide multiple CIDs
 - Based on the availability of connections from PF, determine whether
   XDP is feasible and share it with qede via dev_info.

Signed-off-by: Yuval Mintz 
Signed-off-by: David S. Miller

qed*: L2 interface to use the SB structures directly

2017-06-05T03:08:30+00:00

Part of an effort of a cleaner seperation between qed and the protocol
drivers, the L2 interface is to use the SB structure for initialization
purposes opaquely.

Signed-off-by: Yuval Mintz 
Signed-off-by: David S. Miller

qed*: Fix issues in the ptp filter config implementation.

2017-05-02T19:33:01+00:00

PTP hardware filter configuration performed by the driver for a given
user requested config is not correct for some of the PTP modes.
Following changes are needed for PTP config-filter implementation.
 1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables
    TimeSync/"V1 frame format support"/"V2 frame format support" on
    the TX side. Set the associated bits based on the user request.
 2. ptp4l application fails to operate in Peer Delay mode. Following
    changes are needed to fix this,
    a. Driver should enable (set to 0) DA #1-related bits for IPv4,
       IPv6 and MAC destination addresses in these registers:
         NIG_REG_TX_LLH_PTP_RULE_MASK
         NIG_REG_LLH_PTP_RULE_MASK
    b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should
       be set to 0x0 in all modes.

Signed-off-by: Sudarsana Reddy Kalluru 
Signed-off-by: Yuval Mintz 
Signed-off-by: David S. Miller

qed/qede: Add UDP ports in bulletin board

2017-04-25T15:49:31+00:00

This patch adds support for UDP ports in bulletin board
to notify UDP ports change to the VFs

Signed-off-by: Manish Chopra 
Signed-off-by: Yuval Mintz 
Signed-off-by: David S. Miller