The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the PCA9450 doesn't handle the assertion of the WDOG_B signal, but this is required to guarantee that things like software resets triggered by the watchdog work reliably. As we don't want to rely on the bootloader to enable this, we tell the PMIC to issue a cold reset in case the WDOG_B signal is asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6315 is a regulator found on boards based on MediaTek MT8192 and probably other SoCs. It connects as a slave to SoC using SPMI. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing stubs to regulator/consumer.h in order to fix COMPILE_TEST of the kernel. In particular this should fix compile-testing of OPP core because of a missing stub for regulator_sync_voltage(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120205844.12658-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
The platform data header was only used to pass platform data from board files. We now populate the regulators exclusively from device tree, so the header contents can be moved into the regulator drivers. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
The struct ab8500_regulator_platform_data was a leftover since the days before we probed all regulators from the device tree. The ab8500-ext regulator was the only used, defining platform data and register intialization that was never used for anything, a copy of a boardfile no longer in use. Delete the ab8500_regulator_platform_data and make the ab8500-ext regulator reference the regulator init data in the local file directly. We are 100% device tree these days. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201210212748.5849-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add devicetree configuration and device variant parameters. Use the latter to enable the check and use of parameters specific to dual buck variants. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/5849ce60595aef1018bdde7dcfb54a7397597545.1606755367.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add ability to probe device and validate configuration, then apply a regmap configuration for a single or dual buck device accordingly. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/068c6b8d5e1b4e221e899e4c914c429429a2ec7d.1606755367.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>