linux-toradex.git/include/linux/sched.h, branch v3.10.15

Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction"

2013-08-29T16:47:39+00:00

commit 5ea80f76a56605a190a7ea16846c82aa63dbd0aa upstream.

This reverts commit df54d6fa54275ce59660453e29d1228c2b45a826.

The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.

In particular, the MATLAB Java runtime seems to be unhappy. See

  https://bugzilla.kernel.org/show_bug.cgi?id=60774

So we'll want to apply the random offset only once, and Radu has a patch
for that.  Revert this older commit in order to apply the other one.

Reported-by: Jeff Shorey 
Cc: Radu Caragea 
Cc: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

x86 get_unmapped_area(): use proper mmap base for bottom-up direction

2013-08-20T15:43:02+00:00

commit df54d6fa54275ce59660453e29d1228c2b45a826 upstream.

When the stack is set to unlimited, the bottomup direction is used for
mmap-ings but the mmap_base is not used and thus effectively renders
ASLR for mmapings along with PIE useless.

Reviewed-by: Rik van Riel 
Cc: Michel Lespinasse 
Cc: Oleg Nesterov 
Acked-by: Ingo Molnar 
Cc: Adrian Sendroiu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Merge git://git.infradead.org/users/eparis/audit

2013-05-11T21:29:11+00:00

Pull audit changes from Eric Paris:
 "Al used to send pull requests every couple of years but he told me to
  just start pushing them to you directly.

  Our touching outside of core audit code is pretty straight forward.  A
  couple of interface changes which hit net/.  A simple argument bug
  calling audit functions in namei.c and the removal of some assembly
  branch prediction code on ppc"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: fix message spacing printing auid
  Revert "audit: move kaudit thread start from auditd registration to kaudit init"
  audit: vfs: fix audit_inode call in O_CREAT case of do_last
  audit: Make testing for a valid loginuid explicit.
  audit: fix event coverage of AUDIT_ANOM_LINK
  audit: use spin_lock in audit_receive_msg to process tty logging
  audit: do not needlessly take a lock in tty_audit_exit
  audit: do not needlessly take a spinlock in copy_signal
  audit: add an option to control logging of passwords with pam_tty_audit
  audit: use spin_lock_irqsave/restore in audit tty code
  helper for some session id stuff
  audit: use a consistent audit helper to log lsm information
  audit: push loginuid and sessionid processing down
  audit: stop pushing loginid, uid, sessionid as arguments
  audit: remove the old depricated kernel interface
  audit: make validity checking generic
  audit: allow checking the type of audit message in the user filter
  audit: fix build break when AUDIT_DEBUG == 2
  audit: remove duplicate export of audit_enabled
  Audit: do not print error when LSMs disabled
  ...

Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-block

2013-05-08T18:51:05+00:00

Pull block driver updates from Jens Axboe:
 "It might look big in volume, but when categorized, not a lot of
  drivers are touched.  The pull request contains:

   - mtip32xx fixes from Micron.

   - A slew of drbd updates, this time in a nicer series.

   - bcache, a flash/ssd caching framework from Kent.

   - Fixes for cciss"

* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
  bcache: Use bd_link_disk_holder()
  bcache: Allocator cleanup/fixes
  cciss: bug fix to prevent cciss from loading in kdump crash kernel
  cciss: add cciss_allow_hpsa module parameter
  drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
  mtip32xx: Workaround for unaligned writes
  bcache: Make sure blocksize isn't smaller than device blocksize
  bcache: Fix merge_bvec_fn usage for when it modifies the bvm
  bcache: Correctly check against BIO_MAX_PAGES
  bcache: Hack around stuff that clones up to bi_max_vecs
  bcache: Set ra_pages based on backing device's ra_pages
  bcache: Take data offset from the bdev superblock.
  mtip32xx: mtip32xx: Disable TRIM support
  mtip32xx: fix a smatch warning
  bcache: Disable broken btree fuzz tester
  bcache: Fix a format string overflow
  bcache: Fix a minor memory leak on device teardown
  bcache: Documentation updates
  bcache: Use WARN_ONCE() instead of __WARN()
  bcache: Add missing #include 
  ...

aio: don't include aio.h in sched.h

2013-05-08T03:16:25+00:00

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet 
Cc: Zach Brown 
Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Rusty Russell 
Cc: Jens Axboe 
Cc: Asai Thambi S P 
Cc: Selvan Mani 
Cc: Sam Bradshaw 
Cc: Jeff Moyer 
Cc: Al Viro 
Cc: Benjamin LaHaise 
Reviewed-by: "Theodore Ts'o" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2013-05-05T20:23:27+00:00

Pull 'full dynticks' support from Ingo Molnar:
"This tree from Frederic Weisbecker adds a new, (exciting! :-) core
kernel feature to the timer and scheduler subsystems: 'full dynticks',
or CONFIG_NO_HZ_FULL=y.

This feature extends the nohz variable-size timer tick feature from
idle to busy CPUs (running at most one task) as well, potentially
reducing the number of timer interrupts significantly.

This feature got motivated by real-time folks and the -rt tree, but
the general utility and motivation of full-dynticks runs wider than
that:

- HPC workloads get faster: CPUs running a single task should be able
to utilize a maximum amount of CPU power. A periodic timer tick at
HZ=1000 can cause a constant overhead of up to 1.0%. This feature
removes that overhead - and speeds up the system by 0.5%-1.0% on
typical distro configs even on modern systems.

- Real-time workload latency reduction: CPUs running critical tasks
should experience as little jitter as possible. The last remaining
source of kernel-related jitter was the periodic timer tick.

- A single task executing on a CPU is a pretty common situation,
especially with an increasing number of cores/CPUs, so this feature
helps desktop and mobile workloads as well.

The cost of the feature is mainly related to increased timer
reprogramming overhead when a CPU switches its tick period, and thus
slightly longer to-idle and from-idle latency.

Configuration-wise a third mode of operation is added to the existing
two NOHZ kconfig modes:

- CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
as a config option. This is the traditional Linux periodic tick
design: there's a HZ tick going on all the time, regardless of
whether a CPU is idle or not.

- CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
periodic tick when a CPU enters idle mode.

- CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
tick when a CPU is idle, also slows the tick down to 1 Hz (one
timer interrupt per second) when only a single task is running on a
CPU.

The .config behavior is compatible: existing !CONFIG_NO_HZ and
CONFIG_NO_HZ=y settings get translated to the new values, without the
user having to configure anything. CONFIG_NO_HZ_FULL is turned off by
default.

This feature is based on a lot of infrastructure work that has been
steadily going upstream in the last 2-3 cycles: related RCU support
and non-periodic cputime support in particular is upstream already.

This tree adds the final pieces and activates the feature. The pull
request is marked RFC because:

- it's marked 64-bit only at the moment - the 32-bit support patch is
small but did not get ready in time.

- it has a number of fresh commits that came in after the merge
window. The overwhelming majority of commits are from before the
merge window, but still some aspects of the tree are fresh and so I
marked it RFC.

- it's a pretty wide-reaching feature with lots of effects - and
while the components have been in testing for some time, the full
combination is still not very widely used. That it's default-off
should reduce its regression abilities and obviously there are no
known regressions with CONFIG_NO_HZ_FULL=y enabled either.

- the feature is not completely idempotent: there is no 100%
equivalent replacement for a periodic scheduler/timer tick. In
particular there's ongoing work to map out and reduce its effects
on scheduler load-balancing and statistics. This should not impact
correctness though, there are no known regressions related to this
feature at this point.

- it's a pretty ambitious feature that with time will likely be
enabled by most Linux distros, and we'd like you to make input on
its design/implementation, if you dislike some aspect we missed.
Without flaming us to crisp! :-)

Future plans:

- there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
the periodic tick altogether when there's a single busy task on a
CPU. We'd first like 1 Hz to be exposed more widely before we go
for the 0 Hz target though.

- once we reach 0 Hz we can remove the periodic tick assumption from
nr_running>=2 as well, by essentially interrupting busy tasks only
as frequently as the sched_latency constraints require us to do -
once every 4-40 msecs, depending on nr_running.

I am personally leaning towards biting the bullet and doing this in
v3.10, like the -rt tree this effort has been going on for too long -
but the final word is up to you as usual.

More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
sched: Keep at least 1 tick per second for active dynticks tasks
rcu: Fix full dynticks' dependency on wide RCU nocb mode
nohz: Protect smp_processor_id() in tick_nohz_task_switch()
nohz_full: Add documentation.
cputime_nsecs: use math64.h for nsec resolution conversion helpers
nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
nohz: Reduce overhead under high-freq idling patterns
nohz: Remove full dynticks' superfluous dependency on RCU tree
nohz: Fix unavailable tick_stop tracepoint in dynticks idle
nohz: Add basic tracing
nohz: Select wide RCU nocb for full dynticks
nohz: Disable the tick when irq resume in full dynticks CPU
nohz: Re-evaluate the tick for the new task after a context switch
nohz: Prepare to stop the tick on irq exit
nohz: Implement full dynticks kick
nohz: Re-evaluate the tick from the scheduler IPI
sched: New helper to prevent from stopping the tick in full dynticks
sched: Kick full dynticks CPU that have more than one task enqueued.
perf: New helper to prevent full dynticks CPUs from stopping tick
perf: Kick full dynticks CPU if events rotation is needed
...

sched: Keep at least 1 tick per second for active dynticks tasks

2013-05-04T06:32:02+00:00

The scheduler doesn't yet fully support environments
with a single task running without a periodic tick.

In order to ensure we still maintain the duties of scheduler_tick(),
keep at least 1 tick per second.

This makes sure that we keep the progression of various scheduler
accounting and background maintainance even with a very low granularity.
Examples include cpu load, sched average, CFS entity vruntime,
avenrun and events such as load balancing, amongst other details
handled in sched_class::task_tick().

This limitation will be removed in the future once we get
these individual items to work in full dynticks CPUs.

Suggested-by: Ingo Molnar 
Signed-off-by: Frederic Weisbecker 
Cc: Christoph Lameter 
Cc: Hakan Akkan 
Cc: Ingo Molnar 
Cc: Kevin Hilman 
Cc: Li Zhong 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: Thomas Gleixner

Merge commit '8700c95adb03' into timers/nohz

2013-05-02T15:54:19+00:00

The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
	include/linux/perf_event.h
	kernel/rcutree.h
	kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker

exec: do not abuse ->cred_guard_mutex in threadgroup_lock()

2013-05-01T00:04:07+00:00

threadgroup_lock() takes signal->cred_guard_mutex to ensure that
thread_group_leader() is stable.  This doesn't look nice, the scope of
this lock in do_execve() is huge.

And as Dave pointed out this can lead to deadlock, we have the
following dependencies:

	do_execve:		cred_guard_mutex -> i_mutex
	cgroup_mount:		i_mutex -> cgroup_mutex
	attach_task_by_pid:	cgroup_mutex -> cred_guard_mutex

Change de_thread() to take threadgroup_change_begin() around the
switch-the-leader code and change threadgroup_lock() to avoid
->cred_guard_mutex.

Note that de_thread() can't sleep with ->group_rwsem held, this can
obviously deadlock with the exiting leader if the writer is active, so it
does threadgroup_change_end() before schedule().

Reported-by: Dave Jones 
Acked-by: Tejun Heo 
Acked-by: Li Zefan 
Signed-off-by: Oleg Nesterov 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

coredump: only SIGKILL should interrupt the coredumping task

2013-05-01T00:04:06+00:00

There are 2 well known and ancient problems with coredump/signals, and a
lot of related bug reports:

- do_coredump() clears TIF_SIGPENDING but of course this can't help
  if, say, SIGCHLD comes after that.

  In this case the coredump can fail unexpectedly. See for example
  wait_for_dump_helper()->signal_pending() check but there are other
  reasons.

- At the same time, dumping a huge core on the slow media can take a
  lot of time/resources and there is no way to kill the coredumping
  task reliably. In particular this is not oom_kill-friendly.

This patch tries to fix the 1st problem, and makes the preparation for the
next changes.

We add the new SIGNAL_GROUP_COREDUMP flag set by zap_threads() to indicate
that this process dumps the core.  prepare_signal() checks this flag and
nacks any signal except SIGKILL.

Note that this check tries to be conservative, in the long term we should
probably treat the SIGNAL_GROUP_EXIT case equally but this needs more
discussion.  See marc.info/?l=linux-kernel&m=120508897917439

Notes:
	- recalc_sigpending() doesn't check SIGNAL_GROUP_COREDUMP.
	  The patch assumes that dump_write/etc paths should never
	  call it, but we can change it as well.

	- There is another source of TIF_SIGPENDING, freezer. This
	  will be addressed separately.

Signed-off-by: Oleg Nesterov 
Tested-by: Mandeep Singh Baines 
Cc: Ingo Molnar 
Cc: Neil Horman 
Cc: "Rafael J. Wysocki" 
Cc: Roland McGrath 
Cc: Tejun Heo 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds