linux-toradex.git/include/linux/seccomp.h, branch tegra-10.9.9

needs to include .

2009-04-19T17:47:45+00:00

 uses EINVAL so should include .  This
fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled.

Signed-off-by: Ralf Baechle 
Signed-off-by: Linus Torvalds

make seccomp zerocost in schedule

2007-07-16T16:05:50+00:00

This follows a suggestion from Chuck Ebbert on how to make seccomp
absolutely zerocost in schedule too.  The only remaining footprint of
seccomp is in terms of the bzImage size that becomes a few bytes (perhaps
even a few kbytes) larger, measure it if you care in the embedded.

Signed-off-by: Andrea Arcangeli 
Cc: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

move seccomp from /proc to a prctl

2007-07-16T16:05:50+00:00

This reduces the memory footprint and it enforces that only the current
task can enable seccomp on itself (this is a requirement for a
strightforward [modulo preempt ;) ] TIF_NOTSC implementation).

Signed-off-by: Andrea Arcangeli 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Don't include linux/config.h from anywhere else in include/

2006-04-26T11:56:16+00:00

Signed-off-by: David Woodhouse

[PATCH] remove gcc-2 checks

2006-01-09T04:14:02+00:00

Remove various things which were checking for gcc-1.x and gcc-2.x compilers.

From: Adrian Bunk 

    Some documentation updates and removes some code paths for gcc < 3.2.

Acked-by: Russell King 
Signed-off-by: Adrian Bunk 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] seccomp: tsc disable

2005-06-27T22:11:44+00:00

I believe at least for seccomp it's worth to turn off the tsc, not just for
HT but for the L2 cache too.  So it's up to you, either you turn it off
completely (which isn't very nice IMHO) or I recommend to apply this below
patch.

This has been tested successfully on x86-64 against current cogito
repository (i686 compiles so I didn't bother testing ;).  People selling
the cpu through cpushare may appreciate this bit for a peace of mind.

There's no way to get any timing info anymore with this applied
(gettimeofday is forbidden of course).  The seccomp environment is
completely deterministic so it can't be allowed to get timing info, it has
to be deterministic so in the future I can enable a computing mode that
does a parallel computing for each task with server side transparent
checkpointing and verification that the output is the same from all the 2/3
seller computers for each task, without the buyer even noticing (for now
the verification is left to the buyer client side and there's no
checkpointing, since that would require more kernel changes to track the
dirty bits but it'll be easy to extend once the basic mode is finished).

Eliminating a cold-cache read of the cr4 global variable will save one
cacheline during the tlb flush while making the code per-cpu-safe at the
same time.  Thanks to Mikael Pettersson for noticing the tlb flush wasn't
per-cpu-safe.

The global tlb flush can run from irq (IPI calling do_flush_tlb_all) but
it'll be transparent to the switch_to code since the IPI won't make any
change to the cr4 contents from the point of view of the interrupted code
and since it's now all per-cpu stuff, it will not race.  So no need to
disable irqs in switch_to slow path.

Signed-off-by: Andrea Arcangeli 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Linux-2.6.12-rc2

2005-04-16T22:20:36+00:00

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!