linux-toradex.git/include/linux/rio_regs.h, branch v2.6.38.6

rapidio: fix sysfs config attribute to access 16MB of maint space

2011-02-25T23:07:37+00:00

Fixes sysfs config attribute to allow access to entire 16MB maintenance
space of RapidIO devices.

Signed-off-by: Alexandre Bounine 
Cc: Kumar Gala 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Thomas Moll 
Cc: Micha Nelissen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: fix IDLE2 bits corruption

2010-10-28T01:03:16+00:00

RapidIO spec v.2.1 adds Idle Sequence 2 into LP-Serial Physical Layer.
The fix ensures that corresponding bits are not corrupted during error
handling.

Signed-off-by: Alexandre Bounine 
Cc: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Micha Nelissen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add support for IDT CPS Gen2 switches

2010-10-28T01:03:16+00:00

Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616
Gen2 devices.

Signed-off-by: Alexandre Bounine 
Cc: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Micha Nelissen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add default handler for error-stopped state

2010-10-28T01:03:15+00:00

The default error-stopped state handler provides recovery mechanism as
defined by RIO specification.

Signed-off-by: Alexandre Bounine 
Cc: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Micha Nelissen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: use stored ingress port number instead of register read

2010-10-28T01:03:15+00:00

The switch port information is obtained and stored during RIO device
setup.  Therefore repeated reads from Switch Port Information CAR may be
removed.

Signed-off-by: Alexandre Bounine 
Cc: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Micha Nelissen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add enabling SRIO port RX and TX

2010-05-27T16:12:51+00:00

Add the functionality to enable Input receiver and Output transmitter of
every port, to allow non-maintenance traffic.

Signed-off-by: Thomas Moll 
Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add Port-Write handling for EM

2010-05-27T16:12:50+00:00

Add RapidIO Port-Write message handling in the context of Error
   Management Extensions Specification Rev.1.3.

Signed-off-by: Alexandre Bounine 
Tested-by: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add IDT CPS/TSI switches

2010-05-27T16:12:50+00:00

Extentions to RapidIO switch support:

1. modify switch route operation declarations to allow using single
   switch-specific file for family of switches that share the same route
   table operations.

2. add standard route table operations for switches that that support
   route table manipulation registers as defined in the Rev.1.3 of RapidIO
   specification.

3. add clear-route-table operation for switches

4. add CPSxx and TSIxxx families of RapidIO switches

Signed-off-by: Alexandre Bounine 
Tested-by: Thomas Moll 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] rapidio: core updates

2005-11-07T15:53:46+00:00

Addresses issues raised with the 2.6.12-rc6-mm1 RIO support.  Fix dma_mask
init, shrink some code, general cleanup.

Signed-off-by: Matt Porter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] RapidIO support: core includes

2005-11-07T15:53:46+00:00

Add RapidIO core include files.

The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.

Signed-off-by: Matt Porter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds