linux-toradex.git/include/linux/serial_core.h, branch v2.6.38.5 Linux kernel for Apalis and Colibri modules pps: unify timestamp gathering 2011-01-13T16:03:19+00:00 Alexander Gordeev lasaine@lvk.cs.msu.su 2011-01-13T01:00:50+00:00 6f4229b51106cbc859e9d8209b22c8a2ec749e64 Add a helper function to gather timestamps. This way clients don't have to duplicate it. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Add a helper function to gather timestamps.  This way clients don't have
to duplicate it.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Serial: Avoid unbalanced IRQ wake disable during resume 2010-12-16T21:14:32+00:00 Govindraj.R govindraj.raja@ti.com 2010-12-16T12:42:47+00:00 3f960dbb9dfe29ff283810624c4340c79fde87f5 To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled only when wakeups have been successfully enabled. Tested on OMAP3630SDP/ZOOM3. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled
only when wakeups have been successfully enabled.
Tested on OMAP3630SDP/ZOOM3.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
8250: add a UPIO_DWAPB32 for 32 bit accesses 2010-12-10T23:19:38+00:00 Jamie Iles jamie@jamieiles.com 2010-12-01T23:39:36+00:00 a3ae0fc34f58e7163b7724feb3d77aa4603f0dc3 Some platforms contain a Synopsys DesignWare APB UART that is attached to a 32-bit APB bus where sub-word accesses are not allowed. Add a new IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART. v2: - don't test for 32 bit in the output fast path, provide a separate dwabp32_serial_out() function. Refactor dwabp_serial_out() so that we can reuse the LCR saving code. v3: - rebased on top of "8250: use container_of() instead of casting" Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Some platforms contain a Synopsys DesignWare APB UART that is attached
to a 32-bit APB bus where sub-word accesses are not allowed. Add a new
IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART.

v2:
	- don't test for 32 bit in the output fast path, provide a
	  separate dwabp32_serial_out() function. Refactor
	  dwabp_serial_out() so that we can reuse the LCR saving
	  code.
v3:
	- rebased on top of "8250: use container_of() instead of
	  casting"

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial: mpc52xx: make printout for type more generic 2010-11-16T20:50:18+00:00 Wolfram Sang w.sang@pengutronix.de 2010-11-12T18:47:47+00:00 e44dcb6c377529805bbaae505d5b333daab69111 The printout for the type should be just "5xxx", so 512x users won't wonder why they have a mpc52xx-type UART. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
The printout for the type should be just "5xxx", so 512x users won't
wonder why they have a mpc52xx-type UART.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial: Add support for UART on VIA VT8500 and compatibles 2010-11-11T19:35:57+00:00 Alexey Charkov alchark@gmail.com 2010-11-08T17:33:20+00:00 304e12665a4a7b8b25dfe8c64fa4fd56a04a67ea This adds a driver for the serial ports found in VIA and WonderMedia Systems-on-Chip. Interrupt-driven FIFO operation is implemented. The hardware also supports pure register-based operation (which is slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes long, DMA operation is probably not worth the hassle. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This adds a driver for the serial ports found in VIA and WonderMedia
Systems-on-Chip. Interrupt-driven FIFO operation is implemented.
The hardware also supports pure register-based operation (which is
slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes
long, DMA operation is probably not worth the hassle.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25T20:46:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2010-10-25T20:46:56+00:00 7b6181e06841f5ad15c4ff708b967b4db65a64de * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony 
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
8250: allow platforms to override PM hook. 2010-10-22T17:20:09+00:00 Manuel Lauss manuel.lauss@googlemail.com 2010-09-25T13:13:45+00:00 c161afe9759ddcc174d08e7c4f683d08ac9ba86f Add a hook for platforms to specify custom pm methods. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add a hook for platforms to specify custom pm methods.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial: Factor out uart_poll_timeout() from 8250 driver 2010-10-22T17:20:07+00:00 Anton Vorontsov cbouatmailru@gmail.com 2010-10-01T13:21:25+00:00 54381067ed7873e6173d6fe32818a585ad667723 Soon we will use that handy function in the altera_uart driver. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Soon we will use that handy function in the altera_uart driver.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial: Add OMAP high-speed UART driver 2010-09-29T19:43:02+00:00 Govindraj.R govindraj.raja@ti.com 2010-09-27T14:50:49+00:00 b612633b5928077441b979471869753bfa93d41a This patch adds driver support for OMAP2/3/4 high speed UART. The driver is made separate from 8250 driver as we cannot over load 8250 driver with omap platform specific configuration for features like DMA, it makes easier to implement features like DMA and hardware flow control and software flow control configuration with this driver as required for the omap-platform. This patch involves only the core driver and its dependent. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> 
This patch adds driver support for OMAP2/3/4 high speed UART.

The driver is made separate from 8250 driver as we cannot
over load 8250 driver with omap platform specific configuration for
features like DMA, it makes easier to implement features like DMA and
hardware flow control and software flow control configuration with
this driver as required for the omap-platform.
This patch involves only the core driver and its dependent.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
serial: fix port type conflict between NS16550A & U6_16550A 2010-09-04T00:29:04+00:00 Philippe Langlais philippe.langlais@stericsson.com 2010-08-31T12:19:09+00:00 71cad0554956de87c3fc413b1eac9313887eb14f Bug seen by Dr. David Alan Gilbert with sparse Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Bug seen by Dr. David Alan Gilbert with sparse

Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>