linux-toradex.git/include/linux/sem.h, branch v5.1-rc1

sem: Move struct sem and struct sem_array into ipc/sem.c

2018-03-23T02:30:56+00:00

All of the users are now in ipc/sem.c so make the definitions
local to that file to make code maintenance easier.  AKA
to prevent rebuilding the entire kernel when one of these
files is changed.

Signed-off-by: "Eric W. Biederman"

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-09-15T00:37:26+00:00

Pull ipc compat cleanup and 64-bit time_t from Al Viro:
 "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
  Dinamani"

* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  utimes: Make utimes y2038 safe
  ipc: shm: Make shmid_kernel timestamps y2038 safe
  ipc: sem: Make sem_array timestamps y2038 safe
  ipc: msg: Make msg_queue timestamps y2038 safe
  ipc: mqueue: Replace timespec with timespec64
  ipc: Make sys_semtimedop() y2038 safe
  get rid of SYSVIPC_COMPAT on ia64
  semtimedop(): move compat to native
  shmat(2): move compat to native
  msgrcv(2), msgsnd(2): move compat to native
  ipc(2): move compat to native
  ipc: make use of compat ipc_perm helpers
  semctl(): move compat to native
  semctl(): separate all layout-dependent copyin/copyout
  msgctl(): move compat to native
  msgctl(): split the actual work from copyin/copyout
  ipc: move compat shmctl to native
  shmctl: split the work from copyin/copyout

ipc: sem: Make sem_array timestamps y2038 safe

2017-09-04T00:24:29+00:00

time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.

Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.

The syscall interface themselves are not changed as part of
the patch. They will be part of a different series.

Signed-off-by: Deepa Dinamani 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Al Viro

Merge tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2017-07-19T15:55:18+00:00

Pull structure randomization updates from Kees Cook:
 "Now that IPC and other changes have landed, enable manual markings for
  randstruct plugin, including the task_struct.

  This is the rest of what was staged in -next for the gcc-plugins, and
  comes in three patches, largest first:

   - mark "easy" structs with __randomize_layout

   - mark task_struct with an optional anonymous struct to isolate the
     __randomize_layout section

   - mark structs to opt _out_ of automated marking (which will come
     later)

  And, FWIW, this continues to pass allmodconfig (normal and patched to
  enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and
  s390 for me"

* tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  randstruct: opt-out externally exposed function pointer structs
  task_struct: Allow randomized layout
  randstruct: Mark various structs for randomization

include/linux/sem.h: correctly document sem_ctime

2017-07-12T23:26:01+00:00

sem_ctime is initialized to the semget() time and then updated at every
semctl() that changes the array.

Thus it does not represent the time of the last change.

Especially, semop() calls are only stored in sem_otime, not in
sem_ctime.

This is already described in ipc/sem.c, I just overlooked that there is
a comment in include/linux/sem.h and man semctl(2) as well.

So: Correct wrong comments.

Link: http://lkml.kernel.org/r/20170515171912.6298-4-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Cc: Kees Cook 
Cc: <1vier1@web.de>
Cc: Davidlohr Bueso 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Fabian Frederick 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/sem.c: remove sem_base, embed struct sem

2017-07-12T23:26:01+00:00

sma->sem_base is initialized with

	sma->sem_base = (struct sem *) &sma[1];

The current code has four problems:
 - There is an unnecessary pointer dereference - sem_base is not needed.
 - Alignment for struct sem only works by chance.
 - The current code causes false positive for static code analysis.
 - This is a cast between different non-void types, which the future
   randstruct GCC plugin warns on.

And, as bonus, the code size gets smaller:

  Before:
    0 .text         00003770
  After:
    0 .text         0000374e

[manfred@colorfullife.com: s/[0]/[]/, per hch]
  Link: http://lkml.kernel.org/r/20170525185107.12869-2-manfred@colorfullife.com
Link: http://lkml.kernel.org/r/20170515171912.6298-2-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Acked-by: Kees Cook 
Cc: Kees Cook 
Cc: <1vier1@web.de>
Cc: Davidlohr Bueso 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Fabian Frederick 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

randstruct: Mark various structs for randomization

2017-06-30T19:00:51+00:00

This marks many critical kernel structures for randomization. These are
structures that have been targeted in the past in security exploits, or
contain functions pointers, pointers to function pointer tables, lists,
workqueues, ref-counters, credentials, permissions, or are otherwise
sensitive. This initial list was extracted from Brad Spengler/PaX Team's
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.

Left out of this list is task_struct, which requires special handling
and will be covered in a subsequent patch.

Signed-off-by: Kees Cook

sysv,ipc: cacheline align kern_ipc_perm

2017-05-09T00:15:12+00:00

Assign 'struct kern_ipc_perm' its own cacheline to avoid false sharing
with sysv ipc calls.

While the structure itself is rather read-mostly throughout the lifespan
of ipc, the spinlock causes most of the invalidations.  One example is
commit 31a7c4746e9 ("ipc/sem.c: cacheline align the ipc spinlock for
semaphores").  Therefore, extend this to all ipc.

The effect of cacheline alignment on sems can be seen in sembench, which
deals mostly with semtimedop wait/wakes is seen to improve raw
throughput (worker loops) between 8 to 12% on a 24-core x86 with over 4
threads.

Link: http://lkml.kernel.org/r/1486673582-6979-4-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso 
Cc: Manfred Spraul 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/sem: add hysteresis

2017-02-28T02:43:46+00:00

sysv sem has two lock modes: One with per-semaphore locks, one lock mode
with a single global lock for the whole array.  When switching from the
per-semaphore locks to the global lock, all per-semaphore locks must be
scanned for ongoing operations.

The patch adds a hysteresis for switching from the global lock to the
per semaphore locks.  This reduces how often the per-semaphore locks
must be scanned.

Compared to the initial patch, this is a simplified solution: Setting
USE_GLOBAL_LOCK_HYSTERESIS to 1 restores the current behavior.

In theory, a workload with exactly 10 simple sops and then one complex
op now scales a bit worse, but this is pure theory: If there is
concurrency, the it won't be exactly 10:1:10:1:10:1:...  If there is no
concurrency, then there is no need for scalability.

Link: http://lkml.kernel.org/r/1476851896-3590-3-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Cc: Peter Zijlstra 
Cc: Davidlohr Bueso 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: H. Peter Anvin 
Cc: <1vier1@web.de>
Cc: kernel test robot 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds