linux-toradex.git/include/linux/regulator/machine.h, branch v4.18-rc4

regulator: core: Parse coupled regulators properties

2018-05-17T07:05:48+00:00

On Odroid XU3/4 and other Exynos5422 based boards there is a case, that
different devices on the board are supplied by different regulators
with non-fixed voltages. If one of these devices temporarily requires
higher voltage, there might occur a situation that the spread between
devices' voltages is so high, that there is a risk of changing
'high' and 'low' states on the interconnection between devices powered
by those regulators.

Add new structure "coupling_desc" to regulator_dev, which contains
pointers to all coupled regulators including the owner of the structure,
number of coupled regulators and counter of currently resolved
regulators.

Add of_functions to parse all data needed in regulator coupling.
Provide method to check DTS data consistency. Check if each coupled
regulator's max_spread is equal and if their lists of regulators match.

Signed-off-by: Maciej Purski 
Signed-off-by: Mark Brown

regulator: add PM suspend and resume hooks

2018-01-26T14:43:55+00:00

In this patch, consumers are allowed to set suspend voltage, and this
actually just set the "uV" in constraint::regulator_state, when the
regulator_suspend_late() was called by PM core through callback when
the system is entering into suspend, the regulator device would act
suspend activity then.

And it assumes that if any consumer set suspend voltage, the regulator
device should be enabled in the suspend state.  And if the suspend
voltage of a regulator device for all consumers was set zero, the
regulator device would be off in the suspend state.

This patch also provides a new function hook to regulator devices for
resuming from suspend states.

Signed-off-by: Chunyan Zhang 
Signed-off-by: Mark Brown

regulator: empty the old suspend functions

2018-01-26T14:43:51+00:00

Regualtor suspend/resume functions should only be called by PM suspend
core via registering dev_pm_ops, and regulator devices should implement
the callback functions.  Thus, any regulator consumer shouldn't call
the regulator suspend/resume functions directly.

In order to avoid compile errors, two empty functions with the same name
still be left for the time being.

Signed-off-by: Chunyan Zhang 
Signed-off-by: Mark Brown

regulator: leave one item to record whether regulator is enabled

2018-01-26T14:43:46+00:00

The items "disabled" and "enabled" are a little redundant, since only one
of them would be set to record if the regulator device should keep on
or be switched to off in suspend states.

So in this patch, the "disabled" was removed, only leave the "enabled":
  - enabled == 1 for regulator-on-in-suspend
  - enabled == 0 for regulator-off-in-suspend
  - enabled == -1 means do nothing when entering suspend mode.

Signed-off-by: Chunyan Zhang 
Signed-off-by: Mark Brown

regulator: Allow for asymmetric settling times

2017-05-17T09:49:25+00:00

Some regulators have different settling times for voltage increases and
decreases. To avoid a time penalty on the faster transition allow for
different settings for up- and downward transitions.

Signed-off-by: Matthias Kaehlcke 
Acked-by: Laxman Dewangan 
Signed-off-by: Mark Brown

Merge remote-tracking branches 'regulator/topic/notifier', 'regulator/topic/pfuze100', 'regulator/topic/settle', 'regulator/topic/tps65132' and 'regulator/topic/twl6030' into regulator-next

2017-04-30T13:17:36+00:00

regulator: Add settling time for non-linear voltage transition

2017-04-05T17:25:10+00:00

Some regulators (some PWM regulators) have the voltage transition
non-linear i.e. exponentially. On such cases, the settling time
for voltage transition can not be presented in the voltage-ramp-delay.

Add new property for non-linear voltage transition and handle this
in getting the voltage settling time.

Signed-off-by: Laxman Dewangan 
Signed-off-by: Mark Brown

scripts/spelling.txt: add "disble(d)" pattern and fix typo instances

2017-03-10T01:01:09+00:00

Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

regulator: add missing description for set_over_current_protection

2016-03-23T13:38:23+00:00

Over current protection is missing descriptions for documentation.

Signed-off-by: Luis de Bethencourt 
Signed-off-by: Mark Brown

regulator: core: Add support for active-discharge configuration

2016-03-02T14:13:05+00:00

Add support to enable/disable active discharge of regulator via
machine constraints. This configuration is done when setting
machine constraint during regulator register and if regulator
driver implemented the callback ops.

Signed-off-by: Laxman Dewangan 
Signed-off-by: Mark Brown